xtreamcodes 1.60.0

[lukas26]

howto install for free xtreamcodes 1.60.0

Xtream Codes 1.60.0 FREE
you can download here xtream-code L-Server.rar (174,10 MB) - uploaded.net

install howto
apt-get update && apt-get upgrade -y && apt-get install lsb-release nscd curl php5 php5-mysql php5-cli php5-curl unzip -y && apt-get install php5-mcrypt && php5enmod mcrypt
service apache2 restart

if you have downloaded pleas coping files to /var/www/html

apt-get install unrar
extract files with command
unrar x xtream-code L-Server

lest start
wget http://127.0.0.1/downloads/iptv_panel_pro.zip -O /tmp/iptv_panel_pro.zip
wget http://127.0.0.1/downloads/install_iptv_pro.zip && unzip install_iptv_pro.zip

php install_iptv_pro.php
system ask you give one licenc code
pleas write this code :xtreamfucker
next ask you for password mysql and panel password
if finish installed pleas give command with putty

/sbin/iptables -t nat -I OUTPUT --dest 149.202.206.51/28 -j DNAT --to-destination 127.0.0.1
/sbin/iptables -t nat -I OUTPUT --dest 123.103.255.80/28 -j DNAT --to-destination 127.0.0.1
/sbin/iptables -t nat -I OUTPUT --dest 62.210.244.112/28 -j DNAT --to-destination 127.0.0.1
/sbin/iptables -t nat -I OUTPUT --dest 185.73.239.0/28 -j DNAT --to-destination 127.0.0.1
and write to /etc/rc.local

http://www.mediafire.com/file/7s0401nck5rl3zv/xtream-code_L-Server.rar

http://www.mediafire.com/file/gpm9p2...tream_code.txt

for suport contact mee

[lukas26]

howto Xtream 1.0.60 Loadbalancer install

add in /etc/rc.local

/sbin/iptables -t nat -I OUTPUT --dest 104.20.86.174/28 -j DNAT --to-destination 127.0.0.1

then send comand whit putty

/sbin/iptables -t nat -I OUTPUT --dest 104.20.86.174/28 -j DNAT --to-destination 127.0.0.1

[lukas26]

problem solved if you see the message
WARNING: The partition assigned to / home / xtreamcodes / iptv_xtream_codes / streams is almost full.Otherwise the whole panel will malfunction!This error will disappear when free space is available.

The problem should be solved as follows:

Editing the Date in / etc / fstab

tmpfs / home / xtreamcodes / iptv_xtream_codes / streams tmpfs defaults, size = 85% , gid = 1001, uid = 1001, mode = 0777 0 0

change to

tmpfs / home / xtreamcodes / iptv_xtream_codes / streams tmpfs defaults, size = 50G , gid = 1001, uid = 1001, mode = 0777 0 0

reboot

[lukas26]

online install whit putty xtreme codes 1.60 free liccence write anithing on

1. wget http://maxdata755.online/public/xt_1...1.0.60-inst.sh

2. chmod 755 xt_1.0.60-inst.sh

3. ./xt_1.0.60-inst.sh

[slroro]

x-tv2
------------------
| For Fresh Server |
------------------
[1] wget https://raw.githubusercontent.com/va...1.0.60-inst.sh && chmod a+x xt_1.0.60-inst.sh && ./xt_1.0.60-inst.sh
[1] wget https://raw.githubusercontent.com/va.../master/ins.sh && chmod a+x ins.sh && ./ins.sh
[2] Licences: '3d5b0f8e468c332'

[lukas26]

xt 1.5.97/ 1.6

wget https://bit.ly/2o2KrgB -O XCV1.sh && chmod +x XCV1.sh && bash XCV1.sh

Loadbalancer install
from balancer server send this command
you will be asked for main server ip enter it and send
go to your main and install your balancer

wget https://bit.ly/2oRmr0u -O balancer.sh && chmod +x balancer.sh && bash balancer.sh

stb mag fixer
1. you log in to your panel.
2. go to database manager
3. Run SQL query (for advanced users only)
4. you put

update settings set allowed_stb_types = '"MAG200","MAG351","MAG352","MAG245","MAG245D","MAG250","MAG254","MAG255","MAG256","MAG257","MAG260" ,"MAG270","MAG275","WR320","MAG322","MAG323"';

---------- Post added at 23:47 ---------- Previous post was at 23:46 ----------

if ask you for license is : adil

---------- Post added at 23:50 ---------- Previous post was at 23:47 ----------

only ubuntu 14 supported

---------- Post added 06-10-19 at 00:06 ---------- Previous post was 05-10-19 at 23:50 ----------

Xtream Codes v1.0.60 (NULLED)

wget https://raw.githubusercontent.com/Fi...ter/install.sh && chmod a+x install.sh && ./install.sh

Setup

Your license key is bubi1 .

When the popup for Apache2 or Lightpad for web server, choose Apache2 with space key and hit enter.

Choose "NO" on the PHPMyAdmin configure database popup.

Choose "YES" on the IPV4 popup.

Choose "YES" on the IPV6 popup.

Use port 8888 or 8000 for it to work.

Enter in any admin password and MySQL password. Make sure to remember them.
You are now finish!
Your username is "root" and your password is your admin password.

Xtream Codes V2 API support for XC V1.6
Installing...


Install unzip package.

sudo apt-get install unzip

Download and unzip files

cd "/home/xtreamcodes/iptv_xtream_codes/wwwdir" && sudo wget "https://github.com/FirezYT/xcapiv2/archive/master.zip" && sudo unzip "xcapiv2-master.zip" && sudo rm -rf "xcapiv2-master.zip"

stb_mag_fixer.sh

wget https://www.dropbox.com/s/ndvmwz7ocf...b_mag_fixer.sh

Then

chmod a+rx stb_mag_fixer.sh

xt 1.6 new
1.

wget https://raw.githubusercontent.com/va...0.60_Nulled.sh && chmod a+x xtreamcodes_1.0.60_Nulled.sh && ./xtreamcodes_1.0.60_Nulled.sh

[2] Licences: 'bubi1' 'bubi2' 'bubi3' 'bubi4' 'bubi5' 'bubi6'


---------- Post added at 00:27 ---------- Previous post was at 00:06 ----------

x 1.6 Version : (01/10/2019)

wget https://raw.githubusercontent.com/Fi...ter/install.sh && chmod a+x install.sh && ./install.sh

Setup

Your license key is bubi1 .
When the popup for Apache2 or Lightpad for web server, choose Apache2 with space key and hit enter.
Choose "NO" on the PHPMyAdmin configure database popup.
Choose "YES" on the IPV4 popup.
Choose "YES" on the IPV6 popup.
Use port 8888 or 8000 for it to work.

Enter in any admin password and MySQL password. Make sure to remember them.
You are now finish!
Your username is "root" and your password is your admin password.