Azbox hd e2 images

[qwess]

RTi core RC5 Enigma 2
New_kernel: Linux AZBox 2.6.29.4-13-the_ripper #13 PREEMPT Wed Feb 23 14:42:05 CET 2011 mips GNU/Linux

RC5 is RC4 + new kernel which enables install Official FW on USB (with AZUp) and boot automaticly if USB stick with Official FW is in AZBox during booting.

by The_Ripper:
Yes with kernel 2.6.29 I have activated KEXEC support for Sigma 8634 and now it is possible to boot official FW from USB, anyway telesat should unswer that if AzUP can be point on what USB port to install, but booting from USB1/USB2 can be done for official FW.
You can install first on USB1 port and then to attach to USB2 port , heheheheh. this way it will work for shure

New ver. RC5
Changes in kernel - necessarily to write kernel (check 'copy kernel' in azup),
ofcourse it is necessary only one time
What is new :
- NEW Kernel - allowed to use/install E2 on DOM and Official FW (dofferent kernel-old kernel) to USB stick
- NEW structure/file format - now E2 files/kernel use .e2 extension
NEW AZUp v.2.x.x - use only new .e2 extension
- allow to prepare and install official FW on USB stick
- allow to make Backup ch.list, settings and camd setings/scripts/cfgs from installed Enigma2 and Restore to new fresh E2 installation.
-Added additional control before install : check cpu speed and if overclocked - reset to default value
- Checking free ram (min) needed for some operation
- Checking existing/correct mount for storage device - where you want to install E2.
- Auto switch to rescue mode if AZBox is in E2 mode
- Alsoo now you can see info about loaded E2 File
pls read Readme file for more info about AZUp 2

Direct Download RTI:
AZUp 2
Files need for install Official FW on USB
E2 RTi Core RC5

Dual boot:

by MickeySA:
In my Elite, I was running Official Firmware, then I put on my usb pendriver first RC4 patch.bin . I followed normal USB Update from screen, then I got rescue mode, and I remove my USB pen driver. I started AzUP 2.0.0. , I pressed flash E2 ( copy kernel and format extended partition is checked !!! ) , I browse for patch.e2 and all was successfully flashed.

After I booted first time in E2, I press Go ! for Official Firmware Install process, then box rebooted in Rescue mode, I put there USB pendrive, and pressed again Go! below Official Firmware, and pointed to vmlinux and second file used from FW4USB folder. So when it was installed, no problem, AzBox booted in Official firmware, then I turned off STB, removed USB and my STB booted in RC5, again i turned of STB, then I placed in usb port USB pendrive on which i installed Official Firmware, I powered STB and it booted directly in Official firmware.

[crisz]

RTi core RC6 Enigma 2 Image :

Based on completly new Drivers and new Kernel.

This Enigma 2 Image is for DOM Install !!!

USE AzUP 2.1 to Install this Image in Your device
( Download AzUP 2.1 here : http://www.azbox-enigma.eu/upload/AZUp_v.2.0.1.rar )

What is new :

- All drivers are rewriten and placed in Kernel space !!!

- Completly new kernel ( from 2.6.22-19 upgraded to 2.6.29 )

- New DVB-S2 Tuner driver for Elite - Premium - Premium+ and Ultra

- DVB-T and DVB-C for all models comming very soon.

- Twin tuner support for Premium+ comming very soon.

- Completly new Gstreamer build by sattomy ( Support for seeking added and Improved stability and playback )

- New and enhanced Videomode ( A/V Settings ) by telesat ( Added settings for DTS and AC3 )

- Deinterlace ( 1, 2, 3 - 1 and 2 give so far best result on our tests )

- Digital Audio settings ( Inside of A/V Settings )

- MediaCenter Plugin by sattomy

- Fixed problem for HD channels on 23.5 , 13 E, 0.8 and 30 w

- Improved Video quality

- Better STC compensation ( Switching to / from AC3 or DTS fixed )

Small Info :

- Now You are also able to play WMA files , only thing what You have to do is to rename WMA extension to WAV , as Enigma 2 doesnt recognise WMA extension ( However, we will patch soon Enigma 2 to be able to recognise .wma extension ).

Still You can expect some bugs which will be improved after implementation of DVB-T, DVB-C, ISDB-T and Twin Tuner support ( Premium+ )

We would like to ask all of You to make Feedback as much as possible

Download :

RTi core RC6 Enigma 2
New drivers
Added Volume Up/Down + Mute/Unmute

Pls replace old KO modules with new ones, /lib/modules/linux-2.6.29....../extra/

DOWNLOAD NEW DRIVERS : http://azupd.ath.cx/fw/files/E2/10.03.2011.zip

Link: http://www.multiupload.com/PMZQPNX1QC

[marck]

RTi core RC7 Enigma 2

**** THIS VERSION IS JUST FOR ELITE & PREMIUM ****

RC7 core Enigma 2 Image

What is new :

- New Kernel and Drivers

- Support for DVB-T and DVB-C Tuners

- Faster zapping time

- New fixes for Media Center Plugin ( Especially on Audio part )

- Improved stability

- New Bootlogo

- Extras is accessible by Blue button

**** THIS VERSION IS JUST FOR ELITE & PREMIUM ****


http://www.multiupload.com/3J35H68FO4

[qwess]

RTi core RC8 Enigma 2

RC8 - version ok for all models


This Enigma 2 Image is for DOM Install !!!

USE AzUP 2.1 to Install this Image in Your device


- EXPERIMENTAL - TWIN SUPPORT - ofcourse only on P+
- Ultra model now work fine
- STC Prebuffering - only for test , added in A/V Settings
- Scart/RCA - Composite out fixed
- Aspect Ratio and Scalling added in A/V Settings


MultiMedia imrove and fixs :
- fixing packed avi support for gstreamer (finally solved most sync issues)
- been playing 1080p dts through mediacenter from nfs


NOTE : STC Prebuffering is only for test, pls play with this and report on forum what is your experiances , and what is best combination and compromise between fast zap and stable zap


RTi_Core_1.1.8.RC8.rar (46.33 MB)

[istvan]

RTi core RC9 Enigma 2

RC9 - version ok for all models


This Enigma 2 Image is for DOM Install !!!

USE AzUP 2.1 to Install this Image in Your device


- Fixed recording
- Added TS playback
- Added timeshift
- Added audio AC3+ PID detection inside Enigma2 (experimental, need to be tested)
http://www.multiupload.com/KGJWNF3560

[qwess]

O buna avansare cu ultimile 2, DVB-T functional SD/HD, unele pierderi de semnal audio pe HD(DVBT) dar revine cu zap +/-, calitatea video foarte buna pe HD.
DVB S- AC3 =ok
subtitrarea pe History HD 08W, afisata cate o fractiune de secunda!
redarea .ts functionala cu RC9, inregistrarea OK, testat cu 3 in acelasi timp pe acelasi TP, atat sat cat si terestru.
CCcam, newcs, oscam functioneaza bine, readerul intern inca nefunctional, smargo=OK.
pe partea media incepe sa lucreze, mkv 1080P+DTS merge foarte bine, m2ts inca nu..., nu am testat mts(avchd).
skinurile ruleaza bine, picons ok, EPG = ok.
Plugins:
Camd Manager=ok
CCcamInfo=ok
YouTube =netestat
WebInterface=ok
Weather=ok


Insa la mine o problema: la revenirea din sleep in weekup prin hdmi...."no signal" necesita restart GUI.

[istvan]

RTi core RC10 Enigma 2
What is new in RC10 ?


- New Enigma 2 from 29.03.2011

- New Drivers from 29.03.2011

- New Bootlogo

Change log :

- Fixed subtitles

- Fixed Radio mode ( Radio channels should work now )

- Fixed sync on Media player part ( for MKV and other formats )

- Added support for subtitles in VOB files

- Improoved support for AC3+ audio on DVB part

- Added Online Update option ( We will push new updates trough this plugin, follow this thread to know when to update! )

- Added Beyonce 9 skin by Matrix10

[lxzheng]

RTi core RC5 Enigma 2
New_kernel: Linux AZBox 2.6.29.4-13-the_ripper #13 PREEMPT Wed Feb 23 14:42:05 CET 2011 mips GNU/Linux

RC5 is RC4 + new kernel which enables install Official FW on USB (with AZUp) and boot automaticly if USB stick with Official FW is in AZBox during booting.

New ver. RC5
Changes in kernel - necessarily to write kernel (check 'copy kernel' in azup),
ofcourse it is necessary only one time
What is new :
- NEW Kernel - allowed to use/install E2 on DOM and Official FW (dofferent kernel-old kernel) to USB stick
- NEW structure/file format - now E2 files/kernel use .e2 extension
NEW AZUp v.2.x.x - use only new .e2 extension
- allow to prepare and install official FW on USB stick
- allow to make Backup ch.list, settings and camd setings/scripts/cfgs from installed Enigma2 and Restore to new fresh E2 installation.
-Added additional control before install : check cpu speed and if overclocked - reset to default value
- Checking free ram (min) needed for some operation
- Checking existing/correct mount for storage device - where you want to install E2.
- Auto switch to rescue mode if AZBox is in E2 mode
- Alsoo now you can see info about loaded E2 File
pls read Readme file for more info about AZUp 2

Direct Download RTI:
AZUp 2
Files need for install Official FW on USB
E2 RTi Core RC5

Dual boot:

thanks a lot!!! thank you !!
I want this for a long time.

[crisz]

Salut,
O noua imagine RTI din 30.01.2012
RTi Core v1.6.0 Enigma 2
RTi Core v1.6.0 Enigma 2 for AzBox HD Elite, Premium, Premium+ and Ultra

http://www.fileserve.com/file/PgF3Z4p/RTi_Core_1.6.0.rar

[crinughe]

Eu am un Elite cu tunere S+C si le-am incercat pe toate 1.4.0 , 1.5.0 si 1.6.0. Pot spune ca cea mai stabila este 1.4.0 in sensul ca tunerul de cablu merge perfect cu ea.Totusi am revenit la Spaze 2.1 care mi se pare cea mai buna solutie pentru un Elite cu E2.

[qwess]

RTi Core v1.7.0 Enigma 2

Enigma 2 of 28.02.2012

Kernel of Sun Feb 19 22:34:11 CET 2012 mip

Drivers of 17.02.2012

changelog:

- Fixed HDMI , added new way of controling A/V output.

- Added blindscan for Premium+ and Ultra ( Menu -> Setup ->  Service Searching -> Manual Scan -> Type of scan: Move <- or  -> to Blindscan )

- Fixed Teletext

- Fixed lag on Premium+ and Ultra model

- Fixed .mp4 playback with .srt files

- Fixed seg. fault messages on .avi files

- Added support for 3G USB Modems (You can enter own parameters to  establish connection) (Menu-> Setup -> System -> [3G Set])

- Fixed timeshift and recording 

- Fixed playback of recorded files

- Improved playback over network trough NFS, CIFS and UPnP

This image is designed for Elite, Premium, Premium+ and Ultra

Download:


https://rapidshare.com/files/3310683...Core_1.7.0.rar