Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 6 12345 ... LastLast
Results 1 to 15 of 82

Thread: Enigma 2 pe Kathrein UFS-910

  1. #1
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default Enigma 2 pe Kathrein UFS-910

    Duck Tales Enigma2 for Kathrein UFS910 OLD VERSION !!!!!!!!!!


    team DuckTales proudly presents the first enigma2 alpha image for Kathrein UFS-910.
    This image should be seen as a proof of concept - there are many bugs and some hardware
    which is not supported at the moment. If you are a developer, and you have experience in
    (embedded)hardware/linux-dvb-api coding feel free to contact us - you're welcome!

    To test this enigma2 image you need a running nfs server and a serial & network
    connection to the receiver.

    1. extract the tgz file on the server and set the directory in /etc/exports
    for example:
    /nfs/target_enigma2 192.168.0.0/24(rw,no_root_squash,sync,no_subtree_check)

    2. restart nfs server

    3. connect via serial console to the receiver

    4. turn on the receiver and hit enter in serial console
    you should see the following prompt:

    Hit any *** to stop autoboot: 0
    STB7100-REF>

    5. customize the follwoing settings to your network environment and type them into the
    serial console (without the doublequotes):

    "set ipaddr '192.168.0.25'"
    "set serverip '192.168.0.1'"
    "set gateway '192.168.0.1'"

    7. to set the bootargs also type:

    "set bootargs 'console=ttyAS0,115200 root=/dev/nfs nfsroot=/nfs/target_enigma2 rw ip={$ipaddr}:{$serverip}:{$gateway}:255.255.255.0:kathrein:eth0ff mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:${ethaddr}'"
    "setenv bootcmd 'nfs a5000000 {$serverip}:/nfs/target_enigma2/boot/uImage;bootm a5000000'"

    where /nfs/target_enigma2 is the directory you added to /etc/exports

    8. to save the settings type "saveenv"

    9. simply type "boot" or restart the receiver with the power-switch. now enigma2 should boot.


    greetings from team DuckTales
    ONLY devs can contact us at team_ducktales@hushmail.com


    http://rapidshare.com/files/122301748/e2_ufs910-poc.zip


    Porneste de pe NFS.
    Nu merge decat cu FTA.
    Nu scaneaza.
    Are iesirea video in format 570i si unele televizoare cu HDMI sau DVI nu o suporta.
    Merge insa pe SCART pe orice TV.
    Se misca natural.


    Voi continua cu un tutorial.
    Last edited by zildan; 17-11-08 at 02:11.

  2. #2
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default Enima2_UFS910_ST_210608

    O versiune modificata de pe AAF
    -- Setări
    -- Fus orar
    -- Merlin Racer Skin
    -- Proftpd
    -- Afisare timp in VFD
    -- Plug-in pentru fin-tuning imagine

    Daca nu va porneste imaginea pe DVI testati pe SCART.
    La unele televizoare sunt probleme cu rezolutia 570i pe DVI.



    Imaginea e de test. Nu se adreseaza celor care nu au cunostinte avansate de linux.
    Last edited by zildan; 31-10-08 at 08:44. Reason: Nu mai exista lynk-ul.

  3. #3
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default Cateva ecrane de pe enigma 2 pe UFS-910







  4. #4
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default Si HD



    Last edited by zildan; 22-06-08 at 10:34.

  5. #5
    Standard RSP member Alextm's Avatar
    Join Date
    20 Dec 2007
    Location
    Timisoara
    Posts
    39
    Mentioned
    0 Post(s)
    Rep Power
    0

    Default Re: Enigma 2 pe Kathrein UFS-910

    Asta inseamna ca in o luna - doua o sa merga si pe kathy gbox si ccam....viitorul sun bine
    Poate si pe IPbox9000 si atunci o sa sune si mai bine !!

  6. #6
    Standard RSP member otheitis's Avatar
    Join Date
    02 Feb 2007
    Location
    Somewhere in Aegean Sea!!
    Posts
    2,925
    Mentioned
    0 Post(s)
    Rep Power
    82

    Default Re: Enigma 2 pe Kathrein UFS-910

    Nu pot sa cred ca o firma ca ipbox scoate doi modele HD 900,9000 si o sa lasa fara suport la firmware!!Eu din ce am inteles si din ce am vorbit cu sifteam deja lucreaza pt enigma 2 pt ipbox.

    AB IPBOX 9000HD

    DVB/S2-CABLE TUNER

  7. #7
    Golden Member istvan's Avatar
    Join Date
    14 Feb 2007
    Location
    Baia Mare
    Posts
    396
    Mentioned
    2 Post(s)
    Rep Power
    65

    Default Re: Enigma 2 pe Kathrein UFS-910

    se poate descarca vers BA pentru pornirea Enigma2. Este nevoie de NFS server de linux, How-To 11, despre setarile fisierului bootp.conf.
    http://www.aaf-board.com/wbb2/thread.php?threadid=11128
    RSP-TEAM

  8. #8
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default AAF All In One Paket 2.0

    AAF All In One Paket 2.0 + AAF 2.0e-all Version Flash OLD VERSION !!!


    Download


    -----------------------------------------------------------


    1. Inhalt des All In One Pakets

    1.1 Barry Allen Version 5.3.6 und BA Boot 0.6
    1.2 KCC (Kathi Control Center) 2.1
    1.3 AAF Kathrein Image 2.0e fur 2. Bootloader
    1.4 TDT Enigma2 rev254 AAF Mod 2.0
    1.5 HP_USB_Boot_Utility
    1.6 Mini AAF Enigma2 All In One 2.0


    1.1 Barry Allen Version 5.3.6 und BA Boot 0.6

    Barry Allen das Multibootwunder kann nun mit Hilfe von der U-Boot 1.3.1 Version (die ebenfalls vom Team
    Ducktales kommt) komplette Images samt Kernel (wie z.B. Enigma2) von USB oder NFS booten.


    1.2 KCC (Kathi Control Center) 2.1

    VisMans Schweizer Taschenmesser fur die Kathi kann nun auch BA Images und Images in Partitionen
    sichern. Außerdem sieht man nun sehr ubersichtlich das aktuelle Startimage fett und bei Images in
    Partitionen die jeweilige Partition dahinter.


    1.3 AAF Kathrein Image 2.0e fur 2. Bootloader

    Das AAF 2.0e Image wurde nun um eine zuverlässige Boxtype-Erkennung erweitert sodass keine 2
    verschiedenen Versionen mehr notig sind. Auch hier geht der Dank ans Ducktales Team, das uns die
    Sourcen fur die Boxtype-Erkennung bereitgestellt hat. Desweiteren wurde mbox support hinzugefugt und
    das Start Timing angepasst.


    1.4 TDT Enigma2 rev254 AAF Mod 2.0

    Das Team Ducktales Enigma2 Image rev254 vom 03.10.2008 wurde vom AAF Team mit folgenden
    Funktionen erweitertert:

    -Neues AAF Menu mit Addon Manger (erreichbar uber blaue Taste)
    -Automatisches Swap File jetzt mit einstellbarer Große
    -Neue Busybox 1.11.2 eingebaut
    -USB Auto-Mount verbessert
    -USB device mit Verzeichnis movie wir nach /hdd verlinkt
    -Sleeptimer
    -Unterstutzung von ipkg Plugins uber Pluginbrowser und manuelle Installation
    -Formatumschaltung bei 4:3 Sendungen uber Blaue Taste + Grune Taste
    -Die wichtigsten Menus sind nun auch im AAF Menu verlinkt
    -Filesystemcheck beim starten
    -Zeitsynchronisation beim Start
    -Automatisches hinzufugen des Gateways als Nameserver
    -Backupfunktion des Komplettimages in ca. 30s
    -AAF Dark Glass Skin
    -AAF Team Skin

    Die wichtigsten Änderungen vom Ducktales Team seit rev210:

    -tuxtext (Videotext)
    -HDMI Auto Erkennung (nur Auflosungen die auch Unterstutzt werden wegen Samsung 576i Bug)
    -Echtzeit SD Formatumschaltung (4:3 / 16:9 / Pan & Scan)
    -verbesserte Streamtypeerkennung m2ts/trp/vob
    -AC3 / AAC / DTS Unterstutzung in TS Files
    -Fixes zur Systemstabilität
    -Blackscreen Bug Fixed
    -Playlist kann nun komplett geloscht werden
    -Vorspulen in Mediaplayer integriert
    -Play -wieder Normalgeschwindigkeit
    -Play verusacht keinen Neustart des Films mehr
    -Film Icons fur .vob, .m2ts und .mp4

    Viel Spaß!
    Wunscht euch das gesamte AAF Team

    -----------------

    KCC Version 2.1 von VisMan

    alle Änderungen zur Vorversion

    - BA Funktionen jetzt uber Kontextmenu, da besser erweiterbar und kein Platz mehr fur so viele Buttons...
    + Device (und Device Id) bei Partitionsimages in der Liste
    + Image kopieren (BA und Partition)
    + Image sichern (BA und Partition)
    + Image das als nächstes gestartet wird in Fettschrift anzeigen
    - "Reboot Receiver" fixed

    Allgemein:
    - HowTo aktualisiert (Danke an Janojano)
    - Installation FTP Server (proftpd) in Originalimage
    - Bootloaderkonfiguration (Null-Modem Kabel) mit Funktionen zum einfachen setzen der Konfiguration
    - Serielle Bootloaderkonfig.: Funktion zum Booten des Receivers (boot)

    Barry Allen:
    - BA 5.3.6
    - BA Installation uber Netzwerk jetzt auch ohne FTP Server moglich
    - BA Installation: Optionales aufteilen des USB-Sticks in mehrere (4) Partitionen
    - Autom. aktivieren des Swap während Imageinstallation (stabilere Imageinstallationen)
    + Image Installation in Partition (Enigma 2)
    + Aktivieren/Deaktivieren des 2. Bootloaders (wenn installiert)

    Experten: (die Bezeichnung ist ernst gemeint)
    + Device partitionieren / Filesystem erstellen / Label ändern


    BA:

    5.3.5
    - /config/bainit 11 bzw /config/baint mount vom Flash aus wieder moglich.

    5.3.6
    - /config/bainit 11 bzw /config/baint mount funktioniert auch wieder vom BA Image

    - BA 5.3.6
    - Zugriff auf BA Stick aus dem Standby wieder moglich
    - Timeouts erhoht
    - Partition Installation: Imageauswahl: Pfad wird jetzt verwendet
    - Partition Installation: .tgz Archive akzeptieren
    - Partition Installation: Option zum loschen der Partition vor Installation

    Barry Allen mit der Funktion "BA updaten..." auf den neuesten Stand bringen (wenn bereits installiert).
    Die Installation von BA muss im laufenden Betrieb (nicht im Standby) erfolgen.
    Die Installation von Images, etc. sollte im Standby gemacht werden!

    Systemvoraussetzung: Microsoft .NET Framework 2.0

    ----------------------

    BA Tool 5.3.6 neu von GOst4711

    alle Änderungen zur Vorversion

    - Partionierung mit: ./ba.sh install ext2 part oder ./ba.sh install ext3 part (es werden automatisch 4 Partitionen angelegt)
    - wenn ext2/ext3 Partition mit Label XBA vorhanden erfolgt kein formatieren
    - wenn unter /ba/ba/<Imagename> datei bootp.conf vorhanden, wird mit den Parametern aus dieser Datei von einer Partition gebootet. Zum Beispiel E2
    - /config/bainit 99 installation von BA in den bootparms
    - /config/bainit 91 BA aus den bootparms entfernen
    - /config/bainit 92 Bootparameter anzeigen
    - neuer Parameter in bootp.conf. ASSIGNUSBDEVICES=y. Dadurch wird das bootdevice dynamisch angepasst.

    Folgende Parameter konnen von BA verarbeitet werden.
    Aufruf mit /config/bainit <parameter>

    umount ---> BA Device entladen
    mount ---> BA Device mounten
    ftp ---> ftp starten
    e2label ---> ex2/ext3 Partition labeln
    swap ---> Swapfile erstellen
    swapon ---> Swap einschalten
    swapoff ---> Swap ausschalten
    setdefault ---> BA Einträge aus den Bootparametern entfernen
    printenv ---> Bootparameter anzeigen
    setenv ---> BA in den Bootparametern eintragen

    -----------------

    Unser Team mochte sich noch bei all den anderen Entwicklern bedanken,
    die hier ebenfalls im Zusammenarbeit mit denn TDT und uns es so weit gebracht haben,
    dass wir dieses ALL In One Paket 2 heute veroffentlichen konnten.

    Hier waren hellmaster1024, 4@@@@, pinky1981, benutzername, obiwatn76, max10 und ewgene (AAF e2 Skins) daran beteiligt,
    sicher auch noch viele andere in den anderen Boards,
    die ihren Teil dazu bei getragen haben,
    mit den vielen Betatestern zusammen, um dieses Vorhaben zu ermoglichen.
    Last edited by zildan; 17-11-08 at 02:30.
    Sh40, AML, prime focus 1,5m si altele ...

  9. #9
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default Swap

    Atentie mare la aceasta ultima versiune de e2 nu e activat swap-ul cand instalezi imaginea si in consecinta crapa prin umplerea memoriei.
    Au facut in meniuri activarea swap.
    Se face in 2 pasi.
    1. albastru > Swap File si alegeti o dimensiune
    2 albastru > Addon Manager > Swapfile installiern - activieren

    Daca totul merge bine nu o sa mai aveti probleme.
    Eu acum am acrivat 128 mega swap de proba sa vad daca merge, am partitia de 2 giga asa ca nu sunt probleme de spatiu.

    Spor la treaba!
    Sh40, AML, prime focus 1,5m si altele ...

  10. #10
    Golden Member wambertos's Avatar
    Join Date
    27 Jul 2007
    Posts
    379
    Mentioned
    0 Post(s)
    Rep Power
    63

    Default Re: Enigma 2 pe Kathrein UFS-910

    A aparut Enigma E2-317 pentru Flash, doar pt. cei versati care sint in stare sa-si reanimeze receiverele in caz de crash.
    Functioneaza stabil pe vers. 1W + HDMI 720P

    DAS IMAGE LAEUFT STABIL AUF EINER 1W KATHI AN HDMI MIT 720P. HIER TRETEN KEINE PROBLEME AUF.
    BEI ANDEREN KONIFGURATIONEN KANN ES ZU PROBLEMEN FUEHREN, WELCHE ABER MIT MEHRFACHEM BOOTEN GELOEST WERDEN KANN. MEHRFACH KANN BIS 20 SEIN!!

  11. #11
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default e2-kf-317 pe Kathrein UFS-910

    Au aparut aseara cele 2 versiuni de flash si USB, scoase de o echipa de care nu am mai auzit pana acum. Se bazeaza tot pe imagine TDT.
    E o imagine scoasa la repezeala.
    Merge Mbox perfect pe ea.
    Si ca sa aveti ce face:
    Versiunea USB care merge ca si partitie in stickul facut cu KCC.
    Versiunea de FLASH.
    Inca sunt mari probleme cu erorile de scriere pe stick.
    Va astept cu primele impresii.

    Translation: German » English

    -----------------------------------------------

    Content:

    - Warning
    - README.tdt
    - HOWTO-E2-Flash
    - HOWTO-E2-USB
    - Notfallscenario thread

    Quote:

    WARNING!
    ========
    The Flash image is to be regarded as a beta. It is only for experienced hobbyist to recommend.
    So if you are not from the E2, or stick with our description running brings, is strongly recommended to the fingers to inform.
    Next - who no console port with putty and not with telnet know which finger should leave.
    Before we approach the flashing dares to be the emergency scenario exactly studied and understood. Lieber in a thread ask before you loslegt.

    THE IMAGE IS STABLE AT A 1W Kathi WITH AN HDMI 720P. HERE If there are no problems.
    FOR ANOTHER KONIFGURATIONEN CAN cause problems, BUT WITH WHAT MANY BOATS can be resolved. SEVERAL TO 20 MAY BE!

    THE KF_TEAM ASSUMES NO RESPONSIBILITY FOR faulty equipment:
    THE GUARANTEE MAY LOSE GO!

    Those who still turn up here is to understand something of the matter is his or Kathi sorry.
    In both cases, we wish much fun with the Flash version of E2-317

    The KF-team 19th October 2008




    Notfallscenario
    Quote:

    FLASH RECOVERY E2 to ORGIMG
    ====================

    If the box is full zerschossen, except since uboot still is.

    I did it with the flavor of good altbewerten made ufs910config1.1 tools.

    So that it can everybody.

    What do I do if only the uboot is loaded

    1st ufs910config1.1 loader
    2nd Unpacking
    3rd setup_ufs910config.exe dan install and start the installed tool
    3rd com recruit
    4th Setting ips
    5th check
    6th functions -> restoring Notfallimg
    7th Simply follow the instructions.

    Additional Information

    emergency.ub is included in the packet
    their needs can stick
    precaution, the stick is automatically formatted
    you need information flashimg z.b KF-106 or AAF 2.0e
    you need only give the bootargs manually adjust.





    Release Notes:
    Quote:

    *********************************************
    A big thanks to the tireless work of the TDT!
    Without them this would never have been possible.
    *********************************************

    Changes since (Sat, 11 Oct 2008)
    ================================
    319 Little fix in mediaplayer
    318 fixed standy-green screen bug, thx to divans tester
    317 bb make fix
    316 placebo for busybox.mk
    315 busybox upgrade to 1.11.2
    314 Added DVB-S2 support too SatFinder
    313 tuxtxt major fixes, new font, kill tuxtxt if e2 crashes
    312 fixes for moderate softstandby
    Picon 311 new channels for kids
    310 new button-GRAFIX
    309 new button-GRAFIX
    308 added cool effect in vfd on e2 startup, and extend vfd python interface: vfd_set_brightness (0-7), vfd_set_light (0-1)
    307 Fixed vfd driver
    Added 306 vfd customchar patch by nebman 2008/02/01
    see link: http://svn.nebman.net/ufs910/view/ne...tomchars.patch

    Changes by KF Team
    - Add fw_printenv for 1rst and 2nd bootloader
    - Changed rcS to source all kinds
    - / Var / etc / start_config contains switches for startup rpogram y / n
    - Added Dropbear
    - Added aafusbmount.sh

    Flash version additional
    - Modified fstab to mount mtdblock6
    - Reduced to Languague en ge
    - Stripped of all unneeded and pyo py
    - Added links to rw part for plug-ins and settings




    E2 Flash HOWTO
    Quote:

    *********************************************
    A big thanks to the tireless work of the TDT!
    Without them this would never have been possible.
    *********************************************

    E2 flash howto rev317
    =====================

    Warning:

    This may be erroneous to lead a useless box. Those with no experience with E2 from the USB stick and console via serial cable has, it should not try.
    The Flash image is rather full and does not allow additions without being a USB stick installs correctly. Will this trozdem tries, it may be that the box is no longer correct boots.
    Sender lists with 2 satellites should be no space problems, but more satellites must be used very carefully with the Plaz be dealt with.

    Precondition
    -----------------

    - An E2-image, which is on 2nd boot from the USB stick boots. It is an advantage if the possible revision of the image is equal to 317. Here in the forum is an appropriate image>> Here invite <<.

    - There is a kernel image for a Flash version with 317 and 2nd-boat used or needed. This is in the package.
    uImage-317.2nd

    - Unpacking the image parts with rare
    a rare E2F-kf-317-2nd.rar

    Procedure
    ------------

    1st The stick in the box and E2 from the USB stick boot

    2nd UImage the kernel-image 317.2nd and parts on the box copy
    ftp <ip-der-ufs910>
    am
    Put uImage-317.2nd
    Put mtdblock3.root-stock.enigma2
    Put mtdblock6.var-stock.enigma2

    3rd On the login box
    telnet <ip-der-ufs910>

    4th Old kernel secure
    cd / boot
    mv uImage uImage.orig

    5th Install new kernel
    mv / tmp/uImage-317.2nd uImage

    6th Sync
    sync

    7th Box reboot with this kernel
    reboot-f
    Box off and embroidery from the new boot.

    8th Correctness of the kernel check
    telnet <ip-der-ufs910>
    cat / proc / mtd

    Should look like

    mtd0: 00020000 00010000 boot firmware: 0xA000.0000-0xA001.FFFF "
    mtd1: 001e0000 00010000 "kernel - 0xA004.0000-0xA021.FFFF"
    mtd2: 00010000 00010000 "Config FS - 0xA022.0000-0xA022.FFFF"
    mtd3: 00b30000 00010000 "Root FS-0xA023.0000-0xA0D5.FFFF"
    mtd4: 00010000 00010000 "APP_Modules 0xA0D6.0000-0xA0D6.FFFF"
    mtd5: 00010000 00010000 "EmergencyRoot 0xA0D7.0000-0xA0D7.FFFF"
    mtd6: 00240000 00010000 "Other Data 0xA0D8.0000-0xA0FB.FFFF"
    mtd7: 00020000 00010000 "Boot Configuration 0xA002.0000-0xA003.FFFF"
    mtd8: 00010000 00010000 "2nd Boot Configuration 0xA0FC.0000-0xA0FC.FFFF"
    mtd9: 00030000 00010000 "2nd boot firmware: 0xA0FD.0000-0xA0FF.FFFF"
    mtd10: 00fc0000 00010000 "where Flash / bootloader 0xA004.0000-0xA0FF.FFFF"

    It is important mtd1 with 001e0000
    mtd3 with 00b30000
    and mtd6 with 00240000
    mtd7-9 and present
    9th IMPORTANT! Stopping processes
    pkill rcS
    pkill Enigma2



    he last command may not Enigma2 process with show
    If they do, kill the run again.

    10th Image parts Catt
    ACHTUNGi! can then only with the appropriate instructions Originaimage geflascht be.
    It takes a while the first block!

    mtdblock3.root cat-Enigma2> / dev/mtdblock3
    mtdblock6.var cat-Enigma2> / dev/mtdblock6
    cat / boot / uImage> / dev/mtdblock1

    11th Verifying

    mount-t jffs2 / dev/mtdblock6 / mnt
    ls / mnt
    Files must show and no error message
    vi / mnt / etc / resolv.conf
    This is the right gateway or DNS entry
    umount / mnt
    squashfs mount-t-o ro / dev/mtdblock3 / mnt
    ls / mnt
    Files must show and no error message
    umount / mnt

    If mistakes are here again 7 or even 3rd

    12th New bootargs on the 2nd-placed boat
    Via serial connection and putty the boot process interrupt
    Immediately after reboot enter button repeatedly press
    if the boot prompt comes back and press enter.
    It should ufs910> as a prompt to appear

    setenv ipaddr <deine-ip>
    setenv serverip <ip-des-nfs-oder-tftp-server>
    setenv gateway <gatewayip>
    setenv netmask <networkscreen>
    setenv bootargs' console = ttyAS0, 115200 root = / dev/mtdblock3 ip = $ ipaddr: $ serverip: $ gateway: $ netmask: Kathrein: eth0: off mem = 64m coprocessor_mem = 4m @ 0x10000000, 0x10400000 rootdelay 4m @ = 1 = nwhwconf device: eth0, HWaddr: $ ethaddr '
    setenv bootcmd bootm a0040000
    saveenv

    13th Restart
    boot

    You should now see the box from the flash boats.

    If it does not start in the first go - wait 20 seconds, then stop. Wait 20 seconds and turn on.

    Since your yes 2nd boat had been in operation, you can always boot from the stick. This box set, wait until the chase is once by (1rst bootloader) and then the exit button up "custom boot" is displayed. At the 14W is the Options button.

    Have fun wants the KF-team



    E2-USB HOWTO
    Quote:

    *********************************************
    A big thanks to the tireless work of the TDT!
    Without them this would never have been possible.
    *********************************************

    E2-USB howto rev317
    =====================

    Warning:

    This may be erroneous to lead a useless box. Those with no experience with USB stick and console via serial cable has, it should not try.

    Precondition
    -----------------

    - KF-1.06-mod 2nd boot on the Flash - KF-1.06-mod or equivalent image.

    - There is a kernel image for a Flash version with 317 and 2nd-boat used or needed. This package is in / boot / uImage

    - IP addresses in Preferences / Network adapt

    - E2-kf-317-usb.tar.rar

    Procedure
    ------------

    1st A USB flash drive with 2 partitions vfat and once again create ext2.

    2nd e2-kf-317-usb.tar.rar on Partition 2 unwrap.

    3rd Stick with the KF-1.06 booted box stuck.

    4th Vfat kernel to copy
    mount-t vfat / dev/sda1 / mnt
    mkdir / mnt / boot
    cp / boot / uImage / mnt / boot

    5th Sync
    sync

    6th Bootargs for Enigma2 set by the stick.
    In addition to the script / config/enigma2.sh of KF-1.06 take.
    The script adjust if necessary.
    sh / config/enigma2

    7th Bootargs of 1rst bootloader and 2nd-check Bootload
    / config / fw_printenv
    Shows the Bootargs from 1rst boat.
    we need

    bootcmd = go a0fd0000

    to be
    / usr / sbin / fw_printenv
    Shows the Bootargs from 2nd
    Here, it should look like

    bootcmd = bootm a0040000
    ethaddr = 00:1 d: ec: 00:00:00
    serverip = 192.168.1.100
    ipaddr = 192.168.1.101
    gateway = 192.168.1.1
    netmask 255.255.255.0 =
    bootargsusb = set bootargs console = ttyAS0, 115200 root = / dev/sda1 rw init = / bin / devinit ip = $ ipaddr: $ serverip: $ gateway: $ netmask: Kathrein: eth0: off mem = 64m coprocessor_mem = 4m @ 0x10000000, 4m @ 0x10400000 rootdelay = 10 = nwhwconf device: eth0, HWaddr: $ ethaddr
    bootargsusb = run bootusb; usb reset; ext2load usb 0:1 a5000000 boot / uImage; bootm a5000000
    bootcmdcustom = run bootusb
    bootargs = console = ttyAS0, 115200 root = / dev/mtdblock3 ip = 192.168.1.101:192.168.1.100:192.168.1.1:255.255.255.0: Kathrein: eth0: off mem = 64m coprocessor_mem = 4m @ 0x10000000, 0x10400000 rootdelay 4m @ = 1 nwhwconf = device: eth0, HWaddr: 00:1 d: ec: 00:00:00

    8th Box asusschalten

    9th Box set - wait until chases are done once,
    then Exit (Option button 14W) to press "custom boot" appears, then release.

    You should now see the box from the USB stick to boot.

    If it does not start in the first go (leave longer than 60 seconds when loading stand E2) - wait 20 seconds, then stop. Wait 20 seconds and turn on.

    Drueckt no button when you turn on, then booted the flash.
    If you have trouble booting from Flash occur all the sticks away and then boot.

    Q: How can I recover the first loader use?
    A: KF-1.06-mod flash of boats and over telnet / config / fw_setenv bootcmd bootm a004000

    Have fun wants the KF-team

    ---------------------------------------------
    Sh40, AML, prime focus 1,5m si altele ...

  12. #12
    Standard RSP member otheitis's Avatar
    Join Date
    02 Feb 2007
    Location
    Somewhere in Aegean Sea!!
    Posts
    2,925
    Mentioned
    0 Post(s)
    Rep Power
    82

    Default Re: e2-kf-317 pe Kathrein UFS-910

    Niste foto se poate?va rog!

    AB IPBOX 9000HD

    DVB/S2-CABLE TUNER

  13. #13
    Golden Member wambertos's Avatar
    Join Date
    27 Jul 2007
    Posts
    379
    Mentioned
    0 Post(s)
    Rep Power
    63

    Default Re: e2-kf-317 pe Kathrein UFS-910

    Quote Originally Posted by otheitis View Post
    Niste foto se poate?va rog!
    Fotos ar fi de culoare verde! Da errors pe banda rulanta. Nu se poate modifica nimic in meniu.
    Singurul lucru pozitiv, cum a spus si @zildan, e faptul ca merge mbox pe ea.
    AAF-team lucreaza in paralel la un image cu mbox.
    Rabdare...

  14. #14
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,511
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default e2-kf-317 pe Kathrein UFS-910

    Dupa multe peripetii am reusit sa stabilizez aceasta versiune.
    Cateva sfaturi:
    1. Problemele mari sunt la instalare datorita pierderii de date la dezarhivare.
    2. (EDIT) nu mai Recomand formatarea ext3 ( comanda de incarcare kernel e2 se da cu ext2 si nu mai veede partitia).
    3. Skynul cu care vine nu merge bine cu alt settings asa ca se schimba din meniu cu skynul default.
    4. Se pune DNS din meniu.
    5. La restart uneori nu face initializarea la USB si in consecinta nu porneste, daca nu ia un power off.
    6. Se copiaza mbox-enigma.sh40 in /var/keys, si cwshare.cfg, mbox.cfg, portlist in /var/keys
    7. Se poate pune comanda de pornire mbox in /etc/init.d/rcS sau alt script de acolo.

    Concluzia finala: MERGE, dar nu e inca pt cei care nu au nervi, timp si cunostinte de linux.

    Am observat ca au modificat alocarea ram-ului, in sensul ca acum apar 45 mega de ram, deci au redus de la video, diferenta pana la 64 fiind alocata video.
    Last edited by zildan; 31-10-08 at 17:57. Reason: Era o recomandare gresita la formatare
    Sh40, AML, prime focus 1,5m si altele ...

  15. #15
    Standard RSP member
    Join Date
    01 Sep 2008
    Posts
    34
    Mentioned
    0 Post(s)
    Rep Power
    57

    Default Re: Enigma 2 pe Kathrein UFS-910

    Image Info

    Enigma2 Team Ducktales Build rev356 AAF Mod 3.0

    Basis Team Ducktales Build rev356 vom 20.10.2008

    Changelog seit letzten offentlichen Release:

    Aenderungen seit E2 rev254 AAF Mod 2.0:

    Team Ducktales:
    + Neuer Grafiktreiber fur bessere Bildqualitaet
    + Neuer PTI Treiber mit Hardwaredescrambling Support fur CA1
    + Sonderzeichen in Tuxtxt (Videotext) funktionieren
    + Neue Schriftart im Tuxtxt fur bessere Lesbarkeit
    + VFD Unterstutzung fur eiegene Zeichen
    + VFD Helligkeitsregelung eingebaut
    + Softstandby Fixes
    + Mediaplayer ubernimmt Seitenverhaeltnis von TV Modus
    + Sendernamen bei Premiere Direkt
    + Seitenverhältnis bei 1440x1080 fixed
    + Speicheroptimierung fur mehr Stabilitaet
    + DVB-S2 Support im SatFinder
    + Symbolrate 30000 Problem behoben
    + Audio Problem bei Untertiteln behoben
    + Player aktualisiert

    AAF:
    + CAM Setup Menu
    + OSD Snapshot Funktion im Menu
    + aktuelles vfdctl 0.7.1 eingebaut

    Danke an Team Ducktales fur das super Basis Image, das gesamte AAF Team, obiwatn76, black_64, ewgene fur seine Skin Arbeit und alle die Dieses Image ermoeglicht und getestet haben.



    http://www.2shared.com/file/4136328/...AAF-Mod30.html

Page 1 of 6 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •