Gammacard How to

[me1960]

CREATE YOUR OWN GAMFILE-HOW TO

download :

http://rapidshare.de/files/47873339/...ow_to.rar.html

[me1960]

Gammaloader Tools


download :

http://rapidshare.de/files/47886363/..._fast.rar.html

[me1960]

How to create Gamma Update, (Commands)

'' 020100DKLNMMMMMMMMUSUL PAYLOAD CC
02 = Gamma update PDU
01 = CLA
00 = P1
DK = Index to 16byte Gamma update 3DES Key.
LN = Length of Message
MM = 8 Byte DES MAC
US = Update Selector (what to update)

For GSMK US = 01
For PMSK US = 02
For IV_PAD US = 03
For GMASK US = 04
For PMASK US = 05
For KEK US = 06
For COCO US = 08
For HSN US = 09
For ExiKey US = 0B
For AxiKey US = 0C
For ProviderID US = 10
For GroupKey US = 12
For ProductKey US = 13
For OS Erase US = 20
FOR OS Update US = 21

UL = Length of Update (for example for HSN UL = 03, for GMSK UL = 10, etc...)

PAYLOAD is the Update
CC = Message CRC or Checksum. Simply XOR message with 0x3F

OK to have multiple updates in one command.
Example:
020100DKLNMMMMMMMM0903HNHNHN0803COCOCO1003PIPIPICC

This command will update HSN (HN), Coco (CO) and Provider ID (PI) in one go.

The DES MAC is calculated by prepending an 8 octet confounder to the plaintext, performing a DES CBC-mode encryption on the result using the key and an initialization vector of zero, taking the last block of the ciphertext, prepending the same confounder and encrypting the pair using DES in cipher-block-chaining (CBC) mode using a a variant of the key, where the variant is computed by eXclusive-ORing the key

The message after LN is encrypted using the Triple DES mode CBC until the CC using 16 byte key in index DK . ''

[me1960]

20.07.2009

Gammacard_Unlocker_v1.0

download :

http://rapidshare.de/files/47899126/..._v1.0.zip.html

[me1960]

How to progamme gamma card with cas int.3plus

'' I always recommend After you download the necessary files needed you unpack them and save them to Desktop this way you know where to find them

You will need both your Usb & serial cable plugged into your Cas Programmer, to successfully programme your Gamma Card using Besttt Loader v2.0/2.1.

1.Start up the CIS 8.6c software, you should have a shortcut icon on your desktop.

2.Click on the Utilities tab, and then PHOENIX icon,

3. Click on Phoenix @ 6.00Mhz

4. Click on Hide

5. Open Besttt Loader V2.0/2.1

6.Now insert your Gamma card chip facing down

7. Click on Load File

8. Navigate to your desktop to where you have saved Latest .bes file
highlight it and click open.

9.Now click Programme Card
and wait for the Card to finish programming.

After it programmed successful click exit and remove your card . ''

[djsavas]

CREATE YOUR OWN GAMFILE-HOW TO

download :

http://rapidshare.de/files/47873339/...ow_to.rar.html

this file is corupt can i find it enywere else???? anybody? PM me thanks

[me1960]

download '' create your own Gamfile-how to '' :

http://rapidshare.de/files/48200858/Create_Your_Own_GamFile-How_to.rar.htm

[djsavas]

i di it my friend the file is not working the pdf is bad can i find it anywere else??

[georgekama]

CREATE YOUR OWN GAMFILE-HOW TO

download :

http://rapidshare.de/files/47873339/...ow_to.rar.html

thankx for sharing, but unfortunately the extracted file has been damaged and can u plz upload again with some other format other than Acrobat?
regards