Sifteam Enigma 2 V0.1.0

[otheitis]

Aici e enigma 2 for 900/910!!!
Informatii pt install sunt inaitru la readme file.

-----------------------------------------------------------------------
ENIGMA 2 for ipbox HD/cuberevo/cuberevo-mini SIFTeam:

First boot take a little bit much more than a normal boot, so wait until you can see the bandeau bar (the one with infos on current channel) on the tv screen.
Default settings are for single tuner on HotBird sat. (you can change them in the menu)

WARNING: Do not forget to change your DNS configuration (if you want to use the decoder on the net). The DNS configuration could only be made by editing manually the file "/etc/resolv.conf"

---------
HISTORY:
---------

release 0.1.0(beta):
*********************
This is the first public release, it's released as a beta version, probably it has many and many bugs, but to fix and to discover them I need all your help, so I decided to make it public
This version does not support:
- card reader
- DVB-T, DVB-C, DVB-S tuners
- twin tuner

Enjoy it! Tideglo

-------------------------------------------------------------
ABOUT ENIGMA 2 for ipbox9000/900/910/cuberevo/cuberevo-mini:
-------------------------------------------------------------

This is an adaption of Enigma 2 for the DGStation's High Definition boxes.

I want to thank these people:
Team DuckTales: for helping me on finding really many bugs and to helping me on make Enigma2 like it is now.
zbigzbig20: for default bootlogo
Spaeleus: for Italian translation
SIFTeam: this is my place, with all my friends that i like really to chat with!!!! (I LOVE YOU GUYS)

I want also to thank two special friends:
genge: for be the best betatester of ever!!!!! (really a ball breaker but also a good friend )
PhotosOfGhosts: for helping me on finding, studying and solving bugs

Regards, Tideglo

----------------
HOW TO INSTALL:
----------------

To test this enigma2 image you need a running nfs server and a serial & network
connection to the receiver.

You need uboot 1.3.1 or higher to run e2 (never tested with lower versions)

Do this only if you want to use nfs-server otherwise go to point 3:
1. extract the tgz file on the server and set the directory in /etc/exports
for example:
/root/Desktop/root 192.168.1.0/255.255.255.0(rw,no_root_squash,sync,no_subtree_ch eck)

where 192.168.1.0 is your net base-address and 255.255.255.0 is your netmask

2. restart nfs server

3. connect via serial console with an hyperterminal connection to the receiver (I suggest you to use putty, it's freeware, and configure it to use a 115200 serial connection)

4. turn on the receiver and hit ctr+z in serial console
you should see the following prompt:

cuberevo>

5. customize the following settings to your network environment and type them into the
serial console:

setenv menu_1 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/nfs nfsroot=/root/Desktop/root rw rootpath=/root/Desktop/root ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit";setenv bootcmd "nfs a5ff0000 192.168.1.6:/root/Desktop/root/boot/uImage;bootm a5ff0000";saveenv;boot'

setenv menu_2 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'

setenv menu_3 'setenv ipaddr 192.168.1.6;setenv serverip 192.168.1.1;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'

setenv menu_4 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr:$serverip:$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot'

saveenv

remember to customize where /root/Desktop/root is the directory you added to /etc/exports and ipaddr is the ip of your decoder, serverip is the ip of your nfs-server, gateway is your gateway ip, netmask is the mask of your home-net

6. now you can restart your decoder and press the relative remote controller's button for 5 seconds to start the image you want:

Press Button 1: start your image using nfs-server
Press Button 2: start your image using usb pendrive if you don't have a SATA hdd
Press Button 3: start your image using usb pendrive if you have a SATA hdd
Press Button 4: start your original flash image in the decoder (DGStation's original firmwares and images based on them)

That operation is necessary only the first time you want to change your boot commands. You don't need to press all the time you reboot the decoder a button to select wich image to start, simply do that only if you want to change to e2 nfs from usb, or from original images.

That's all, Tideglo

DOWNLOAD

Ipbox 9000

http://forum.sifteam.eu/downloads.php?do=file&id=3860

Ipbox 900/910
http://forum.sifteam.eu/downloads.php?do=file&id=3859

[otheitis]

Si un link ca sa va merge cu viteza mare.Ca sifteam site e aglomerat!!!!

http://www.upload-drive.com/4065/445...ni_900-910_zip

[istvan]

la pornire


si la oprire



pozele sunt luate de pe un forum maghiar dar arata bestial...

[Snow]

Cu mii de multumiri lui Zildan ( linux man )
Cred ca sunt primele imagini cu engima pe ipbox in rom

















am plecat la munca ne auzim diseara

[otheitis]

de unde ai gasit asta imagina cu 50-60mb? care ai instalat?

[Snow]

60 de mb downloadata direct de la sif


9000: http://forum.sifteam.eu/downloads.php?do=file&id=3860
900/910: http://forum.sifteam.eu/downloads.php?do=file&id=3859

[otheitis]

Pentru ipbox 9000HD

The installation of SifTeam Enigma 2 for AB IPBox 9000HD with HDD on usb flash.
There has to be inserted HDD and USB flash in the receiver!!!
1. Use AB image 8340b
2. Install the enclosed addon.
3. In PC copy the file "usb_config.img", rename it to "usb_update.img" and install it by basic way. After "DONE" restart the receiver.
4. Connect by webinterface and choose "format". Wait until the message "formatted susesfully"
5. Copy "enigma2.tar.gz" by FTP to /mnt/usb/usb0 (when the usb flash memory is formated successfully the folder "lost+found" will appear there).
6. Connect by web interface and choose "unpack" (appr. 2-3 min). When the image is unpacked you can see the folder tree by FTP in /mnt/usb/usb0
7. Standby+OK - switch off the receiver

Before turning on the receiver hold on nr. 3 on the remote control for turning the E2 or E1 on.
After next start last used software will start automatically.

When there is no picture by HDMI on TV restart the receiver, hold on MENU button on the front display of the receiver and change the video output to 1280*720p.

Attention!:
It is just the test version of the software. The installation is possible only in your personal responsibility. After crash of the receiver the warranty does not have to be guarantied.
The software works just with 1 dvb-s2 tuner and EMU and smartcard readers are not supported.

http://www.upload-drive.com/4134/SifTeam_enigma2_zip

[bz2ruebe]

If you want to preview E2 and have no serial cable, this can help you.

Requires: NLB image installed in flash!

Here is a little guide with a very small flashimage, that prepare your uboot for change, to use the "1" and "2" key to switch between DGS and E2 boot.

Note, you need to download E2 image from a different location.
This file is just instructions and a little flashimage for 900/910/9000.

Get it here: http://rs204.rapidshare.com/files/16.../E2_on_HDD.zip

Howto for installing E2 on internal HDD
with NLB image installed
without Serial cable, only requirements are telnet access.


1. flash image that matches your hardware, 900,910 or 9000 img.
this will enable the fw_setenv to work on you nlb installed image.

2. ftp enigma2_cuberevo.tar.gz file to /media folder
3. telnet to box and execute commands below
--------------------------------
cd /media
tar xzf enigma2_cuberevo.tar.gz
cd release
mv * ../
sync
sync
fw_setenv menu_1 'setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500";setenv bootcmd "bootm a0060000";save;boot'
fw_setenv menu_2 'setenv ipaddr 10.1.1.181;setenv gateway 10.1.200;setenv netmask 255.255.255.0;setenv bootide "run bootargside;ide reset;ext2load ide 0:2 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargside "setenv bootargs console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/sda2 rw rootfstype=ext2 init=/bin/devinit ip=$ipaddr::$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootide";save;boot'
---------------------

In the last command you need to update ip adresses to match your network. othewise E2 is not accessable from network.

and you can boot DGS flash(hold down 1 on remote during) or E2 (hold down 2 on remote during)
remember to change ip adresses above.

[cuculeasa]

nu intzeleg pct 1... cum sa :flash" imaginea pt. ip9000 de exemplu ????

[Snow]

adica sa nu incarci pe 900/910 imaginea de pe 9000 si invers. nu va merge

[cuculeasa]

OK, eu am imaginea de la Sifteam... intzeleg urmatoarele :
1. Re-instalez imaginea de la NLB8421(v1.110) pt 9000HD
2. Fisierul E2_onHDD.zip are 3 imagini, una pt. ip9000 - ce fac cu ea ? cum o "flash" iarashi pe USB stick ?
3. Instalez prin FTP fisierul enigma2_cuberevo.tar.gz.zip in directorul indicat...
De la pasul 3 intzeleg, nu stiu la pasul 2 cum sa ma descurc....
Thanks

[Snow]

la pasul 2 spune:
prin ftp copiezi enigma2_cuberevo.tar.gz in /media folder

[cuculeasa]

ai dreptate.... de fapt nu inteleg ce fac la pasul 1 :" flash image that matches your hardware, 900,910 or 9000 img.
this will enable the fw_setenv to work on you nlb installed image"
La care imagine se refera ? la NLB8421 sau la imaginile mici fin fisierul usb_comfig.welcome9000.img ??????????

[Snow]

Hmmm, mai intai instalezi imaginea celor de la nlb apoi "imaginea mica" din link, dupa care urmezi pasii 2.3.....

[otheitis]

Aici o sa gasiti pe Sifteam Enigma 2 v0.1.0