Zgemma H7S H7C 4K Combo DVB-S2X

[laleauaneagra]

e prima oara cand au ca se blocheaza mutantu cu hdd intern....eu am hdd de PC pe el...ditamai hardu de mare....se misca mai repede octagonu?....sti mi e imi place ca asemenea afirmatii sa fie facute cu cronometru in mana...altfel....e o simpla iluzie.....asa ca la femei cand iti place una mai mult

[vicu432]

Ai octagon si ai probat ?
Am zis asta este o părere de a mea ,părerile sant impărțite . Mie mai mult imi place octagon . CI+ funcționează cu celelalte cam-ri care sant in comerț ,mai puțin portocala , dar se va rezolva asta foarte curand . Nu vreau sa te superi pe mine .

[laleauaneagra]

dar stai lin ...nu ma supar

[horatyu]

Pune-o în ţiplă

[mario08]

Poate va ajuta asta

How to install an Image to Multiboot:

Download your Image for install on multiboot.
IMPORTANT Don´t unzip the .zip File
Then shift it to the USB Drive
Plug the USB Device in the HD51.
Step 1: Press the blue key on the remote, then press the right key and go to Flash Online
Step 2: Now press the yellow button, now below might stand STARTUP_2 (it gives Startup 2,3. 4).
Step 3: Press the blue key and now the yellow key then go to your USB Device
Step 4: Go to the .zip and press the green button on the remote.
Step 5: Now the Ax is flashing the Image


How to use Multiboot:
Step 1: Press MENU on your remote and go to Standby/Restart then go to Multiboot and press OK
Step 2: Now you can select your image with the right/left key and start with the OK key

sau metoda asta de aici - https://www.linuxsat-support.com/thr...nternal-flash/

[zildan]

M-am lamurit!
Prin procedura stick USB, apasat buton din fatza, apoi power ON se instaleaza doar imaginile primare.
Mai exact prima imagine din cele 4 posibile se scrie asa, dar face curat in flash,
Imaginile primare scrise cu stickul sunt dezarhivate, 5 fisiere in directorul /zgemma/h7/ :

rootfs.tar.bz2
disk.img
imageversion
kernel.bin
noforce

---------- Post added at 22:49 ---------- Previous post was at 21:00 ----------

La OpenPli e clara situatia, exista la orice buid o imagine multiboot, si una de update USB !!!!!
La OpenATV altii exista doar imagine USB care se scrie multiboot.

[zildan]

PVu merge cu keile informed daca setezi in oscam:
extended_cw_api = 1

[laleauaneagra]

care sant keile....ca imi da key not found....ultimu softcam informed

[tray]

Poate va ajuta asta

How to install an Image to Multiboot:

Download your Image for install on multiboot.
IMPORTANT Don´t unzip the .zip File
Then shift it to the USB Drive
Plug the USB Device in the HD51.
Step 1: Press the blue key on the remote, then press the right key and go to Flash Online
Step 2: Now press the yellow button, now below might stand STARTUP_2 (it gives Startup 2,3. 4).
Step 3: Press the blue key and now the yellow key then go to your USB Device
Step 4: Go to the .zip and press the green button on the remote.
Step 5: Now the Ax is flashing the Image


How to use Multiboot:
Step 1: Press MENU on your remote and go to Standby/Restart then go to Multiboot and press OK
Step 2: Now you can select your image with the right/left key and start with the OK key

sau metoda asta de aici - https://www.linuxsat-support.com/thr...nternal-flash/

Eu nu nu am reusit procedura. Imi apare mesajul ca este nevoie de minim 300 mb spatiu liber de memorie, in conditiile in care sunt 403 mb liberi. Care ar fi problema?