max si cccam

[fery21]

simplu pui asta in CCcam.cfg

SERVER LISTEN PORT : 12000
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
AU = yes
SMARTCARD CLOCK FREQUENCY: /dev/ttyS3 8000000
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
DISABLE EMM : yes
B: /dev/sci0 00
B: /dev/sci1 00
#PHOENIX READER PATH : /dev/tts/0
BOXKEY: /dev/sci0 XX XX XX
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00
#CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#CAMDATA: /dev/tts/0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
SMARTCARD CLOCK FREQUENCY: /dev/sci0  8000000 
SMARTCARD CLOCK FREQUENCY: /dev/sci1  6000000
TRY ALL CHIDS : /dev/sci0 
SMARTCARD CLOCK FREQUENCY: /dev/tts/0 8000000
#TRY ALL CHIDS : /dev/tts/0
TRY ALL CHIDS : /dev/sci1

[mondo]

Parerea mea ar fi sa nu incarcati CCcam.cfg-ul cu setari care nu au nici o valoare.Pentru max nu trebuiesc setari in plus fata de cele default.Un CCcam.cfg simplu duce la o functionare optima si fara prea multe probleme.Al meu arata cam asa:

SERVER LISTEN PORT : portul tau
WEBINFO LISTEN PORT : 16001
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : username
WEBINFO PASSWORD : pass
DISABLE EMM : yes
EXTRA EMM LEVEL : yes
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
SOFTKEY FILE : /var/keys/SoftCam.Key
CAID PRIO FILE : /var/keys/CCcam.prio
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo

[tod1975]

multumesc de informatii este ok

[mondo]

Depinde care info sunt ok.Ar fi de ajutor si pentru alti useri.

[tod1975]

ambele sunt ok

[mondo]

Poate probeaza cineva si ne spune si noua!

[imeDB]

...
DISABLE EMM : yes
EXTRA EMM LEVEL : yes
...

sa inteleg ca face au prin net?
e adevarat, mie nu imi mai iese de nici un fel in ultima vreme, dar daca asta e o posibilitate as fi dispus sa incerc

[gelu_dh]

Vad acolo AU = yes
La mine nu exista deloc AU sa trec eu in cccam cfg?

[fery21]

AU=auto update , nu face au pe net ,face au in momentil in care tu cardu decodeaza ptr tine deci cand esti pe satelit

[imeDB]

din cite stiu eu, AU=yes este o setare pentru newcamd
chiar daca ar fi valabila si in cazul de fata, cu siguranta nu este documentata in fisierul config unde, mai mult, toate setarile se declara cu ':', nu cu '='

[mario08]

salut , eu practic pana nu am facut intai au cu camd 3,92 + newcs 1.62 au , vedeam max-ul numai de pe net , acum pot vedea cu ccam 2.09 de pe card prg. din pachetul de baza si restul de pe net