OSCAM - OpenWrt

[tutri]

De azi dimi neata ma zbat sa compilez, in simplebuild, un oscam pentru un Buffalo WZR-HP-G300NH.
Din ceva cauza, nu vrea sa plece nici daca ii dau in cap.
Momentan ma chinui cu aceasta compilare:

+-------------------------------------------------------------------------------| OSCam ver: 1.20-unstable_svn rev: 10012 target: mips-openwrt-linux-uclibc-libusb
| Tools:
|  CROSS    = /opt/simplebuild/toolchains/tplink_backfire/bin/mips-openwrt-linux-uclibc-
|  CC       = /opt/simplebuild/toolchains/tplink_backfire/bin/mips-openwrt-linux-uclibc-gcc
| Settings:
|  CONF_DIR = /usr/local/etc
|  CC_OPTS  = -Os -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -w
|  CFLAGS   = -DWITH_LIBUSB=1
|  LDFLAGS  = -Wl,--gc-sections -DWITH_LIBUSB=1 -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L/opt/simplebuild/toolchains/tplink_backfire/lib
|  LIBS     = -lusb-1.0 -lrt -lpthread -ldl -lrt
|  UseFlags = USE_LIBUSB=1
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH HAVE_DVBAPI IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK CLOCKFIX WITH_EMU
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE CONSTCW
|  Readers  : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD
|  CardRdrs : PHOENIX SMARGO SMARTREADER 
|  Compiler : mips-openwrt-linux-uclibc-gcc (GCC) 4.3.3
|  Binary   : ../archiv/oscam-svn10012-tplink_backfire-webif-libusb-oscam-emu-patched
+-------------------------------------------------------------------------------

Am incercat sa bifez, debifez, rebifez multe, dar nu vrea sa plece nicicum.

Ceva pareri?

[Rely]

Vad ca vrei sa-l faci cu patch. L-ai pus pe ultimul? Incearca prima data sa vezi daca reusesti fara emu. Eu am facut pe Debian in VM pt raspi, pt sh4 si pt Asus WL 500 gpv2(Tomato+optware) , toate cu emu si n-am avut probleme.

[tutri]

Nu am incercat fara patch. Incerc acum.
Si eu sunt cu VM (ubuntu).

---------- Post added at 19:00 ---------- Previous post was at 17:02 ----------

...fara succes

[f11]

Daca nu te descurci , gata muncit un open-wrt cu toate cele inclusiv watchdog pentru oscam ai pe situl asta:http://www.digital-eliteboard.com/33...e-gesucht.html cu download de aici :http://oscamwrt.mooo.com/wrt/testing/ar71xx/.
Eu il folosesc de ceva vreme si raman surprins de stabilitatea pe care o are pe un DIR825 .
Daca te ajuta aici ai oscam compilat :http://oscamwrt.mooo.com/wrt/testing/ar71xx/packages/
Sper sa te ajute si deasemenea sper ca nu am incalcat regulamentu postand link extern.

f11

[Rely]

Am facut eu un bin. Testeaza-l.

[tutri]

f11, mersi de idei/linkuri, le-am epuizat.
Am instalat acele resurse. Nu prea vreau sa instalez imagini neoficiale, mai ales cosmetizate in acest sens.
Am adaugat oscamwrt.mooo.com/..... la lista de pachete din router, am instalat acel oscam, cu acela functioneaza. Dar eu il vreau pe cel compilat de mine.

Relysat, mersi de link, eset smart security blocheaza fileshare, ca fiin nesigur. Ma voi ocupa de el, putin mai tarziu, in cel mai rau caz maine. Cu ce l-ai compilat? simplebuild?

Daca nu voi avea succes, voi ramane la ipk-urile de pe oscamwrt.mooo.com + watchdog.

[tutri]

M-am saturat de Buffalo, i-am dat altceva de lucru, si am scos WDR4300 de la naftalina.
Am instalat openwrt, am pus oscamu, watchdog, etc, dar asta nu vede niciun USB in /dev/

Cititorul il recunoaste:
root@tplink:~# lsusb
Bus 1 Device 1: ID 1d6b:0002 Linux 3.10.49 ehci_hcd EHCI Host Controller
Bus 1 Device 2: ID 05e3:0608
Bus 1 Device 4: ID 0403:6001 Reader Serial gefunden (mouse) == AH01B841

root@tplink:~# dmesg | grep usb
[ 4.620000] usbcore: registered new interface driver usbfs
[ 4.630000] usbcore: registered new interface driver hub
[ 4.630000] usbcore: registered new device driver usb
[ 5.070000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 5.510000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[ 1756.610000] usb 1-1.1: USB disconnect, device number 3
[ 1759.660000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform

si aici incepe distractia:
root@tplink:~# cat /proc/bus/usb/devices
cat: can't open '/proc/bus/usb/devices': No such file or directory

Idei?

---------- Post added at 15:15 ---------- Previous post was at 14:39 ----------

rezolvat instaland kmod-usb-serial-option.