Thanks:
17
Likes:
8
Dislikes:
0
-
Ncam V12.3 r0
-CMake - Update minimum required version
(trac.streamboard.tv/oscam/changeset/11698)
-Fix some GCC 11 warnings
-(trac.streamboard.tv/oscam/changeset/11699)
-Fix some typos and cosmetics
-(trac.streamboard.tv/oscam/changeset/11700)
ipk
http://www.mediafire.com/file/ke0f3n...S-IPK.zip/file
deb
http://www.mediafire.com/file/gao9in...x-DEB.zip/file
---------- Post added at 22:12 ---------- Previous post was at 21:16 ----------
Linux-pc 32 bit
http://www.mediafire.com/file/qs6hjr...m.x86.zip/file
Linux-pc 64 bit
http://www.mediafire.com/file/9fhw0p...86_64.zip/file
-
-
Ncam V12.4 r1
The ipk file has been updated and the TeamBlue image paths are modified
ipk
https://www.mediafire.com/file/er0gn...1_all.ipk/file
-
Package: enigma2-plugin-softcams-ncam-reloaded V.2.0_rel. 115_220122
ARM architecture (Example: Vusolo4k)
openPLI enigma2 develop version , and similar
webIF port: 17001
Version: 2.0-r220122, build 115 of jan 22, 2022
Removed: "Reader services settings" section in the web interface
Depends: libc6 (>= 2.30), libcrypto1.1 (>= 1.1.1g), libssl1.1 (>= 1.1.1g), libusb-1.0-0 (>= 1.0.22)
IF you have a previous working version and you want to keep your settings:
1- Rename your existing binary app 'ncam-reloaded-2.0'
2- Take the new binary "ncam-reloaded-2.0" app from the .ipk and upload it to your box
Package name and Checksum:
9ba45ae9589c643fd4a462b74e48a903 enigma2-plugin-softcams-ncam-reloaded_2.0-r210122-build-115_armv7ahf-neon.ipk
thx to carloscarlosa
https://www.mediafire.com/file/cnosf...-neon.ipk/file
-
NCam 5.5-r1
Changelog v5.5-r1:
- Increased the limit of allowed clients.
- Fixes and optimizations in doublecheck.
- Fixes for DGcrypt and add Caid 4AB0.
- Add force ipv4 (Only viewable using IPV6).
- Increased MAX_ECM_SIZE for SECA/NAGRA/NAGRA_MERLIN.
https://www.mediafire.com/file/juv7z....5-r1.rar/file
-
NCam cardserver v5.6-r2
#########################################################################
OFFICIAL version
NCam cardserver v5.6-r2, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas).
Source Code: https://github.com/javilonas/NCam
Mirror Source Code: https://github.com/ncam-project/NCam
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-openpli_40 Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).
ncam.mips-uclibc Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.vuplus4k_arm Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).
ncam.james_donkey_arm Enigma2 - ARM (James Donkey DUO and similar).
ncam.arm-aarch64-dreambox Enigma2 - ARM (Dreambox ONE|TWO).
ncam.arm-dreambox Enigma2 - ARM (Dreambox DM9x0 UHD).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Synology Armada 37xx and aarch64 similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Mips (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam.router-openwrt-huawei-hg556a.mips Mips (Routers openwrt Huawei HQ556a).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
***********************************************************************************************
Ncam settings web:
Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam
Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID (Important to respect all 16 characters).
Change serverip (CCcam) 192.168.xx.xx to the ip of the receiver.
Change extended_cw_api in ncam.conf (Use 1 for ARM (OE2.2), use 2 MPISEL (OE2.0)).
Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:
max_time = 18 // The time that the ECMs are going to be ?Keep in the cache?.
cw_cache_size = 8000 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).
cw_cache_memory = 16 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!
The emulator is inactive by default.
***********************************************************************************************
Changelog v5.6-r2:
- Remove Gbox protocol.
- Support CCcam 2.3.8 and 2.3.9 (Server/Client).
- Fixes for Newcamd Stealth.
- Add select menu Stealth mode for readers (Default NCam).
- Fixes for Skip CWs cheksum for Nagra/Seca.
- Some changes in dvbapi_set_section_filter for dvn.
- Small change with ECM table for dvn (DVBAPI).
- Update init and do ECM for reader-jet.
- Update decrypt_cw_ex for StreamGuard.
- Fix small BUG for readers internal/external.
- Fixes for WEBIF selectd MGcamd reader (newcamd server emulate).
- Added new builds for: Huawei HQ556a, Dreambox DM9x0 UHD and ONE|TWO,
James Donkey DUO, Vu+ Zero|Uno|Duo|Solo|Ultimo 4K, Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'.
- Minor fixes for lower CPU/RAM consumption.
- Internal adjustments for better Cache/CW CYCLE performance.
- Small fix for smoother zapping with NCam protocol.
- Updated sample and configuration files with a bit more detail.
--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal/platform without its corresponding suscription.
You, as an end user, will be responsible for the use that you will make and neither I (Javier Sayago)
https://mega.nz/file/eBQm0RxQ#MKaDbJ...5E73uOcLDVeCFI
-
enigma2-plugin-softcams-ncam_V12.4-r3_all.ipk
fix installation on OpenaTV,Vix and OpenBH
https://www.mediafire.com/file/9qij0...l.ipk.rar/file
-
Ncam V12.5
-New option is useful for N lines (cccam_cfg_inactivity)
-Fix read Biss keys from Softcam.key
-Some update codes
-Update Free servers
ipk
http://www.mediafire.com/file/ke0f3n...S-IPK.zip/file
deb
http://www.mediafire.com/file/gao9in...x-DEB.zip/file
linux x64
http://www.mediafire.com/file/9fhw0p...86_64.zip/file
-
NCam 5.8-r0 (oficial)
Changelog v5.8-r0:
- Added option for demux control via webif.
- Built-in libcrypto libraries internally.
- Added the option to restart the actual card reader in case of detecting many errors.
- Fixed small BUG with IPV4/IPV6.
- Fix for warning: bad timing affecting full handling of ecms.
https://www.mediafire.com/file/104mp....8-r0.rar/file
-
NCam 6.0-r0 (oficial)
Changelog v6.0-r0:
- Fixed a small BUG with the timeout logic (ecmtimeoutlimit and ecmnotfoundlimit).
Changelog v5.9-r0:
- Fix DEMUX for all selected (-1 for default)
https://www.mediafire.com/file/fewmn....0-r0.rar/file
---------- Post added at 01:57 ---------- Previous post was at 00:01 ----------
Ncam_V12.5-r1
Changelog
some fixes and OpenTR image support
ipk
http://www.mediafire.com/file/ke0f3n...S-IPK.zip/file
-
NCam 6.1-r4 (oficial)
Changelog v6.1-r4:
- Fix socket leaking.
- Update CW Cycle and others.
- Fix protocol webif, add others.
- Try Timeout and NOK solution.
- Clean global all emms from all readers after 30 days emm is last seen or 4 hours.
- Try kill free job data to timeout.
- Fix for protocol EMU.
- Update and more fixes.
- Fix restart.
- Fix for CW Cycle Max.
- Add new options to webif, resets readers (noks and timeouts).
- Increased Max Cycle List Entrys to 8000 Entrys.
- Increased Max Keep Cycletime to 480 min. (8 hours).
https://www.mediafire.com/file/iday3....1-r4.rar/file
-
NCam 6.2-r0 (oficial)
Changelog v6.2-r0:
- Fix restart, logs and warnings.
- Add latest changes Oscam.
https://www.mediafire.com/file/jhc1y....2-r0.rar/file
-
-
Ncam V12.6
-Test Version for download AFN keys
-[dvbapi] Clear ECM pids on CA PMT updates as well
(ECM pids where not cleared when a CA PMT update was received. This was actually a bug carried over from the old code.)
-[dvbapi] Only process valid CAIDS and ECM / EMM pids
(CAID 0x0000 is not valid (reserved by EBU). Pid 0x1FFF is reserved for NULL packets.)
-[dvbapi] Make log message more clear
(When there is a transition from scrambled to FTA or vice versa for a channel, we are not exactly continuing descrambling)
-[dvbapi] Do not block ECM / EMM pid 0x1FFF
-(ECM pid 0x1FFF is used in the fake ecm request for BISS. We cannot block it!)
-In this version we try to make ncam to download new keys for AFN channels from any files that always up to date on github ...
(I have use default this files inside ncam.server config file (Thank you JetCamFastCam))
-The ncam.server file now update and you can find the new reader like this
[reader]
### This reader automatically downloads afn keys into memory if label = github:"and path" and if the keys are invalid or missing from the SoftCam.Key file. If you want to find the keys, use debug 2 or 4.
### If the downloaded keys are invalid or expired, the reader will automatically download them again after 5 minutes, no need to restart ncam or use external scripts.
#label = github:"and path"
label = github:JetCamFastCam/JetFastCamRza/main/SoftCam.Key
#label = github:fairbird/MyImagesFeeds/master/SoftCam-Files/SoftCam.Key
#label = github:smcam/s/main/SoftCam.Key
#label = github:MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
enable = 1
protocol = emu
#device = emulator
#device = https://raw.githubusercontent.com/fa...es/SoftCam.Key
#device = https://raw.githubusercontent.com/sm...in/SoftCam.Key
#device = https://raw.githubusercontent.com/Je...in/SoftCam.Key
device = https://raw.githubusercontent.com/MO...a2/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000, 001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
Display Less
So you can add and url what you like in (label) option
-If the downloaded keys are invalid or expired, the reader will automatically download them again after 5 minutes, no need to restart ncam or use external scripts.
P.s: The keys should be update in softcam.keys in github what you are using. If not update it then ncam will download old keys.
ipk
http://www.mediafire.com/file/ke0f3n...S-IPK.zip/file
deb
http://www.mediafire.com/file/gao9in...x-DEB.zip/file
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules