D*lce si oscam

Decarcati oscam de pe server + config-ul

apoi: var/tubox/config editati fisierele:

-oscam.conf

Code:

---

[global]
nice = -1
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 22000@092f:000000

---

-oscam.server

Code:

---

[reader]
Label = Dolce (39E)
Protocol = Intern
Detect = CD
Device = dev/sci0 #sau dev/tts0 ptr phonix
group = 1
#emmcache = 1,3,2
#mhz = 525
CAID = 092f
BoxID = 123abc
#savenano = all
Customspeed = 0
EMMCache = 1,3,2
Fallback = 0

---

-oscam.user

Code:

---

[account]
user = user
pwd = passwd
group = 1
uniq = 1
caid = 092f
ident = 092f:000000
AU = Dolce (39E)
monlevel = 0

---

Copiati linia N in CCcam.cfg

Code:

---

N: 127.0.0.1 22000 user passwd 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

---

Intrebare: daca dulcele merge bine direct in cccam, atunci de ce mai este nevoie de oscam?

Adevarat dar eu vreau cadul direct si nu in hop1 in cazul meu avand 3 receptoare cu linie n ecm max 200 zic e mult mai rapid decat CCcam

nu am reusit sa pornesc cardul cu aceste setari .. :comp:

daca acum folosesc cccam 2.1.3, si cardul de dolce il citesc cu cccam-ul, dupa ce pun oscam, ce modificari trebuie facute in cccam.cfg?

mai ramane acolo boxkey-ul?

Adaugi linia N. poate sa ramana boxkey in cccam.cfg pt ca oricum reader-ul va fi oscam

uite setarile mele:

in ccam.cfg adaugi N (va fi in hop 0)
---------

Code:

---

N: 127.0.0.1 50000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

---

sau C (va fi in hop1)

Code:

---

C: 127.0.0.1 12001 user pass no

---

oscam.conf
-----------

Code:

---

[global]

Nice = -1
saveinithistory = 1
LogFile = stdout
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
maxlogsize =10
pidfile = /var/run/oscam.pid
ClientTimeout = 5
CacheDelay = 120

[monitor]
Port = 1000
NoCrypt = 192.168.1.1-192.168.1.250
AULow = 120
MonLevel = 2

[webif]
httpport = 8888
httpuser = userwebif
httppwd = passwebif
httprefresh = 10
httpallowed = 1.0.0.1-254.254.254.254

[newcamd]
Key = 0102030405060708091011121314
Port = 50000@092F:0000

[cccam]
port = 12001
reshare = 2
version = 2.1.3
build = 213

---

oscam.server
-------------

Code:

---

[reader]
AU = 1
Enable = 1
label = Dolce (39E)
Label = Slot0
Protocol = internal
detect = cd
device = /dev/sci0
mhz = 500
Fallback = 0
Group = 1
CAID = 092f
ident = 092f:000000
boxid = XXXXXXXX
EMMCache = 1,1,2
pincode = 0000

---

oscam.user
-----------

Code:

---

[account]
User = user
Pwd = pass
monlevel = 1
AU = 1
Uniq = 1
Group = 1

---

OK, am reusit sa pornesc CCCam 2.1.3 si Oscam. problema e: nu imi mai apare cardul la Entitlements, apare doar

Quote:

---

127.0.0.1:50000 |00d 00:02:00|newcamd | | | 1 |remote 092f:000000 6(0)

---

la sectiunea Servers.

se pare ca nu decodeaza.
aseara am mutat antena pe 39*est, si pentru mine (lolcal) decoda (doar cu cccam 2.1.3), in schimb, ecm-uri primite de la clienti nu decoda.

macar stiu acum ca am boxkey-ul bun :)

Ce sa-i fac ca sa decodeze si pt clienti?

le dai linii N sau C dar trebuie sa-i adaugi in oscam.user

ex

oscam.user

Code:

---

[account]
User = user
Pwd = pass
monlevel = 1
AU = 1
Uniq = 1
Group = 1

[account]
User = user2
Pwd = pass2
monlevel = 0
AU = 0
Uniq = 1
Group = 1

---

entitlements iti apare in webif al oscam acum pt ca oscam este reader

deci trebuie sa retrimit linii N la toata lumea? deci la fiecare peer sa am linie F in cccam.cfg si user+pass in oscam.user?


eu tot cred ca nu decodeaza, la servers, la cccam webif apare: remote 092f:000000 95(0)

numai un client se pare ca foloseste cardul acum, dar poate nu am eu pachetul activ pentru canalul la care priveste el. cred, sper :)


nu gasesc fisierul de log. nu e in /var/log

---------- Post added at 13:47 ---------- Previous post was at 13:09 ----------

asta e din log:

Quote:

---

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jun 10 13:31:19 2010
-------------------------------------------------------------------------------
2010/06/10 13:31:19 448 s version=0.99.4svn, build #2330, system=powerpc-tuxbox-linux, nice=-1
2010/06/10 13:31:19 448 s max. clients=29, client max. idle=120 sec
2010/06/10 13:31:19 448 s max. logsize=10 Kb
2010/06/10 13:31:19 448 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2010/06/10 13:31:19 448 s shared memory initialized (size=492830, fd=5)
2010/06/10 13:31:19 448 s anti cascading disabled
2010/06/10 13:31:19 448 s dvbapi disabled

---

imagini: [Only registered and activated users can see links. Click Here To Register...]

Nu ai nevoie sa dai linie N ficcarui per din CCcam (desi atentie mare cu linile N!!)

in oscam.config nu ai drirectionat bine fisierul log
/var/tuxbox/config/ cred ca aici e celmai bine sa il pui

Explicati legate de PM

Gasiti [Only registered and activated users can see links. Click Here To Register...]
Ori ce Linie N creata poate fii multiplicata! asta e atentia controlul il aveti un emulator

In configuratia de mai sus oscam+CCcam se mai face AU la card?

cum overclockez cardul in Oscam? schimb la oscam.server mhz=500 cu ce?
nu merge cardul cum trebuie pentru clienti, adica din 250 de ecm-uri primite, doar 10 sunt rezolvate....si ma gandesc ca poate e frecventa la card prea mica.

Eu il am in cccam trecut la 600 si merge bine, incearca sa pui asa.

Merge bine cu Mhz=657

---------- Post added at 10:26 ---------- Previous post was at 10:17 ----------

[account]
User = user
Pwd = pass
monlevel = 1
AU = 1 acesta face au la userul respectiv
Uniq = 1
Group = 1

[account]
User = user2
Pwd = pass2
monlevel = 0
AU = 0 dezactivat au ptr acest user
Uniq = 1
Group = 1