RELEASE 0.5.2 (Mod by COoLoSER)
=============
- added information about current and total fav groups, it is shown in left upper corner, before group name
- yellow button shows/hides order numer of channel
- added information about current channel order number, it is shown in right bottom corner. Numbering is exactly like in DGS soft.
- PgUp/PgDown works like Left/Right button
- added ability to jump to channel by giving its order number.
How to use.
1. Put channel order number, with digit buttons.
What is input will be shown on the bottom/right with '*' asterisk character as a marker
2. Press 'OK' button to switch to channel or 'Exit' to cancel.
- checking of current channel, to not switch when there is no need for it.
I have wrote a simple ioctl_helper library, which might workaround some dual recording issues with mgcamd on cuberevo/ipbox9000.
This library catches all ioctl calls from mgcamd and tries to remap some of them to the right slot of stapi.
But keep in mind, that this will probably not solve all issues, as it is impossible to fix everything from outside...
It might be great, if some of you could do also some test, as i have only one scrambled transponder on my DVB-C network i am very limited in testing, but the following things have worked for me:
1. Scheduled recordings have worked even when i have not switched off the box on this transponder, so if this would work for other peoples also this might be quite helpfull.
2. pip sometimes work it depends if this transponder is already allocated to another pti
I did not have the possibility to try if it works when two pti would use the same smartcard through newcs.
You can test the library as follow:
1. copy the attached library ioctl_helper.so to /var/lib
2. find your startscript for mgcamd
2. add the following lines before the line which starts mgcamd:
export LD_LIBRARY_PATH=/var/lib
export LD_PRELOAD=ioctl_helper.so
I have released version 0.0.2 from bitrate-plugin on sourceforge.
This is only a bugfix release for the upcoming software release, as they have changed the /tmp/ptix.tmp files.
Version 0.0.1 will crash with the new firmware release (which will probably be released very soon), so everyone who is using a dgstation based image should upgrade to 0.0.2.
ABCOM will include 0.0.2 version into the standard image, so when you are using a ABCOM based image (ABCOM/CLI) you don't need to do anything.
The plugin can be downloaded from sourceforge site here
To respect the policies from sourceforge, this tar.gz does also include the full source code.
RELEASE 0.7
===========
- all mods from coOLOser included!!
- added basic skin support
- increased timeout when leaving with ok button
- reordered icons in legend, increased font size
RELELASE 1.0.0===========- fixed bug which caused start/stop recording hanged up osd for a while- new configuration option 'show_format_icon' which is used to show or hide channel format icon. Icons are 'mp2' or 'mp4'- separation of RADIO and TV channels. What is shown depends on current TV/RADIO mode- new configuration option 'hide_empty_groups' which is used to show or hide empty groups- parental control -> hide channels settings is respected by plugin. If it is enabled then hidden channels are hide all the time and cannot be show. If it is disabled then FILE key controls showing and hiding of that channels
This add-on allows you to watch the tv stream from the Cuberevo over an web interface.
INSTALL:
Copy var/bin form the archive to /var/bin on the box.
Copy /var/www from the archive to the webif folder on your box (for example /var/www).
Make sure all script files and binarys are executable! (/var/bin, cgi-bin)
USAGE:
Surf to
Code: http://boxip/webtv/
It's tested on Firefox and Internet Explorer 7.
Javascript is required.
Above the video frame you have the basic controls to switch the channels.
The addon loads all channels in your favourites list.
REQUIREMENTS:
- At least firmware R8264 is required!
CAN HD CHANNELS BE STREAMED?
Streaming works for 720p channels, but for 1080i there is not enough network bandwidth.
Those are my test results, also try it for yourselfs.
KNOWN PROBLEMS:
- VLC 0.9 for Windows has a bug in the plugin, its not working. If you have problems, try vlc 0.8.6i
- Radio programs cannot be streamed at the moment.
LICENSE:
All files are under the GPL.
CREDITS:
The server side code for the streaming is based on the streamts app.
RELEASE 0.2:
------------------
- Stream is read directly from hardware, instead of timeshift files (thanks to soon and kneubi from denktenk)
- Video stream does not stop after channel switching. It's now also convenient to open the stream directly in vlc without the webinterface.
(This feature does not work in mplayer.)
- The stream starts playing directly after opening the webif
NEW RELEASE 0.2.1:
------------------
- 720p channels should play fine now
- renamed some files to avoid collissions with DGS webif
Thanks: 
Likes: 
Dislikes: 
New Favourites channellist panel 0.5.2
Reply With Quote
