E2 RSP 3.17b TDT 1142

[javier3034]

Good work, thank your,

I format a one particion of 3 in ext3,

I install with KCC-3.2 in the partition ext3, I modifi in ba the bootp.conf:

ASSIGNUSBDEVICES=y
MOUNTDIFFERENT=0
BADEVICE=/dev/sda3
BADEVID=0:3
IPADDR=192.168.1.9
SERVERIP=192.168.1.20
GATEWAY=192.168.1.1
BOOTARGS=console=ttyAS0,115200 root=$badevice rw ip=$ipaddr:$serverip:$gateway:255.255.255.0:kathrein:eth0ff mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr init=/bin/devinit
BOOTCMD=usb reset;usb reset;ext3load usb $badevid a5000000 boot/uImage;bootm a5000000

But dont start de image, she a bucle and continius restart when arrive at ufs-910 restard a initial bootmenu, and repit the same all time.

What is my problem?

Is correct the "ext3load" in ba/ba/RSP-1141/bootp.conf?

Thank Your in advance for your help

Regards

[wambertos]

Shi apare shi ceasul in Stand by (o surpiza placuta despre care nu se vorbeshte in prezentarea Imaginei din primul post). Multumim lui Zildan shi echipei. E stabila shi merge foarte bine... Cine nu a instalat-o inca s-o faca mai de curand...

He he ...ceasul, in sfirsit...cite cereri a avut @zildan sa introduca ceasul...nici el nu mai stie.

[zildan]

@javier3034
For the image to work on an ext3 partition you don't have to edit bootp.conf.
Format ext3 fs partitions and install e2.

[javier3034]

thank your zildan,

Work very good,

I format a partition with:

busybox mke2fs -j /dev/sda3


And work good,
is correct this commands to format a partition in axt3 fs?


Regards

[zildan]

Use KCC 3.2 Experts.

[pauldemon]

Voi trei sunteti o super echipa!! Ca de obicei o imagine peste AAF si PTK!
Toate cele bune!!

[paulcl]

Installation is OK but I have no picture and no sound
I had the same problem with previous version but not with Black Pearl and PKT E2 images so nothing wrong with my Kathy.

[amorak]

care folositi mbox5, trebuie schimbat in mbox5.cfg in D: { 4 }, ea este D: { 3 } in fisierul downloadat din panel.

[tic2000]

Am urcat iar arhiva cu cfg-ul schimbat.

[tic2000]

Installation is OK but I have no picture and no sound
I had the same problem with previous version but not with Black Pearl and PKT E2 images so nothing wrong with my Kathy.

What channel, what emu, did you even tried FTA, etc. If you give no details you will get no solution. That if you actually want one.

[cornel638]

Super treaba baieti...bravo romanilor si Romaniei...
Cornel638

[tedugoroma]

Nu vreau sa fiu rautacios dar cel putin varianta aceasta este pentru romini sau tot ca pecedenta pentru rominii vorbitori de maghiara?

[afzalsher]

@Zildan,

Fantastic image. Is there a possibility to record to a CIFS connected HDD that is formatted in ext2?

Regards,
Afzal

[paulcl]

@tic2000
thanks for your reaction.
My problem is solved in the meantime by removing my CI module. When I insert it again, no picture and sound so this image is not working with my CI but for the rest pretty stable.

[sattekop]

I am still puzzled by the CI cams.
Both my CI Cams get recognised as viaccess and aston. However they do not work with the cards (SRG and CD) (in 4.49 AAF I could get the SD channels of SRG to work..., but that was last time)
Zildan, am I correct that only TDT can solve this matter?
Have you any info if this is on the priority list and being worked on?
Are there any work arounds ( I do not have another receiver).

The new image is great and works fine.
Would it be possible to add the plugin of officiallyme for the UKepg?
I had black screen at first startup, but OK at 2nd startup.