E2 RSP 3.17b TDT 1142

[flatline]

Hi,

my ufs910 and my TV are connected via HDMI.

Unfortunatelly, if I select (during the initial startup) or later via the menues the video output to HDMI, the TV reports 'No HDMI signal' and there is no TV-picture at all.

My current settings for video output is therefor 'component'. And with this all works fine. Any hint, what the HDMI-problem may be ?

Btw. not a single dump until now :-). A really stable image !

Thanks to you and the TDT-team!


Regards, flatline

[javier3034]

care folositi mbox5, trebuie schimbat in mbox5.cfg in D: { 4 }, ea este D: { 3 } in fisierul downloadat din panel.

Dear amorak,

This is for work the 2 emus at the same time, mbox-4 and mbox-5?

Thank your

[amorak]

not at all javier3034. there was an configuration error in mbox5.cfg, which is for mbox5 only, you can't run both mbox4 and mbox5 same time.

[cortorent]

Stiti cumva de ce nu merge FTV HD pe 9E cu aceasta imagine ?
La mine acelasi canal cu AAF 2.0e merge foarte bine, nu sunt probleme de semnal. Am incercat cam toate variantele de "extraparametri" de configurare si tot nu merge, adica merge 1min si se blocheaza receiverul.
Ma poate ajuta cineva ?

[mario08]

Felicitari , celor trei maestrii...

[p.irmas]

Thanks for this image. Can't make incubus to connect to newcamd server. Any example how to configure?

[zildan]

[Prov:0021xx:CaID:1x1]
decoder_type=1
card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314

[p.irmas]

[Prov:0021xx:CaID:1x1]
decoder_type=1
card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314

I need to connect to 5 deferent servers and providers. Is it correct?
card_server_url_0=newcamd:
card_server_url_1=newcamd:
card_server_url_2=newcamd:
card_server_url_3=newcamd:
card_server_url_4=newcamd:

thank you for aswers.

[cortorent]

revin cu intrebarea despre FTV HD pe 9E ... stiti cumva de ce nu merge ?

[mesteru]

FTV HD pe 9E .......MERGE ....am testat si e ok[IMG][/IMG]

[dreanew]

[Prov:0021xx:CaID:1x1]
decoder_type=1
card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314

It's very difficult to parameter incubuscamd

my results

Kathy_RSP:~# ECM[di:1] **** [Mon May 11 10:34:31 2009] Start processing ECM...
CaID: 0500 - Viaccess.
Provider ID: 000000 - Supported.
Raw Encrypted ECM:
81 70 25 00 90 03 03 29 28 E0 01 20 EA 10 3B BF
ED D2 47 08 03 58 75 99 6D E8 DA 81 06 E7 F0 08
C9 58 C3 FA 7A B1 26 52

Decoder: Using Newcamd protocol card-server.

cam[di:1]: [Newcamd] Control words received successfully.

Control words:
CW0 ( SET): C0 01 84 45 66 40 39 DF
CW1 (NOT SET): 55 FC 05 56 84 9C BC DC

I don't understand this result with these control words ( of course i've black screen)

Could you help us

[cortorent]

pai aparent merge si la mine FTV HD insa dupa 2min sonorul incepe mai intii sa se intrerupa, mai apoi imaginea ... si pe urma se blocheaza receiverul.

am reincarcat lista de programe cu UPDATE si face la fel ...

problema este ca in rest merge foarte bine pe toate canalele si nu am nici un ecran verde, se pare ca este cea mai stabila imagine ... insa cu FTV HD nu reusesc ...

acelasi aparat cu AAF 2.0e merge foarte bine pe FTV HD

[mario08]

@cortorent si la mine merge canalul...mai instaleaza inca o data...Bafta !

[ionutz6]

da, si la mine face la fel, are intreruperi din cand in cand, si la sonor, si la imagine, iar dupa cateva minute s-a intrerupt de tot..
noroc ca nu ma omor dupa p[ostul asta, ftv hd...

in schimb nu prea ma convinge incubus0.82. cine stie care sunt diferentele fata de incubus0.55? ce il face asa special? ca 0.55 merge perfect, 0.82 nu. poate trebuie sa modific ceva la linii, dar vreau sa stiu daca merita...

[tic2000]

Faptul ca poti baga mai multe linii, nu doar una cum e cazul in 0.55