Multumesc, tocmai asta incercam sa fac, sa-l actualizez in PC. Si da, inteleg Engleza, ce nu intelegeam era: de ce programele alea nu reusesc sa vada cardul.

Dar m-am prins, era o PBCK (Problem Between Chair and Keyboard): nu am stiut ca trebuie drivere. Desi Windows tot ma ruga sa bag un driver de fiecare data cand cuplam Smargo, iar eu, fire insensibila, tot il tratam cu refuz.

OK, acum l-am actualizat cu setarile luate de la http://www.sateliti.info/showthread.php?t=16970:
Mode : Fixed
Frequency : 3,69
Kernel : Dreambox
T-Mode : T=0
EGT : 1

Dar m-am blocat la urmatorul pas: sa-l fac sa mearga in Newcs (1.67), nu reuseste sa-l reseteze daca "carddetect" este Yes. Configuratia o am asa:

Code:
<readers name="Standard Phoenix on PC">
        <device>
                <name>Phoenix on USB</name>
                <type>smartreader+</type>
                <mhz>369</mhz>
                <node>/dev/ttyUSB0</node>
                <parity>none</parity>
                <reset>normal</reset>
                <export>Yes</export>
                <enabled>Yes</enabled>
                <blocksa>No</blocksa>
                <blockua>No</blockua>
                <blockga>No</blockga>
                <blockC0>Yes</blockC0>
                <carddetect>Yes</carddetect>
                <newcamd_port>15050</newcamd_port>
                <autosid>Yes</autosid>
                <pincode>0000</pincode>
                <priority>hard</priority>
                <PTShandshake>No</PTShandshake>
                <Seca-PPV>no</Seca-PPV>
        </device>
</readers>
Cand pornesc newcs in foreground imi tot cicleaza asa fara intrerupere:

Code:
[ 10:39:09 ] [ Loader ] Reset failed ...
[ 10:39:09 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 10:39:09 ] [ CardMan ] Reseting reader parameters
[ 10:39:09 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 10:39:09 ] [ Phoenix ] Setting Parity to: NONE
[ 10:39:09 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 10:39:09 ] [ Phoenix ] Setting Baud to standard 9600
[ 10:39:10 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
Daca pun "carddetect" pe "No", atunci nu mai aprare "Reset failed...", dar din mgcamd tot nu imi deschide nimic.

Cardul din reader e un Seca3 de la Canal Digitaal NL. Nu stiu cum sa verific daca mai e activat sau nu, dar oricum ar trebui sa-mi dea acces la cateva posturi nationale FTA.

Sugestii?