IPBOX 9000 **NLB firmware**

[Snow]

nlb8421 (v1.110)

Prepared by : Dexter
Release date : November 9. 2008
Changes:
* fixed: DGS application patch to keep EPG when changing TP, DGS delete them.
* fixed: card reader enabled from boot again.
* updated: NL language files (Gman2006)
* updated: USB scripts updates
* update: nlb panel v1.36 emu changing works now.
* - option to set changable delay during boot with newcs
* - Some cards requires longer initialisation than others.
* - Those without should just use like 3 seconds.
* updated: Webepg v0.6 now works with patched DGS application
* - option to dump favorites as webepg.list

http://rapidshare.com/files/16208969...421-v1.110.zip

[Snow]

*nlb8611-v1.21 for CubeRevo/IP9000

Prepared by : Dexter
Release date : December 10. 2008
Changes:
* added: NFS mount replacement for HDD SD media recording folder*
* --------: - can be enabled disabled under IP9000 -> change NFS/HDD media in webif.*
* - Thanks to DGS for assistance on kernel fix.*
* - HD Recordings works too, but will studder! so you are warned.*
* fix: NFS mount on boxes without internal hdd.*
* fix: Slow NFS mount fix (thanks to semack for the help).*
* added: - delay option in panel for Nagra3 cards.*
* added: - Germans with nagra card should use 20 seconds and it decodes at bootup*
* added: ushare for sharing through UPnP protocol (like to PS3) Thanks to Kneubi*
* -----: enable/disable/restart in Webif->system options*
* added: Option to run boot scripts from /var/etc in hotfix situation.*
* plugins: bitrate 0.0.2 and favpip 0.7 .*
* updated: newcs.xml added boxkey code to support German NDS cards.*
* updated: NL language files (Gman2006)*


Here: http://rapidshare.com/files/172118372/nlb8611-v1.21.zip

WEBIF*
login: root*
password: relook
First time boot with Remote still not working, not fixed yet.. sorry!
Reboot at language screen and all is okay.

[otheitis]

CubeRevo nlb8611 to nlb8630-v1.21 quick upgrade
WEBIF
login: root
password: relook

-------------------------------------------------------------------
This ONLY WORKS ON NLB8611 firmware..and takes/requires 2MB in /var
-------------------------------------------------------------------

copy binary "sbox_update" included into your /var/etc
with ftp.... in your favorite ftp application (ie. totalcmd) type
chmod 755 sbox_update

and reboot box and you are upto 8630 edition

http://rapidshare.com/files/173989123/nlb8630update.zip

[otheitis]

CubeRevo/IP9 Series nlb8728-v1.23
WEBIF
login: root
password: relook

First time boot with freeze/panic, is not fixed yet.. sorry!
Reboot at lang screen and all is okay.

Prepared by : Dexter
Release date : December 26. 2008
Changes:
* update: - SVN8728 from DGStation.
* SVN - Support *.mkv with video player.
* - If file needs higher class CODEC, file will not be played with video player . In case of too higher bitrate file, it possible to make a problem for playback (especially *.vob and *.mkv.).
* - Fixed crashing problem with higher symbol rate as 30,000(S/R) TP.
* - Upper card reader.
* - Fixed some bug for schedule recording.
* - Fixed record subtitle.
* - Added "post-descrambling with CAM" function on system settings menu.
* - Added HUB function for USB host
* - Support adjust LipSync using page up/down buttons in Videoplayer
* - Support displays elapsing time on banner of MP3 player.
* - Support Sort function on TMP folder in Recorded files menu.
* - Support auto adjustment local time during boot up if the time variation is less than 10 minutes.
* - Updated language table for Slovak, Bulgarian, Polish and Russian
* - Fixed DVB EPG bug for HB13 10891
* - Fixed elapsing time error when schedule recording.
* - Added ITV HD audio or video type options as AC3, H.264, MPEG 2 etc in Advanced Search menu
* - Fixed bugs in scanning and zapping of the channels with diseqc and usals.
* - Added WSS function through SCART.
* added - dual recording support with mgcamd, default configs are made for newcs setup.
* added - nlbpanel 1.38: nlb panel only shows skins available.
* added - webepg 0.61: Auto import at boot, of epg data when /var/file.xml.imported exists.
* changes - ushare binary updated to use Kneubi release.

http://rapidshare.com/files/177052220/nlb8728.zip

[Snow]

NLB8833BETA fur IP9000/CubeRevo

CubeRevo nlb svn8833 v1.27

---------------------------
for 9000

WEBIF*
login: root*
password: relook

First time boot with Remote not working, is not fixed yet.. sorry!
Reboot at lang screen and all is okay.

Prepared by : Dexter
Release date : January 18. 2009
Changes:
* updated - SVN8833 unofficial (BETA) from DGStation.*
* Fix - PANIC situation when DGS Webif is open on pc during bootup.*
* Changed - HDD Format of ext2 formatted usb/harddrive even if it was ok.*
* Updated - multiboot had some issue with usb sticks above 2GB.*
* Updated - multiboot install now works on boxes where usb is mounted as harddrive.*
* Fix - multiboot webif on port 81 was using old webif directory.*
* Changed - ECM info in webif now showing correct info again.*
* Added - newcs 1.63 with updated configs (added 357 mhz to all configs).*
* plugins - Added shoutcast 0.51, bitrate 0.4, favpip 1.9.4, fps 0.1.3*
* skins - deepblue update 3.5 (new livebanner) Thanks to @Crash*
* SVN --- - Recording problem with short HD recordings and 2hr stop fixed.*
* - simple livebanner (OSD option) still causing crash.*
* - DVBSubtitles now pure white with no banner behind.*
* - Signal strength bar is now working again.*
* - Media player got FastForward/rewind on divx support now (not .VOB files).*
* - blind scan - now default/advanced/reset scan.*
* - photoalbum now has background.*
* - Maturity rating now as agerating number in livebanner.*
* - recording with 1tuner boxes, only channels on same transponder shows*
in channel list when 1st recording is active.*
* NOTE----- this is a BETA, and people with external usb harddrive*
can experience recording issues with 2 HD Channel recordings*
(Will be seen as STUDDERING and only a reboot solves it).


http://rapidshare.com/files/185237516/nlb8833.zip

[PETER36]

NLB8873 for IP9000/CubeRevo WEBIF
login: root
password: relook

First time boot with Remote not working, is not fixed yet.. sorry!
Reboot at lang screen and all is okay.

Prepared by : Dexter
Release date : January 22. 2009
Changes:
* updated - SVN8873 official from DGStation.
* Added - newcs 1.65 with updated configs (added 357 mhz to all configs).
* Added - nlbpanel 1.41 - now option to install pack.tar.gz from /tmp in panel.
* plugins - updated bitrate 0.0.5, favpip 0.9.5
* skins - deepblue update 3.5 (new livebanner) Thanks to @Crash
* Fix - PANIC situation when DGS Webif is open on pc during bootup.
* Changed - HDD Format of ext2 formatted usb/harddrive even if it was ok.
* Updated - multiboot had some issue with usb sticks above 2GB.
* Updated - multiboot install now works on boxes where usb is mounted as harddrive.
* Fix - multiboot webif on port 81 was using old webif directory.
* Changed - ECM info in webif now showing correct info again.
* SVN --- - Recording problem with short HD recordings and 2hr stop fixed.
* - DVBSubtitles color fix.
* - Media player got FastForward/rewind on divx support now (not .VOB files).
* - EPG Contents display changes
* - blind scan - now default/advanced/reset scan.
* - OSD Teletext - some data not update occassionally.
* - Fixed local time auto update
* - updated Polish language table
* - WebIf updated

wolf1976 skin
- To install Wolf1976 skin
Ftp to /tmp and use NLBPanel "Install pack.tar.gz from /tmp" to install skin
you can now choose wolfskin in panel. descarga

[otheitis]

DGStation/Abcom CubeRevo Series NLB svn9047(binaries) v1.29
---------------------------
WEBIF
login: root
password: relook

FIRST TIME BOOTSCREEN PANIC IS FINALLY FIXED!

Prepared by : Dexter
Release date : March 7. 2009
Changes:
* updated - SVN9047+ sbox+skin binaries +po files only.
* plugins - updated favpip 2.1.0
* plugins - updated hddtemp 0.0.7
* plugins - all default in /var/plug-in again.
* emu - mbox 0.4 beta 0023
* webif - emu and newcs selection made simpler.
* skins - deepblue and grey updated.
* emu - EVOCAMD is no longer included in NLB image, no support for it.
* cardreader- DGS Release had problems with Nagra3 cards. this one works.
* DGS webif - updated Geckow webif to 1.3.1 (07.03.2009)


http://rapidshare.com/files/206451427/nlb9047.zip

http://www.upload-drive.com/9320/nlb9047_zip