dolce pe cccam

[mario08]

Salut,

Astazi am facut un abonament la Dolce si vreau sa trec de pe gbox pe cccam . I-as ramane indatorat celui care ma va ajuta sa fac setarile...

O zi buna si sper intr-un ajutor imediat.

P.S. Putem sa vorbim si pe messenger daca imi lasi in pm id-ul tau

[fery21]

SERVER LISTEN PORT : 12000
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
AU = yes
#SMARTCARD CLOCK FREQUENCY: /dev/ttyS3 8000000
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
DISABLE EMM : yes
B: /dev/sci0 00
B: /dev/sci1 00
BOXKEY: /dev/sc0 boxkey
#PHOENIX READER PATH : /dev/tts/0
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#CAMDATA: /dev/tts/0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
SMARTCARD CLOCK FREQUENCY: /dev/sci0  8000000 
SMARTCARD CLOCK FREQUENCY: /dev/sci1  6000000
TRY ALL CHIDS : /dev/sci0 
SMARTCARD CLOCK FREQUENCY: /dev/tts/0 8000000
#TRY ALL CHIDS : /dev/tts/0
TRY ALL CHIDS : /dev/sci1

la boxkey faci in felul urmator se iau ultilele 10 cifre de pe conserva se pin doar 9 in calclatorul de la pc ex: 182377xxxy
in calculator pui doar 9 adica fara "y" si dai transformare in hexa vei optine 7 litere,cifre la care adaugi in fata un "0"zero

asta ar fi configuratia cccam pe care o descarci dp server din adoons inlocuiesti in CCcam.cfg ceea ce e mai sus in cazul in care folosesti si o interfata phonix stergi "#"

[teqi]

merg si xxx pe cccam pina la urma se poate

[mondo]

Face si reshare ?...ca la mine nu se vede!

[teqi]

face si reshare si fara pincode

[mondo]

Vreo promotie probabil !!!

[dMd]

@teqi
Deci cu un abonament oficial la Dolce poti decoda canalele XXX pe alt receptor decat pe cel de la ei ?? ... pai daca da, da si tu detalii.
@gobi2000
In CCcam.cfg daca nu se stie frecventa de lucru a cardului mai bine nu o setezi, asta pt a nu praji cardul.
SMARTCARD CLOCK FREQUENCY: /dev/sci0 8000000 -- pt un card NDS 800 este cam mare dupa parerea mea, dar fiecare face cum doreste.

[shadowman]

Respecte!
Aici sunt setari ptr cateva cadruri la:"SMARTCARD CLOCK FREQUENCY":
SMARTCARD CLOCK FREQUENCY: /dev/sci0 8200000 (irdeto 0.195 to 0.1370)
SMARTCARD CLOCK FREQUENCY: /dev/sci1 5250000 ( nds ECM 0.210 DOWN TO 0.191

SMARTCARD CLOCK FREQUENCY: /dev/sci0 5300000 ( Sky uk 0.191 DOWN TO 0.172
SMARTCARD CLOCK FREQUENCY: /dev/sci1 5600000 (Digialb conax 0.275 down to 0.178

SMARTCARD CLOCK FREQUENCY: /dev/sci1 8300000 ( BULSAT IREDETO 2 PURPLE 0.215 DOWN TO 0.151

SMARTCARD CLOCK FREQUENCY: /dev/sci1 8420000 ( SHOWTIME IREDETO 2 0.225 DOWN TO 0.141
Sper ca au fost cat de cat de ajutor ptr.voi.
Bafta!

[FizzIK]

SMARTCARD CLOCK FREQUENCY: /dev/sci1 6000000 ( nds ECM 0.210 DOWN TO 0.180)
dar nu vo recomand daca sunteti slabi de inima sau dat reshare la 100.

[popamare]

hai mai fratilor!!!
Faceti si voi public, cum va merge voua pachetul xxx, ca ma ia capu', simt ca innebunesc. Daca nu e public, dati si voi un PM

Va rooooog muuuuult!!!
si frumos

[crizatu]

Lume, am si eu o problema, va rog sa ma ajutati, mie cand calculez codul in hexa imi da 8 caractere, nu 7!

ce ii fac?

Deci seria e asa: 33FDBF032XXXXXXXY

si eu am luat 32XXXXXXX

si in hexa imi da 8 caractere nu 7...

[oasisone]

mai pune si tu un 0 inainte
sau dupa
parca asa am facut si eu si a mers

[resofty]

iti da 7 apoi la hexa adaugi un 0 in fata si e rezolvata treaba.

[dMd]

Pune cele 8 caractere in CCcam.cfg si va merge sigur. Noile serii care incep cu 3xx... la transformarea in hexa iti da 8 caractere.

[crizatu]

Regula 12.

A mers cu toate cele 8, puse 2 cate 2, adica XX XX XX XX.

Multam!