Nu trebuie sa faci nimic. Doar sa instalezi imaginea potrivita patchiuta.
Thanks: 4
Likes: 0
Dislikes: 0
Nu trebuie sa faci nimic. Doar sa instalezi imaginea potrivita patchiuta.
Esti sigur ca a fost patchuita? Sau a fost imagine originala?Originally Posted by zappa
era o imagine pentru clone.
---------- Post added at 14:48 ---------- Previous post was at 14:45 ----------
in alta ordine de idei, cum se poate copia o imagine de pe un receiver, clona de 800, in cazul nostru ?
un raspuns mai scurt nu puteai da ? in ce format ? care sunt pasii de urmat ?
e vreun tutorial pe tema undeva ?
Last edited by nirolf; 17-02-12 at 20:23.
Eu am folosit TSFlash.Se gaseste in TSPanel,trebuie instalat cel pentru SSL-ul de pe dream,un stick cu swap pe el sa zicem de 128Mb ca sa fie si se poate face backup.
:
dFlash e un plugin. Eu l-am folosit cu succes si a rezultat o imagine nfi care continea absolut tot ce aveam la acel moment.
Asta e din log file:
Mar 29 17:33:30 vusolo daemon.debug CCcam: enigma interface: disconnected (0)
Mar 29 17:33:30 vusolo user.warn kernel: [37860.236000] stop pcr0 on dmx 0 pid:c9
Mar 29 17:33:30 vusolo user.warn kernel: [37860.237000] stop video0 on dmx 0 pid:c9
Mar 29 17:33:30 vusolo user.warn kernel: [37860.239000] VIDEO0: stop decode
Mar 29 17:33:30 vusolo user.warn kernel: [37860.240000] VIDEO0: set blank to 1
Mar 29 17:33:30 vusolo user.warn kernel: [37860.241000] audio: decoder stop
Mar 29 17:33:30 vusolo user.warn kernel: [37860.244000] stop audio on dmx 0 pid:d2
Mar 29 17:33:30 vusolo user.warn kernel: [37860.245000] audio: xpt stop(3)
Mar 29 17:33:30 vusolo user.warn kernel: [37860.245000] no decoder left in sync handling so disable xpt_sync
Mar 29 17:33:30 vusolo user.warn kernel: [37860.246000] bcm_audio_channel_stop(3) done
Mar 29 17:33:30 vusolo user.debug kernel: [37860.417000] unknown fec code: 0
Mar 29 17:33:30 vusolo user.warn kernel: [37860.439000] start pcr0 on dmx 0 pid:13bb index 5
Mar 29 17:33:30 vusolo user.warn kernel: [37860.441000] start audio on dmx 0 pid:13c0
Mar 29 17:33:30 vusolo user.warn kernel: [37860.441000] audio xpt start
Mar 29 17:33:30 vusolo user.warn kernel: [37860.442000] sync is off so we enable it
Mar 29 17:33:30 vusolo user.warn kernel: [37860.442000] demux-index 0 pcr0pid 13bb
Mar 29 17:33:30 vusolo user.warn kernel: [37860.443000] using 5 as pcr0 pidchannel
Mar 29 17:33:30 vusolo user.warn kernel: [37860.443000] MPEG
Mar 29 17:33:30 vusolo user.warn kernel: [37860.444000] audio: decoder start 0
Mar 29 17:33:30 vusolo user.warn kernel: [37860.446000] video delay 0 (0 ms)
Mar 29 17:33:30 vusolo user.warn kernel: [37860.447000] total video delay: 0 (0 ms)
Mar 29 17:33:30 vusolo user.warn kernel: [37860.448000] start video0 on dmx 0 pid:13bb
Mar 29 17:33:30 vusolo user.warn kernel: [37860.449000] total video delay: 0 (0 ms)
Mar 29 17:33:30 vusolo user.warn kernel: [37860.453000] VIDEO0: start decode
Mar 29 17:33:30 vusolo user.warn kernel: [37860.538000] RAP first pts 0x1aa2652fa, stc 0xceef0c52, pcr valid
Mar 29 17:33:30 vusolo user.warn kernel: [37860.538000] printk: 53 messages suppressed.
Mar 29 17:33:30 vusolo user.warn kernel: [37860.539000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.542000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.546000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.551000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.555000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.559000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.563000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.567000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.571000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo user.warn kernel: [37860.575000] audio_cdb_itb_error_isr! underflow
Mar 29 17:33:30 vusolo daemon.debug CCcam: found viaccess caid: 0x500 ecmpid: 0x1fd1 id: 0x50600
Mar 29 17:33:30 vusolo daemon.debug CCcam: found cryptoworks caid: 0xd00 ecmpid: 0x1fa9 id: 0x0
Mar 29 17:33:30 vusolo daemon.debug CCcam: found cryptoworks caid: 0xd02 ecmpid: 0x1ef5 id: 0x0
Mar 29 17:33:30 vusolo daemon.debug CCcam: found cryptoworks caid: 0xd97 ecmpid: 0x1f1d id: 0x0
Mar 29 17:33:30 vusolo daemon.debug CCcam: found nagra caid: 0x1815 ecmpid: 0x1ee1 id: 0x0
Mar 29 17:33:30 vusolo daemon.debug CCcam: found conax caid: 0xb02 ecmpid: 0x1f09 id: 0x0
Mar 29 17:33:30 vusolo daemon.debug CCcam: found irdeto caid: 0x653 ecmpid: 0x1f31 id: 0x0
Mar 29 17:33:30 vusolo daemon.debug CCcam: cam[0] set PMT for sid=1f9
Mar 29 17:33:30 vusolo daemon.debug CCcam: start EMM
Mar 29 17:33:30 vusolo daemon.debug CCcam: EMM demux 1 set
Mar 29 17:33:30 vusolo daemon.debug CCcam: EMM: not interested in 0500:050600
Mar 29 17:33:30 vusolo daemon.debug CCcam: EMM: not interested in 0D00:000000
Am un Sunray SR4.In ultimele zile mi se opreste 3C-ul destul de des.Am probat imagini Newnigma in flash, pe stick Domica, Dreamelite,GP3 si acum si Blackhole 1.7.4.La fiecare se opreste des.Am incercat cu CCcam 2.0.11 si CCcam 2.1.3.Am facut un script pentru a urmari CCcam-ul, am copiat in usr/script am dat attribute 755 dar la BH crond manager nu apare cccheck.sh .Unde gresesc?
PS: uitandu-ma prin telnet imi da eroarea: segmentation fault.
Last edited by zottya; 28-03-13 at 12:40.
activeaza debugul in cccam si vezi unde se opreste... pune in etc/cron/crontabs/root:
ca sa-l ruleze la minut*/1 * * * * /usr/script/cccheck.sh
ai crond pornit?
si eu am problema asta... din cite am vazut cind da o eroare la o conexiune de newcamd, se opreste..
^^^^
bafta
De doua saptamani aceiasi problema am si eu cu blocarea Cccamului, aproape din doua in doua ore.
Posting Permissions
Reply With Quote