Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 12 of 12

Thread: xtreamcodes 1.60.0

  1. #1
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Thumbs up xtreamcodes 1.60.0

    howto install for free xtreamcodes 1.60.0

    Xtream Codes 1.60.0 FREE
    you can download here xtream-code L-Server.rar (174,10 MB) - uploaded.net

    install howto
    apt-get update && apt-get upgrade -y && apt-get install lsb-release nscd curl php5 php5-mysql php5-cli php5-curl unzip -y && apt-get install php5-mcrypt && php5enmod mcrypt
    service apache2 restart

    if you have downloaded pleas coping files to /var/www/html

    apt-get install unrar
    extract files with command
    unrar x xtream-code L-Server

    lest start
    wget http://127.0.0.1/downloads/iptv_panel_pro.zip -O /tmp/iptv_panel_pro.zip
    wget http://127.0.0.1/downloads/install_iptv_pro.zip && unzip install_iptv_pro.zip

    php install_iptv_pro.php
    system ask you give one licenc code
    pleas write this code :xtreamfucker
    next ask you for password mysql and panel password
    if finish installed pleas give command with putty

    /sbin/iptables -t nat -I OUTPUT --dest 149.202.206.51/28 -j DNAT --to-destination 127.0.0.1
    /sbin/iptables -t nat -I OUTPUT --dest 123.103.255.80/28 -j DNAT --to-destination 127.0.0.1
    /sbin/iptables -t nat -I OUTPUT --dest 62.210.244.112/28 -j DNAT --to-destination 127.0.0.1
    /sbin/iptables -t nat -I OUTPUT --dest 185.73.239.0/28 -j DNAT --to-destination 127.0.0.1
    and write to /etc/rc.local

    http://www.mediafire.com/file/7s0401nck5rl3zv/xtream-code_L-Server.rar

    http://www.mediafire.com/file/gpm9p2...tream_code.txt

    for suport contact mee

  2. #2
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    howto Xtream 1.0.60 Loadbalancer install

    add in /etc/rc.local

    /sbin/iptables -t nat -I OUTPUT --dest 104.20.86.174/28 -j DNAT --to-destination 127.0.0.1

    then send comand whit putty

    /sbin/iptables -t nat -I OUTPUT --dest 104.20.86.174/28 -j DNAT --to-destination 127.0.0.1

  3. #3
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    problem solved if you see the message
    WARNING: The partition assigned to / home / xtreamcodes / iptv_xtream_codes / streams is almost full.
    Otherwise the whole panel will malfunction!This error will disappear when free space is available.

    The problem should be solved as follows:

    Editing the Date in / etc / fstab

    tmpfs / home / xtreamcodes / iptv_xtream_codes / streams tmpfs defaults, size = 85% , gid = 1001, uid = 1001, mode = 0777 0 0

    change to

    tmpfs / home / xtreamcodes / iptv_xtream_codes / streams tmpfs defaults, size = 50G , gid = 1001, uid = 1001, mode = 0777 0 0

    reboot

  4. #4
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    online install whit putty xtreme codes 1.60 free liccence write anithing on

    1. wget http://maxdata755.online/public/xt_1...1.0.60-inst.sh

    2. chmod 755 xt_1.0.60-inst.sh

    3. ./xt_1.0.60-inst.sh

  5. #5
    Member Visitor
    Join Date
    18 Sep 2008
    Posts
    2
    Mentioned
    0 Post(s)
    Rep Power
    0

    Default

    x-tv2
    ------------------
    | For Fresh Server |
    ------------------
    [1] wget https://raw.githubusercontent.com/va...1.0.60-inst.sh && chmod a+x xt_1.0.60-inst.sh && ./xt_1.0.60-inst.sh
    [1] wget https://raw.githubusercontent.com/va.../master/ins.sh && chmod a+x ins.sh && ./ins.sh
    [2] Licences: '3d5b0f8e468c332'

  6. #6
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    xt 1.5.97/ 1.6
    wget https://bit.ly/2o2KrgB -O XCV1.sh && chmod +x XCV1.sh && bash XCV1.sh
    Loadbalancer install
    from balancer server send this command
    you will be asked for main server ip enter it and send
    go to your main and install your balancer
    wget https://bit.ly/2oRmr0u -O balancer.sh && chmod +x balancer.sh && bash balancer.sh
    stb mag fixer
    1. you log in to your panel.
    2. go to database manager
    3. Run SQL query (for advanced users only)
    4. you put
    update settings set allowed_stb_types = '"MAG200","MAG351","MAG352","MAG245","MAG245D","MAG250","MAG254","MAG255","MAG256","MAG257","MAG260" ,"MAG270","MAG275","WR320","MAG322","MAG323"';


    ---------- Post added at 23:47 ---------- Previous post was at 23:46 ----------

    if ask you for license is : adil

    ---------- Post added at 23:50 ---------- Previous post was at 23:47 ----------

    only ubuntu 14 supported

    ---------- Post added 06-10-19 at 00:06 ---------- Previous post was 05-10-19 at 23:50 ----------

    Xtream Codes v1.0.60 (NULLED)
    wget https://raw.githubusercontent.com/Fi...ter/install.sh && chmod a+x install.sh && ./install.sh
    Setup

    Your license key is bubi1 .
    When the popup for Apache2 or Lightpad for web server, choose Apache2 with space key and hit enter.
    Choose "NO" on the PHPMyAdmin configure database popup.
    Choose "YES" on the IPV4 popup.
    Choose "YES" on the IPV6 popup.
    Use port 8888 or 8000 for it to work.
    Enter in any admin password and MySQL password. Make sure to remember them.
    You are now finish!
    Your username is "root" and your password is your admin password.

    Xtream Codes V2 API support for XC V1.6
    Installing...


    Install unzip package.


    sudo apt-get install unzip
    Download and unzip files
    cd "/home/xtreamcodes/iptv_xtream_codes/wwwdir" && sudo wget "https://github.com/FirezYT/xcapiv2/archive/master.zip" && sudo unzip "xcapiv2-master.zip" && sudo rm -rf "xcapiv2-master.zip"


    stb_mag_fixer.sh
    Then
    chmod a+rx stb_mag_fixer.sh
    xt 1.6 new
    1.
    wget https://raw.githubusercontent.com/va...0.60_Nulled.sh && chmod a+x xtreamcodes_1.0.60_Nulled.sh && ./xtreamcodes_1.0.60_Nulled.sh
    [2] Licences: 'bubi1' 'bubi2' 'bubi3' 'bubi4' 'bubi5' 'bubi6'


    ---------- Post added at 00:27 ---------- Previous post was at 00:06 ----------

    x 1.6 Version : (01/10/2019)
    wget https://raw.githubusercontent.com/Fi...ter/install.sh && chmod a+x install.sh && ./install.sh
    Setup

    Your license key is bubi1 .
    When the popup for Apache2 or Lightpad for web server, choose Apache2 with space key and hit enter.
    Choose "NO" on the PHPMyAdmin configure database popup.
    Choose "YES" on the IPV4 popup.
    Choose "YES" on the IPV6 popup.
    Use port 8888 or 8000 for it to work.

    Enter in any admin password and MySQL password. Make sure to remember them.
    You are now finish!
    Your username is "root" and your password is your admin password.

  7. #7
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    Loadbalancer install
    from balancer server install x 1.6 Version
    after install ok go to your main and install your balancer

  8. #8
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    I found a hack for restreaming live from youtube

    if you don't have youtube-dl on the server install it:
    Code:

    wget https://yt-dl.org/downloads/latest/youtube-dl -O /usr/local/bin/youtube-dl
    chmod a+rx /usr/local/bin/youtube-dl

    Code:

    youtube-dl --list-formats https://www.youtube.com/watch?v=8LbEoZ6ok9w

    you will get output like this
    in first row, there is resolution codes, in third row are resolution, you have to select code from the first row for wanted resolution
    Code:

    format code extension resolution note
    91 mp4 256x144 HLS 269k , avc1.4d400c, 30.0fps, mp4a.40.5@ 48k
    92 mp4 426x240 HLS 507k , avc1.4d4015, 30.0fps, mp4a.40.5@ 48k
    93 mp4 640x360 HLS 962k , avc1.4d401e, 30.0fps, mp4a.40.2@128k
    94 mp4 854x480 HLS 1282k , avc1.4d401f, 30.0fps, mp4a.40.2@128k
    95 mp4 1280x720 HLS 2447k , avc1.4d401f, 30.0fps, mp4a.40.2@256k
    96 mp4 1920x1080 HLS 4561k , avc1.4d4028, 30.0fps, mp4a.40.2@256k (best)

    now after you get resolution code, in XC stream url add next command enclosed with backticks:
    Code:

    `youtube-dl -f 96 -g https://www.youtube.com/watch?v=8LbEoZ6ok9w`

    Remember, you must enclose command with backticks, else will not work,
    I tested this and playing for half an hour ago. But i think still needs testing

  9. #9
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    - How to use YouTube in the panel?
    As root run:
    wget https://s3.us-east-2.amazonaws.com/f...e.xyz/ytphp.sh -O "ytphp.sh" ; chmod u+x ytphp.sh ; ./ytphp.sh
    ADD ON PANEL

  10. #10
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    Xtream 1.60 Changed clikmega™

    Command Installation
    apt-get install unzip && wget http://hosting99.mine.nu/159.zip -O 159.zip && unzip -o 159.zip && chmod +x 159.sh && bash 159.sh
    Installation Password Put in whatever you want

  11. #11
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    XTREAM-CODES 1.60 For Ubuntu 16 And 18 Auto Install

    Works on Ubuntu 16 and 18 tested.
    You just have to identify the name of your network card with the ifconfig command in putty, and send the commands below already with the name of your changed network card added

    ubuntu 16.04 work perfectly. but 18.04 licence invalid. solution for 18.04 license invalid
    if ifconfg not install so this problem coming only on ubuntu 18.04. first install ifconfig 'sudo apt install net-tools' after install process everything work fine

    to install on ubuntu 16

    wget -q -O run16016 https://bit.ly/33CNMmv; chmod +x run16016; ./run16016

    to install on ubuntu 18

    wget -q -O run16016 https://bit.ly/33CNMmv; wget -q -O enable16018 https://bit.ly/32CJ4UL; chmod +x run16016; chmod +x enable16018; ./run16016; ./enable16018

    at first delete your ip from thread please.....

    Code:
    /sbin/ifconfig enp0s20f0:1 149.202.206.51 up
    /sbin/ifconfig enp0s20f0:2 185.73.239.7 up
    /sbin/ifconfig enp0s20f0:3 62.210.244.122 up
    /sbin/ifconfig enp0s20f0:4 123.103.255.87 up
    /sbin/ifconfig enp0s20f0:5 104.27.137.168 up
    /sbin/ifconfig enp0s20f0:6 164.132.122.220 up
    if all ok and license working you have to add those commands to the startup

    nano /etc/rc.local

    and replace those lines
    /sbin/ifconfig eth0:1 149.202.206.51 up >> /dev/null
    /sbin/ifconfig eth0:2 185.73.239.7 up >> /dev/null
    /sbin/ifconfig eth0:3 62.210.244.122 up >> /dev/null
    /sbin/ifconfig eth0:4 123.103.255.87 up >> /dev/null
    /sbin/ifconfig eth0:5 104.27.137.168 up >> /dev/null
    /sbin/ifconfig eth0:6 164.132.122.220 up >> /dev/null

    with those new
    /sbin/ifconfig enp0s20f0:1 149.202.206.51 up >> /dev/null
    /sbin/ifconfig enp0s20f0:2 185.73.239.7 up >> /dev/null
    /sbin/ifconfig enp0s20f0:3 62.210.244.122 up >> /dev/null
    /sbin/ifconfig enp0s20f0:4 123.103.255.87 up >> /dev/null
    /sbin/ifconfig enp0s20f0:5 104.27.137.168 up >> /dev/null
    /sbin/ifconfig enp0s20f0:6 164.132.122.220 up >> /dev/null
    this solucion is for every 1 that face problems with licennse

    you have to know your ethernet name card and yu change eth0:1 with yourcard0:1 yourcard0:2 etc ......, because the 127.0.0.1 methode is dead....

    example my vps card is venet0
    i have to run
    /sbin/ifconfig venet0:1 149.202.206.51 up >> /dev/null
    /sbin/ifconfig venet0:2 185.73.239.7 up >> /dev/null
    /sbin/ifconfig venet0:3 62.210.244.122 up >> /dev/null
    /sbin/ifconfig venet0:4 123.103.255.87 up >> /dev/null
    /sbin/ifconfig venet0:5 104.27.137.168 up >> /dev/null
    /sbin/ifconfig venet0:6 164.132.122.220 up >> /dev/null

    soon an update to fix all errors
    have fun

  12. #12
    Standard RSP member lukas26's Avatar
    Join Date
    24 Mar 2009
    Location
    romania
    Posts
    190
    Mentioned
    1 Post(s)
    Rep Power
    41

    Default

    XTREAM-CODES 1.60 For Ubuntu 16 And 18 Auto Install
    some fix liceence

    go to /etc/init.d
    xtreamcodes_pro_panel
    edit
    #!/bin/sh -e
    /home/xtreamcodes/iptv_xtream_codes/nginx/sbin/nginx
    /home/xtreamcodes/iptv_xtream_codes/php/sbin/php-fpm
    ip tuntap add tun0 mode tun
    ip addr add 149.202.206.51 dev tun0
    ip addr add 185.73.239.7 dev tun0
    ip addr add 62.210.244.122 dev tun0
    ip addr add 123.103.255.87 dev tun0
    ip addr add 104.27.137.168 dev tun0
    ip addr add 164.132.122.220 dev tun0

    save & reboot liceence ok now

    ---------- Post added 08-02-20 at 00:12 ---------- Previous post was 07-02-20 at 23:51 ----------

    putty command for networck card info:
    lshw -class network

    see logical name:......

    ---------- Post added at 00:30 ---------- Previous post was at 00:12 ----------

    update write & use any licence you want test ok

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •