E2 RSP 3.17b TDT 1142

[zildan]

E2 RSP 3.17b TDT 1142



Stick Image for Kathrein UFS-910 1w or 14w

RSP menu on RED button. Former RED command was moved to PLAY

- A very good and up-to-date settings list (28E-30W)is included.
We will have frequently updated lists made by EnF70, settings you can download from RSP Panel
- We recommand you, still keep AC3 downmix on for stability and fewer (or even, no) green screens.
- We also recommend to format partitions with ext3 fs.
A few words on changes since the former E2 RSP 2.02 TDT 953:

TDT:

- new libplayer2
- enable keyboard and mouse support
- enigma2_01052009
- Switch to MediaPLayerExtended
- CSAT FR fix
- wma support
- mkv AAC
- vob support
- scan and recording both working
- all scan problems and "No SID in PAT", fixed


RSP:

- New WEBIF by tic2000
- RSP panel reaction speed increased
- Name server issue, fixed
- Intelligent EMU management:
- each time you choose emu install, latest revision of EMU on server are checked and menu is redesigned, to include them
- in the emu start/stop menu you will see only those that you have installed
- you cannot re-install an emu if you don't remove it first
- "RECORD" labeled partition is automatically mounted on /hdd/movie; the other partitions are mounted in /tmp/[device]
- when mounting the HDD you can see only valid Linux partition
- it supports cifs; you have to enable it in the menu and edit the configuration file (var/config/amnt.cfg) using the appropriate PC IP address,
login username and password and the folder name you want to mount.



Imagine de stick pentru Kathrein UFS-910 variantele de 14w si 1w
Meniul RSP este pe ROSU
Ce era pe rosu, e logic, acum e pe play ...

Bine de stiut... :
- imaginea contine o lista foarte buna si actuala (28E-30W). Periodic, vor exista pe serverul RSP, listele EnF70, cu care v-ati obisnuit deja,
permanent actualizate, pe care le veti putea descarca direct din RSP panel.
- va recomandam ca sa mentineti AC3 downmix ON pentru stabilitate si pentru a "vedea" cit mai putine ecrane verzi.
- mai recomandam sa formatati partitiile cu ext3 fs/

Citeva cuvinte legat de modificarile (noutatile) fata de imaginea E2 RSP 2.02 TDT 953:

TDT:

- libplayer2 - nou
- suport pentru tastatura si mouse
- kernel utilizat - enigma2_01052009
- MediaPLayerExtended inlocuieste vechiul MediaPlayer
- CSAT FR fix
- suporta WMA
- suporta mkv AAC
- suporta VOB
- scanarea si inregistrarea functionale
- toate problemele de scanare si "No SID in PAT", rezolvate

RSP:

- WEBIF tic2000 - NOU
- Panelul RSP rescris in proportie de 80%
- scalare autoamata in meniul emu install (se face verificare pe server la orice incercare de install emu si daca apare ceva nou poti instala)
- in Start/stop emu apar doar cele deja instalate
- nu se poate reinstala emu, fara ca in prealabil sa fi fost dezinstalat
- se face automount al partitiei cu eticheta RECORD in /hdd/movie
- la montarea HDD apar doar partitiile linux valide (in mod normal ar trebui sa montati doar sdb..)
- suport cifs inclus, se activeaza din meniu si se configureaza /var/config/amnt.cfg pentru a face automount, sunt necesare adresa IP a PC-ului,
numele de utilizator si parola de conectare, precum si numele subdirectorului Windows ce se doreste a fi montat.


zildan
tic2000
EnF70

E2 RSP 3.17b TDT 1142

http://www.sateliti-upload.info//ind...0%20Hd/Images&

[f11]

Merci mult maestre!!!
Trec la testat

f11

[hd56fox]

multam. trecem la treaba

[Discoman]

Mersi fain!

[wolfrick]

merci mult

[mesteru]

gata incubus 0.82 merge

[giol]

Thank you Zildan , trying it now.

[Maki_SM]

Thx RSP Team , alredy tested and i can say only :
very good and stable img

[wolfrick]

imagine foarte buna si rapida... felicitari
doua intrebari:
vede partitiile ntfs?
cum se mareste textul in subtitrari... subtitrarea mi se pare putin mica... sau poate ar trebui sa-mi iau niste ochelari....
merci

[afzalsher]

@Zildan

I need your help please. IncubusCamd 0.55 works for me conecting to a CCCam server, but the 0.82 does not. Any special change required in the conf file compared to the one that works with 0.55?

Do you intend to release a flash version of your image or not?

Regards,
Afzal

[zildan]

Download IncubusCamd.conf with RSP Pannel, (RSP menu > installer >Download Emu Config >Incu,,,).

[Prov:000000:CaID:0000]

decoder_type=1
card_server_url_0=cccam://myuser:mypasswd@servername.homelinux.com:12000
card_server_url_1=cccam://myuser22:mypasswd22@servername22.homelinux.com:120 00
card_server_url_2=cccam://myuser333:mypasswd333@servername333.homelinux.com: 12000



[Servers]


card_server_url=cccam://myuser:mypasswd@servername.homelinux.com:12000
card_server_url=cccam://myuser22:mypasswd22@servername22.homelinux.com:120 00
card_server_url=cccam://myuser333:mypasswd333@servername333.homelinux.com: 12000

[tony13]

@Hi Zildan can you help me I have installed the above image now 3 times and i have no remote functions can you help,as soon as I remove the stick XBA I have all the remote functions.this is how i istalled the image

1) reformatted the stick with hp format tool
2) back to expert setup
3) installed notefall 6 renamed stik with kathrein usf910 in lower case then installed aaf 2.0e image flash
4) reformat stick and renamed XBA and installed b/alan
5) installed boot image
6) then installed rsp 3.17 tdt in s/by mode as soon as I install the stick image I have no remote functions have you any idea what has gone wrong I have also tried other sticks as well ,but everything is working when the the stick not installed in the kathy

regds

[dieterp]

Hallo nach Rumaenien,

das Image läuft bei mir sehr stabil.
Leider bekomme ich das Mounten der USB-Festplatte und meiner Verzeichnisse am PC nicht hin.
Da ich die rumänische Sprache leider nicht beherrsche, wäre ich sehr dankbar, wenn mir jemand in Deutsch oder Englisch das Mounten erklären konnte.
In var\config habe ich zwar die beiden amount-Dateien entdeckt, weiß aber nicht,was ich dort eintragen muß.
Kann man auch nfs-mounten?

Mit vielen Grußen
dieter

[tic2000]

In /var/config edit amnt.cfg

cifssrv="192.168.1.110" <- IP of your PC
cifsdir="Livia" <- name of the share on your PC (Livia is my niece name)
cifsuser="user" <- user used to log on on your PC (in windows it's the name you see on the log on screen)
cifspass="pass" <- password for the user (if you don't have any just use cifspass = "")

Go to RSP Panel -> Disk Units and enable cifs.
Reboot.

If you did it right you should see the content of the folder in /mnt/hdd

Please use English in this section of the forum.

[dieterp]

Hallo tic2000,

many thanks for your answer.
Now its ok.

best regards

dieterp