how to install image enigma2 on AMIKO VIPER 4K V30
https://jungle-team.com/como-instalar-imagen-en-amiko-viper-4k-v30/

using telnet

  1. Insert the USB drive with the image you want to flash
  2. Connect to the box using telnet (even if It's bootlooping, it works)
    1. The username is "root"

  3. Now use the command:
    1. ofgwrite -n <path-to-the-image>

  4. If this results with no errors, You can proceed to flash the image using this command:
    1. ofgwrite -k -r <path-to-the-image>



Note: the usb drive should be mounted in /media/hdd, so the image path should start with it.
For example: /media/hdd/amiko/u57, this should be the standard.