-
OSCAM - OpenWrt
De azi dimi neata ma zbat sa compilez, in simplebuild, un oscam pentru un [Only registered and activated users can see links. Click Here To Register...].
Din ceva cauza, nu vrea sa plece nici daca ii dau in cap.
Momentan ma chinui cu aceasta compilare:
Code:
+-------------------------------------------------------------------------------| OSCam ver: 1.20-unstable_svn rev: 10012 target: mips-openwrt-linux-uclibc-libusb
| Tools:
| CROSS = /opt/simplebuild/toolchains/tplink_backfire/bin/mips-openwrt-linux-uclibc-
| CC = /opt/simplebuild/toolchains/tplink_backfire/bin/mips-openwrt-linux-uclibc-gcc
| Settings:
| CONF_DIR = /usr/local/etc
| CC_OPTS = -Os -ggdb -pipe -ffunction-sections -fdata-sections
| CC_WARN = -w
| CFLAGS = -DWITH_LIBUSB=1
| LDFLAGS = -Wl,--gc-sections -DWITH_LIBUSB=1 -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L/opt/simplebuild/toolchains/tplink_backfire/lib
| LIBS = -lusb-1.0 -lrt -lpthread -ldl -lrt
| UseFlags = USE_LIBUSB=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH HAVE_DVBAPI IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK CLOCKFIX WITH_EMU
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE CONSTCW
| Readers : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD
| CardRdrs : PHOENIX SMARGO SMARTREADER
| Compiler : mips-openwrt-linux-uclibc-gcc (GCC) 4.3.3
| Binary : ../archiv/oscam-svn10012-tplink_backfire-webif-libusb-oscam-emu-patched
+-------------------------------------------------------------------------------
Am incercat sa bifez, debifez, rebifez multe, dar nu vrea sa plece nicicum.
Ceva pareri?
-
Vad ca vrei sa-l faci cu patch. L-ai pus pe ultimul? Incearca prima data sa vezi daca reusesti fara emu. Eu am facut pe Debian in VM pt raspi, pt sh4 si pt Asus WL 500 gpv2(Tomato+optware) , toate cu emu si n-am avut probleme.
-
Nu am incercat fara patch. Incerc acum.
Si eu sunt cu VM (ubuntu).
---------- Post added at 19:00 ---------- Previous post was at 17:02 ----------
...fara succes
-
Daca nu te descurci , gata muncit un open-wrt cu toate cele inclusiv watchdog pentru oscam ai pe situl asta:[Only registered and activated users can see links. Click Here To Register...] cu download de aici :[Only registered and activated users can see links. Click Here To Register...].
Eu il folosesc de ceva vreme si raman surprins de stabilitatea pe care o are pe un DIR825 .
Daca te ajuta aici ai oscam compilat :[Only registered and activated users can see links. Click Here To Register...]
Sper sa te ajute si deasemenea sper ca nu am incalcat regulamentu postand link extern.
f11
-
Am facut eu un bin. [Only registered and activated users can see links. Click Here To Register...].
-
f11, mersi de idei/linkuri, le-am epuizat.
Am instalat acele resurse. Nu prea vreau sa instalez imagini neoficiale, mai ales cosmetizate in acest sens.
Am adaugat oscamwrt.mooo.com/..... la lista de pachete din router, am instalat acel oscam, cu acela functioneaza. Dar eu il vreau pe cel compilat de mine.
Relysat, mersi de link, eset smart security blocheaza fileshare, ca fiin nesigur. Ma voi ocupa de el, putin mai tarziu, in cel mai rau caz maine. Cu ce l-ai compilat? simplebuild?
Daca nu voi avea succes, voi ramane la ipk-urile de pe oscamwrt.mooo.com + watchdog.
-
M-am saturat de Buffalo, i-am dat altceva de lucru, si am scos WDR4300 de la naftalina.
Am instalat openwrt, am pus oscamu, watchdog, etc, dar asta nu vede niciun USB in /dev/
Cititorul il recunoaste:
root@tplink:~# lsusb
Bus 1 Device 1: ID 1d6b:0002 Linux 3.10.49 ehci_hcd EHCI Host Controller
Bus 1 Device 2: ID 05e3:0608
Bus 1 Device 4: ID 0403:6001 Reader Serial gefunden (mouse) == AH01B841
root@tplink:~# dmesg | grep usb
[ 4.620000] usbcore: registered new interface driver usbfs
[ 4.630000] usbcore: registered new interface driver hub
[ 4.630000] usbcore: registered new device driver usb
[ 5.070000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 5.510000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[ 1756.610000] usb 1-1.1: USB disconnect, device number 3
[ 1759.660000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
si aici incepe distractia:
root@tplink:~# cat /proc/bus/usb/devices
cat: can't open '/proc/bus/usb/devices': No such file or directory
Idei?
---------- Post added at 15:15 ---------- Previous post was at 14:39 ----------
rezolvat instaland kmod-usb-serial-option.
-
din ce ati testat voi cu ce redear merge mai bine ? cu easymouse2 sau smargo v2 pe cardul focus si tvr?
-
Eu cu al meu Easymouse am timpi de ~200ms pe pocus.
