e2 RSP beta 1.1 TDT 600 by ZILDAN

[aldente]

très bon travail!
but how can i mount the usb-disk?
thx

no idea to this question?

[hd56fox]

no idea to this question?

I have a hdd 500 GB with partition :
sda1 fat32
sda2 with label XBA -BA
sda3 with label XSYS2 - enigma2
sda4 with label XSYS3 - for fatload

If i want to see fat32 partition , in telent, do this command :
mount /dev/sda1 /media/hdd
after this with file manager i can see fat32 partition.
maybe this help you.

[zazabraza]

I have a hdd 500 GB with partition :
sda1 fat32
sda2 with label XBA -BA
sda3 with label XSYS2 - enigma2
sda4 with label XSYS3 - for fatload

If i want to see fat32 partition , in telent, do this command :
mount /dev/sda1 /media/hdd
after this with file manager i can see fat32 partition.
maybe this help you.

Thanks alot hd56fox,
Ok that works but can you make the mount stay even after a reboot, for me the mount wont stick when i reboot ?

@Zildan: You maybe can look in to this and imlement it in your next release. From what i read in other forum AAF image see the fat32 without any external commands. But i rather use your image....thanks and keep up the good work.

[hd56fox]

Ok that works but can you make the mount stay even after a reboot, for me the mount wont stick when i reboot ?
.

If you want to stay after reboot you must write a line in ftsab file
This file is in /etc
Line is like this :
/dev/sda1 /hdd/movie auto defaults 0 0
To see the name of device you can write in telent this :
fdisk -l

After this you can record on partion on hardisk.

[zildan]

This version run fine on SATA.
I have on SATA HDD 3 partitions:

fdisk -l

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 62 497983+ 83 Linux
/dev/sda2 63 124 498015 83 Linux
/dev/sda3 125 9729 77152162+ 83 Linux

I installed BA and BA BOOT in the first partition (sda1 ext2), in sda2 (ext2) e2 RSP, and last partition (sda3 ext3)is mounted in /media/hdd/video for recording.

Put in /var/fstab last line like:

/dev/sda3 media/hdd/movie auto defaults 0 0
for automount on boot.


edit bootp.conf

ASSIGNUSBDEVICES=n
MOUNTDIFFERENT=0
BADEVICE=/dev/sda2
BADEVID=0:2
IPADDR=192.168.xxx.xxx
SERVERIP=192.168.xxx.xxx
GATEWAY=192.168.xxx.xxx
BOOTARGS=console=ttyAS0,115200 root=$badevice rw ip=$ipaddr:$serverip:$gateway:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr init=/bin/devinit
BOOTCMD=ide reset;ext2load ide $badevid a5000000 boot/uImage;bootm a5000000

[mario08]

salut zidan si daca am un hdd s-ata mai mare (320gb) si-l impart in 4 partitii , unde :

- 1 partitie (sda1 ext2) unde va fii inst. BA si BA boot
- 2 partitie (sda2 ext2) unde va fii inst. e2 RSP 1.1
- 3 partitie (sda3 ext2) unde va fii inst. e2 AAF xMAS
- 4 partitie (sda4 ext2) unde va fii "magazia" pt. inregistrari

Put in /var/fstab last line like:

/dev/sda4 media/hdd/movie auto defaults 0 0 for automount on boot

aceasta linie banuiesc ca ramane valabila si zi-mi si mie care ar fii "capacitatea maxima" pt. partitionare la hdd de 320gb la primele 3 partitii

in prezent folosesc stick-ul usb de 4gb impartit :

- 1 partitie 560mb
- 2 partitie 555mb
- 3 partitie 550mb
- 4 partitie restul pana la 3,75gb cat vede stick-ul kcc-3.1

multumesc anticipat pt. info

[zildan]

Deci nu exista capacitate maxima din cate stiu, dar minim sa pui 500 mega. Iti recomand sa folosesti ext3 la partitia 4.
Faci format cu comanda:
mkfs.ext3 /dev/sda4 -L "RECORD"

ca sa ai si label RECORD, sa iti mearga si in AAF partitia la inregistrare fara sa fie necesara adaugarea in fstab.
La AAF e un executabil sutomount. In viitoarele versiuni RSP o sa pun si eu un script de automount.

[jeanplatre]

Hello Zildan,
First of all : sorry, i speak only French and English
But i wanted to tell you than i think your image for Katy 910 is really the best one for all : stability, features, look and feel, poly culture (not only German or German and English).

I have if you permit some little ideas of improvements :
* pcmcia support improvement : i think it depend of the mother Enigma2 image
* Mgcamd natif support for Chameleon support...
* Capability to access Radio menu ? may be it ok but i didn't find by another way than http menu
* Mediahighway EPG for several days ? may be it is ok but i don't know how...
* Capability to launch several features from more places... for example, capability to click "menu" in EPG dispaly to automaticaly program tracking.

Thank's again for your work

Jeanplatre

NB : if i can help for anything in the team, please let me know