Intrebari incepator IPBOX 910HD

[al_pacino]

Ma lasa sa fac schimbul acum, nu-mi mai da eroare, dar in rest...aceeasi chestie, tot nu merge...

[SuperSonic]

Am ramas in pana de idei, sorry.

[al_pacino]

Multumesc oricum...
Sunt insa sigur ca mai sunt si altii cu idei pe-aici, numai ca le tin ascunse...

[dorinineu]

Sorry a trebuit sa plec aseara,am fost grabit un pic,pt mbox 0.6 trebuie sa schimbi linia B asa

B: { 0 0 0 }

Sau mai bine uite configul meu pe care il folosesc pe ipbox cu imaginile DGS ,functional 100%

//mbox.cfg EXPLANATION and EXAMPLES


A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0


/**************************************************************************************************** ********************/

D: { 2 }

//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//x=7 -> enable STAPI for Kathrein ufs922 -> dont work CSA decoding
//default disabled

/**************************************************************************************************** ********************/

B: { 0 0 0 }

//B: { 1 127.0.0.1 127.0.0.1 } // for local watching over DVB


//B: { x IP_listen IP_send }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//IP_listen -> on what IP to wait for PMT and ECMs
//IP_send -> on what IP to send DCW
//default disabled

/**************************************************************************************************** ********************/



Z: { 11 01 } { 192.168.1.64 8002 }

// Z option -> control sending/writing current informations
// Z: { xy 0z } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// z=0 -> dont write debug text in console window
// z=1 -> write debug text in console windows
// IP port -> destination IP and UDP port where to send informations
// no default

/**************************************************************************************************** ********************/

#C: { 127.0.0.1 7999 }

// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default


/**************************************************************************************************** ********************/

L: { 1 }

// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1

/**************************************************************************************************** ********************/

#G: { /hdd/ }

//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!

/**************************************************************************************************** ********************/

T: { /tmp/ }

// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }

/**************************************************************************************************** ********************/

K: { /var/keys/ }

// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }


/**************************************************************************************************** ********************/


M: { 1 }

// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0

/**************************************************************************************************** ********************/


P: { /tmp/pmt.tmp }


// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2

/**************************************************************************************************** ********************/

W: { 0 }

// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled

/**************************************************************************************************** ********************/

Q: { 300 }

//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.

/**************************************************************************************************** ********************/

F: { 500 }

//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB


/**************************************************************************************************** ********************/

//V: { card_type | device number | clock | inverse_Reset | inverse_CD_Line | detect card over CTS | DM800/8000 | dbox }
#V: { 3 1 3571200 0 0 0 0 0 } // external reader example -> Seca card, com1 port, clock 3.57 Mhz,
#V: { 3 2 3571200 1 0 0 0 0 }
#V: { 3 3 1 0 0 0 0 0 } // dreambox example -> Seca card,sci0 slot,3.33 Mhz


// [card_type]:
// Seca 3
// Irdeto 4
// Conax 5
// Cryptoworks 6
// Viaccess 7
// NDS 8
// Nagravision 9



// [device number]:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
// /dev/scard0 11 //azbox
// /dev/scard1 12 //azbox



//[clocks]
//for COM ports and external card readers in Hz!!!

//for SCI DreamBox slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz

//[Inverse Reset]
// 1 -yes
// 0 -no
//for GPIO
//2-gpio1
//3-gpio2
//4-gpio3
//5-gpio4
//6-gpio5
//7-gpio6
//8-gpio7


//[Inverse CD Line Detection]
//1 - yes
//0 - no

//[Detect card over CTS signal]
//1 - yes
//0 - no

//[DM800/8000 box]
//1 - yes
//0 - no


//[dbox serial/multicam]
//1 - yes
//0 - no

/**************************************************************************************************** ********************/


#J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled

/**************************************************************************************************** ********************/

#S: { COM1 115200 }
//S option -> enable sssp protocol
//S: { x baud }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1
//x= serial device ...
//valids baud -> 115200,57600,38400,19200,9600
/**************************************************************************************************** ********************/

[al_pacino]

Confirm ca mergeeeee!
Totusi imi poate da careva pe PM o linie de test, sa vad daca se inverzeste? Mentionez ca am card local Dolce si mbox 06 build 0010

[al_pacino]

Am facut rost si de cateva linii deja, dar vad ca in versiunea asta mai noua de MCC imi apar si linii portocalii... Ce semnfica asta, mai precis - "LC on diff. box" ?

[dorinineu]

Are cardul in alt receptor aflat in reteaua locala,adica nu are localul in receptorul din care ti-a dat linia.