N Line in spark

[horatyu]

please say what does not?
line local N ===> not open the image you tv channels?
or
N line as a customer in sharing TV channels do not open image

so...I think you do not do something right

Each space must be respected, every comma

[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100




here " host.dyndnds.com " is Your line N

34000 is a port that you have to open it in router ( you open port in your router? )

check you can do here ( take a test if your port here )http://www.whatsmyip.org/port-scanner/
do you check (scanner)if your oscam is on

user and password need to set in oscam.user in new account


[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1

[lme]

The same N-line settings work on e2 but on spark.

[lme]

please say what does not?
line local N ===> not open the image you tv channels?
or
N line as a customer in sharing TV channels do not open image

so...I think you do not do something right

Each space must be respected, every comma

[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100




here " host.dyndnds.com " is Your line N

34000 is a port that you have to open it in router ( you open port in your router? )

check you can do here ( take a test if your port here )http://www.whatsmyip.org/port-scanner/
do you check (scanner)if your oscam is on

user and password need to set in oscam.user in new account


[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1

I do have all these settings in o.server & o.user
What needs to be activated from plugin menu ?
I had tried all combinations and got the same: "scrambled or not running"
Aru you guys running spark 1.2.50 or earlier versions ?

[Tody]

IME!
To activate plugin in spark, do this:
MENU-Plug in--- and here you will see the installed plugins list. You use N line, so you must start mgcamd.sh4.

If you don`t see the plugins there, it`s mean you must to install it first (with a memory stick).
If you need help, please write me.