Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 11 of 11

Thread: TVR Card OSCAM SMARTMOUSE PROBLEM

  1. #1
    Member Visitor
    Join Date
    06 May 2020
    Location
    italy
    Posts
    9
    Mentioned
    1 Post(s)
    Rep Power
    0

    Default TVR Card OSCAM SMARTMOUSE PROBLEM

    hello,
    I'm new and I'm searching your kind help
    I've ax hd 61 and oscam emu
    I've usb smartreader and I'd like to watch my tvr card.
    after some seconds it stops

    this is my oscam.server
    [reader]
    label = TVR_S
    protocol = mouse
    device = /dev/ttyUSB0
    caid = 0B02
    detect = cd
    mhz = 350
    ident = 0B02:000000
    group = 1
    emmcache = 1,3,2,0


    this is the log:

    • 2020/05/06 21:59:44 59A6CD22 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0B02 ECM_PID: 0B02 PROVID: 000000
    • 2020/05/06 21:59:44 59A6CD22 c (dvbapi) Demuxer 0 found 1 ECM pids and 2 STREAM pids in CA PMT
    • 2020/05/06 21:59:44 59A6CD22 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC
    • 2020/05/06 21:59:45 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:F72FAC9B8010A1B1B04E3DDB2E431EF2): found (362 ms) by TVR_S
    • 2020/05/06 21:59:49 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:24930FED513CB1A56CFBBA12D186E7B3): found (358 ms) by TVR_S
    • 2020/05/06 21:59:59 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:26FF93787FC0F38B08436F165F234375): found (360 ms) by TVR_S
    • 2020/05/06 22:00:09 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:93655CEB792F5C1E704B3AAC94EA3937): found (358 ms) by TVR_S
    • 2020/05/06 22:00:19 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:3633D8219E9C10F399919D0911FA4245): found (359 ms) by TVR_S
    • 2020/05/06 22:00:29 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:3DD283A8EDE22CD9CC87BE6F2688C721): found (358 ms) by TVR_S
    • 2020/05/06 22:00:44 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:4E9EE4AF82470AC2FF976899659BC546): timeout (5000 ms) by TVR_S
    • 2020/05/06 22:00:46 58E9D6AE r (reader) TVR_S [conax] Warning: needed try nr 2, next ECM has some delay
    • 2020/05/06 22:00:49 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:4E9EE4AF82470AC2FF976899659BC546): timeout (5000 ms) by TVR_S
    • 2020/05/06 22:00:49 59A6CD22 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
    • 2020/05/06 22:00:49 59A6CD22 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC
    • 2020/05/06 22:00:54 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:A2BC24B9E1783B24CEF937959C05F077): timeout (5000 ms) by TVR_S
    • 2020/05/06 22:00:55 59A6CD22 c (-) -- Skipped 1 duplicated log lines --
    • 2020/05/06 22:00:55 59A6CD22 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
    • 2020/05/06 22:00:55 59A6CD22 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 0B02 ANY CHID PMTPID 1B67 VPID 05DC
    • 2020/05/06 22:00:59 59A6CD22 c (ecm) dvbapi (0B02@000000/0000/000F/67:A2BC24B9E1783B24CEF937959C05F077): timeout (5000 ms) by TVR_S











    I'm really unable to do anything can someone help me please? I don't know what to do
    thank you very much
    best regards

  2. #2
    RSP - TEAM horatyu's Avatar
    Join Date
    16 Aug 2007
    Location
    SIBIU
    Posts
    5,748
    Mentioned
    63 Post(s)
    Rep Power
    113

    Default

    Put into your oscam


    [reader]
    label = TVR
    description = TVR
    protocol = mouse
    device = /dev/ttyUSB0
    services = tvr_hd
    lb_whitelist_services = tvr_hd
    caid = 0B02
    detect = cd
    ident = 0B02:000000
    group = 1
    emmcache = 1,3,2,0
    blockemm-unknown = 1
    lb_weight = 300
    deprecated = 1



    But in services, must this for not autentification caid in
    "Focus Tv"

    [TVR]caid = 0B02
    provid = 000000
    srvid = 0001, 0002, 0003, 0004, 0005, 0006, 0007, 0008, 000A, 000F
    LA TOTI NI GREU
    "SGU Stargate Universe"

  3. #3
    Member Visitor
    Join Date
    06 May 2020
    Location
    italy
    Posts
    9
    Mentioned
    1 Post(s)
    Rep Power
    0

    Default

    it's the same also if i put another card it stops after seconds





    Make 2 group===> 1 for TVR and 2 for MTV

    In oscam readers edit caid and ident.
    Only caid for TVR and MTV. I send image where You must edit.



    hello, i've tried it but I'm not very good with this kind of things so maybe I made some mistakes
    would you agree to share with you oscam files in order to modify it?

    thank you very much
    best regards





  4. #4
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,512
    Mentioned
    93 Post(s)
    Rep Power
    100

    Default

    Daca scrii in italiana intelegem, lingua romana e foarte asemanatoare.
    Sh40, AML, prime focus 1,5m si altele ...

  5. #5
    Member Visitor
    Join Date
    06 May 2020
    Location
    italy
    Posts
    9
    Mentioned
    1 Post(s)
    Rep Power
    0

    Default

    ciao
    sto tentanto di far funzionare la card di tvr nel mio smartmouse (argolis smarteader) ma dopo circa 60 secondi si blocca
    lo stesso succede se inserisco e configuro in oscam altre carte (tipo mtva ungheria sui 9 est)
    potete aiutarmi?
    posso condividere i file oscam e Voi me li modificate?
    non sono molto capace

    decoder: axhd 61
    immagine: openatv 6.3

    se la risposta è sì quali file devo mandarvi?
    grazie mille
    saluti

  6. #6
    Standard RSP member
    Join Date
    15 Nov 2011
    Posts
    34
    Mentioned
    1 Post(s)
    Rep Power
    46

    Default

    forse sarebe meglio che ci dici anche che versione di smartreader e che firmware ai installato su di lui.

  7. #7
    Member Visitor
    Join Date
    06 May 2020
    Location
    italy
    Posts
    9
    Mentioned
    1 Post(s)
    Rep Power
    0

    Default

    buongiorno,
    lo smartreader non riesco ad aggiornarlo (se lancio il programma per aggiornarlo, non trova nessun dispositivo)

    è la versione v.2

    funziona solo per pochi secondi, poi si blocca

    grazie mille per l'aiuto

    buona giornata

  8. #8
    Standard RSP member
    Join Date
    15 Nov 2011
    Posts
    34
    Mentioned
    1 Post(s)
    Rep Power
    46

    Default

    allora per me e una problema con il smartreader, prova a installare su un vecchio pc ubuntu server x64 (meglio il 16.04) con gli relativi driver per il tuo smartreader e doppo installa anche oscam e vedi se la funziona, stai atento di metere gli driver giusti per il tuo smartreader, per aggiornarlo prova un pc con windows 7 e quando lanci il programma per l`aggiornamento farlo con gli permesi di windows xp.
    fammi capire una cosa, vedo che il tuo decoder ce lha gia il lettore delle schede, anche con il suo fa steso problema?

  9. #9
    Member Visitor
    Join Date
    06 May 2020
    Location
    italy
    Posts
    9
    Mentioned
    1 Post(s)
    Rep Power
    0

    Default

    Quote Originally Posted by nice.guy12 View Post
    allora per me e una problema con il smartreader, prova a installare su un vecchio pc ubuntu server x64 (meglio il 16.04) con gli relativi driver per il tuo smartreader e doppo installa anche oscam e vedi se la funziona, stai atento di metere gli driver giusti per il tuo smartreader, per aggiornarlo prova un pc con windows 7 e quando lanci il programma per l`aggiornamento farlo con gli permesi di windows xp.
    fammi capire una cosa, vedo che il tuo decoder ce lha gia il lettore delle schede, anche con il suo fa steso problema?
    non sono molto pratico, non credo di poterci riuscire.
    il card reader interno funziona bene
    un saluto

  10. #10
    Standard RSP member
    Join Date
    15 Nov 2011
    Posts
    34
    Mentioned
    1 Post(s)
    Rep Power
    46

    Default

    Quote Originally Posted by 4Himdj View Post
    il card reader interno funziona bene
    con le schede di tvr funziona senza che si fa buio doppo 60secondi? se si, allora il problema e come avevo pensato, puo esere anche un problema dei driver....

  11. #11
    Happy fery21's Avatar
    Join Date
    18 Feb 2008
    Location
    Big Bang
    Posts
    2,454
    Mentioned
    6 Post(s)
    Rep Power
    76

    Default

    Fai un logo e metila qui poi vedremo quale e il tuo errore.
    ..::EGAMI TEAM::..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •