RSP E2 Sfinx Edition E2 RSPv3.98 TDT VER1749

[dreanew]

@DreaNew
you managed to get it to work 24 Hours... wow !!!
What is your configuration ?, do you use internal cs ?

Yes with my dm7000 and 2 cards

Unfortunately my setup lasted only 3 hours...then the UFS froze (at least no colorfull snow ;-)

yes, me too , I checked my records, and i saw some freezes, but the movie cames back without personal action.

I write in green fonts my config

Following my Incubus config:########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=1 0 to avoid memory trouble
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=3 0 to avoid memory trouble
# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=1 0 to avoid memory trouble
# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/var/keys/incubusCamd.log
# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key
# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/bin/incubusCamd.prio
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=0
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=1 0 to avoid memory trouble
console_logs_broadcast_port=666
# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=1 0 to avoid memory trouble
webif_port=1965

[Prov:000000:CaID:0000]
check_priority=cs,cs,cs check_priority=cs

cs_protocol_order=cccam
#,newcamd,gbox,camd35,camd33,radegast,aroureos
# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0 process_emms_on_cs_mode=1
# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0
# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0
# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0
# Enable (1) or disable (0) seca 3 ecm pid handler
# when is set to On, it will try to use seca 3 ecm pid
# before try seca 2 ecm pid, otherwise seca 2 pid will
# be selected firstly
# 0 - Off
# 1 - On
#
seca3_handler=0
# This is the ChannelID wich will be used as first value
# on irdeto channels. Value "-1" means no preferred channel id will be used
# The value is expressed as decimal. Automatic change will be done.
#chid=-1
#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam,newcamd,gbox,camd35,camd33,radegast,aroureos
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
#seca3_handler=0
#chid=-1
########################### provider configuration ###########################
[Prov:000000:CaID:0000]
check_priority=cs
cs_protocol_order=cccam
process_emms_on_cs_mode=1
process_emm_g=0
process_emm_s=0
process_emm_u=0
seca3_handler=0
#chid=-1
########################### servers configuration ############################
[Servers]
card_server_url=cccam://ufs910:ufs910@192.168.200.3:12000/yes/[EMM]
card_server_url=cccam://ufs910:ufs910@192.168.200.3:12000
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
1833:1702:000000 for my cards , no caid tunnel

And the cccam Dreambox config:


F: ufs910 ufs910