FocusSat in VU+ SOLO SE V2

[peco]

[reader]
label = SKY_DE_V1X
description = V13 or V14 (NDS)
protocol = internal
device = /dev/sci0
caid = 09C4,098C
boxid = 12345678
ins7e11 = 14
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,2,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = FOCUS
description = Focussat (Conax)
protocol = mouse
device = /dev/ttyUSB1
autospeed = 0
caid = 0B02
ecmwhitelist = 53,4E,4C,65,60,97,84,72,5F
detect = cd
mhz = 1000
cardmhz = 600
ident = 0B02:000000
group = 2
emmcache = 1,2,2,0
lb_weight = 400
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4 ,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:00 0000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE

OSCAM.log nu il gäsesc acolo unde ar trebui sa fie!?!:
[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /etc/tuxbox/config
emmlogdir = /etc/tuxbox/config
lb_mode = 0


unde ar putea sa fie?

[danysev]

deci reader focus in easymouse trebuie 3,3V(pe 5V cardul meu porneste dar nema raspuns) protocol phoenix mode .Apoi mhz (lasa default pe 3,57).Ai nevoie si de un oscam cu suport usb phoenix( Files>oscam.version trebuie sa cauti linia cardreader_phoenix: yes).Daca le ai pe astea verfica daca ai instalat ftdi driver si libusb(via ssh,telnet)
Exemplu :
[reader]
label = Focussat
enable = 1
protocol = mouse
device = /dev/ttyUSB0
pincode = 1234
services = focussat
lb_whitelist_services = focussat
autospeed = 0
caid = 0B02
ecmwhitelist = 0B02:4E,53,60,65,72,84,9C,97
detect = cd
mhz = 357 # Aici vei pune valoarea setata pe reader .Valoarea overclock depinde de card
ident = 0B02:000000
group = 1
emmcache = 1,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

Tu ai pus cardmhz= 600 Aici l-ai omorat .pune 357
Daca nu ma insel ar trebui sa fie /tmp (sym link) = /var/volatile/tmp/
Apropo grupul de la sky e acelasi cu cel de la emu ( pune alt numar la sky)

[gipe]

merge si mai simplu setat, nu tre sa complici daca nu trebuie

[reader]
label = focussat
protocol = mouse
device = /dev/ttyUSB0
caid = 0B02
ecmwhitelist = 0B02:4E,53,60,65,72,84,9C,97
detect = cd
mhz = 500
group = 2
emmcache = 1,2,2,1

merge cu configuratia la easymouse2 scrisa mai sus

[peco]

Am incercat cu ambele variante dar din pacate fara rezultat:

Readerul este acum asa configurat:

[reader]
label = focussat
protocol = mouse
device = /dev/ttyUSB0
caid = 0B02
ecmwhitelist = 0B02:4E,53,60,65,72,84,9C,97
detect = cd
mhz = 500
group = 2
emmcache = 1,2,2,1



Log:
2015/12/20 11:20:47 615DF07E r (reader) focussat [mouse] card detected
2015/12/20 11:20:47 615DF07E r (reader) focussat [mouse] Buffers readed 0 bytes total time_us 75254
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] ATR: E7 7E 23 0F 80 C0 7C 20 C0 78 38
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] ERROR: Could not read reader->convention
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] Error activating card.
2015/12/20 11:20:48 615DF07E r (reader) focussat [mouse] Buffers readed 0 bytes total time_us 75170
2015/12/20 11:20:49 615DF07E r (reader) focussat [mouse] ATR: E7 7E 23 0F 80 C0 7C 20 C0 78 38
2015/12/20 11:20:49 615DF07E r (reader) focussat [mouse] ERROR: Could not read reader->convention
2015/12/20 11:20:49 615DF07E r (reader) focussat [mouse] Error activating card.
2015/12/20 11:20:50 721EC1F5 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/12/20 11:20:50 615DF07E r (reader) focussat [mouse] Buffers readed 0 bytes total time_us 75163
2015/12/20 11:20:51 615DF07E r (reader) focussat [mouse] ATR: E7 7E 23 0F 80 C0 78 20 C0 7C 38
2015/12/20 11:20:51 615DF07E r (reader) focussat [mouse] ERROR: Could not read reader->convention
2015/12/20 11:20:51 615DF07E r (reader) focussat [mouse] Error activating card.
2015/12/20 11:20:52 615DF07E r (reader) focussat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/12/20 11:20:52 615DF07E r (reader) focussat [mouse] card initializing error

---------- Post added at 12:26 ---------- Previous post was at 11:30 ----------

Ha, in sfirsit. Am gasit pe un Forum german tipul sa las frecventele libere si oscamul si le alege singur. Acum merge.

Rederul pt focssat aata acum asa:

[reader]
label = focussat
protocol = mouse
device = /dev/ttyUSB0
caid = 0B02
ecmwhitelist = 0B02:4E,53,60,65,72,84,9C,97
detect = cd
mhz =
cardmhz =
group = 3
emmcache = 1,2,2,1

Am observat insa ca in Reader expired date este 31.12.2015. Se prelungeste tmpul in OSCAM (VU+) automat sau trebuie s-o activez in rec. original?

[gipe]

face oscamul update la card daca cel putin un user are au = 1

[roberto]

Imi trimite va rog cineva setariile corecte pentru VU+Solo SE V2 cu cardul focus (folosit cu readerul intern)?
Multumesc anticipant!

[IQ.]

Imi trimite va rog cineva setariile corecte pentru VU+Solo SE V2 cu cardul focus (folosit cu readerul intern)?
Multumesc anticipant!

http://ovidiumarius.blogspot.ro/2012...-on-oscam.html