FocusSat in VU+ SOLO SE V2

[peco]

Am incercat cu ambele variante dar din pacate fara rezultat:

Readerul este acum asa configurat:

[reader]
label = focussat
protocol = mouse
device = /dev/ttyUSB0
caid = 0B02
ecmwhitelist = 0B02:4E,53,60,65,72,84,9C,97
detect = cd
mhz = 500
group = 2
emmcache = 1,2,2,1



Log:
2015/12/20 11:20:47 615DF07E r (reader) focussat [mouse] card detected
2015/12/20 11:20:47 615DF07E r (reader) focussat [mouse] Buffers readed 0 bytes total time_us 75254
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] ATR: E7 7E 23 0F 80 C0 7C 20 C0 78 38
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] ERROR: Could not read reader->convention
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] Error activating card.
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] Buffers readed 0 bytes total time_us 75170
2015/12/20 11:20:49 615DF07E r (reader) focussat [mouse] ATR: E7 7E 23 0F 80 C0 7C 20 C0 78 38
2015/12/20 11:20:49 615DF07E r (reader) focussat [mouse] ERROR: Could not read reader->convention
2015/12/20 11:20:49 615DF07E r (reader) focussat [mouse] Error activating card.
2015/12/20 11:20:50 721EC1F5 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/12/20 11:20:50 615DF07E r (reader) focussat [mouse] Buffers readed 0 bytes total time_us 75163
2015/12/20 11:20:51 615DF07E r (reader) focussat [mouse] ATR: E7 7E 23 0F 80 C0 78 20 C0 7C 38
2015/12/20 11:20:51 615DF07E r (reader) focussat [mouse] ERROR: Could not read reader->convention
2015/12/20 11:20:51 615DF07E r (reader) focussat [mouse] Error activating card.
2015/12/20 11:20:52 615DF07E r (reader) focussat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/12/20 11:20:52 615DF07E r (reader) focussat [mouse] card initializing error

---------- Post added at 12:26 ---------- Previous post was at 11:30 ----------

Ha, in sfirsit. Am gasit pe un Forum german tipul sa las frecventele libere si oscamul si le alege singur. Acum merge.

Rederul pt focssat aata acum asa:

[reader]
label = focussat
protocol = mouse
device = /dev/ttyUSB0
caid = 0B02
ecmwhitelist = 0B02:4E,53,60,65,72,84,9C,97
detect = cd
mhz =
cardmhz =
group = 3
emmcache = 1,2,2,1

Am observat insa ca in Reader expired date este 31.12.2015. Se prelungeste tmpul in OSCAM (VU+) automat sau trebuie s-o activez in rec. original?

[gipe]

face oscamul update la card daca cel putin un user are au = 1

[roberto]

Imi trimite va rog cineva setariile corecte pentru VU+Solo SE V2 cu cardul focus (folosit cu readerul intern)?
Multumesc anticipant!

[IQ.]

Imi trimite va rog cineva setariile corecte pentru VU+Solo SE V2 cu cardul focus (folosit cu readerul intern)?
Multumesc anticipant!

http://ovidiumarius.blogspot.ro/2012...-on-oscam.html

[roberto]

Multumesc! Sunt foarte bune satarile pentru pornire.
Pe langa altele la Mhz am facut modificari dupa setarile originale din box:
mhz = 450cardmhz = 2700

[OzTm]

Poate, va rog, cineva sa explice cum sta treaba cu valorile astea doua (mhz si cardmhz). Am vazut mai multe variante "recomandate pentru focus" dar niciuna cu explicatii, si toate cu valori mult mai mici:
- mhz=500, cardmhz=500
- mhz=500, cardmhz=375
dar niciuna in care cardmhz sa ajunga la 2700. Nu as vrea sa incerc asemenea valori si sa observ ca dupa 2 saptamani mi se prajeste cardul, sau ceva de genul asta... Dar poate un specialist ne lumineaza asupra diferentei dintre cei doi parametri, si asupra valorilor standard / recomandate / maxime /periculoase pe care le putem seta.

Multumesc

[danysev]

vu solo se isi ia singur frecventele orice ai pune tu, asta la versiunile noi de oscam.
mhz=450
cardmhz=2700
explicatia aici