Dezbatere Oscam

[zildan]

Prima data treci l oscam la zi !
Apoi pune oscam cu dvbapi, totul in grupul 1 si la AU pui !.
Daca le pui pe aparat si nu reusesti, cere ajutor din nou si intra careva cu team si te rezolva.
CCcam e MORT ! Doar xemura mai are vise erotice cu el.

[piccolo08]

Uite de asta nu mai putem noi, de el si amicu' lui ala cu planetele.
Hombre ai rezolvat cu oscamul?

[ombre]

Intr-o oarecare masura, in ultima vreme nu prea am avut timp de ea dar a functionat pana acuma cateva zile. azi l-am verificat si nu-mi functiona:

• 2015/03/13 20:27:00 10139A78 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:27:00 10139A78 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:27:02 10139A78 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:27:02 10139A78 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:27:03 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:27:04 10139A78 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:27:04 10139A78 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:27:06 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:27:06 10139A78 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:27:06 10139A78 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:27:06 10139A78 r (reader) focus [internal] Deactivating card
• 2015/03/13 20:27:06 10139A78 r (reader) focus [internal] Error:Sci_Deactivate ioctl(IOCTL_GET_IS_CARD_PRESENT) failed.(9:Bad file descriptor)
• 2015/03/13 20:27:09 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Am repornit de cateva ori oscamul + receiverul, dar nimic.
Mai am un DM600 si am pus cardul inauntru, configurat cu ultima versiune de oscam "r10627" dar tot aceeleasi erori ((
Acuma cateva zile s-a luat curentul de vreo 2 ori, la acel moment nu am bagat deseamna + nici nu m-am uitat la televizor doar azi mi-am dat seamna ca nu functioneaza.
Mai am un receiver Amiko cu conax, maine am sa-l incerc.... nu-mi vine sa cred ca ambele DM600uri sa fi dus... sper ca cartela sa fie. ..


daca scot cardul imi da o eroare asemanatoare:

• 2015/03/13 20:35:45 1013A048 h (reader) focus [internal] Restarting reader
• 2015/03/13 20:35:45 1013A048 h (reader) focus [internal] creating thread for device /dev/sci0
• 2015/03/13 20:35:45 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:45 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:35:47 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:47 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:35:48 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:35:49 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:49 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:35:51 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:35:51 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:51 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:35:53 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:53 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:35:54 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:35:55 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:55 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:35:57 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:35:57 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:57 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:35:59 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:35:59 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:36:00 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:36:01 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:36:01 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:36:03 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/03/13 20:36:03 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:36:03 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:36:05 10140218 r (reader) focus [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
• 2015/03/13 20:36:05 10140218 r (reader) focus [internal] Cannot open device: /dev/sci0
• 2015/03/13 20:36:05 10140218 r (reader) focus [internal] Deactivating card
• 2015/03/13 20:36:05 10140218 r (reader) focus [internal] Error:Sci_Deactivate ioctl(IOCTL_GET_IS_CARD_PRESENT) failed.(9:Bad file descriptor)
• 2015/03/13 20:36:06 1013EBB0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

[virgilius]

Ombre intra prin telnet sau putty pe dream si dai comanda

top

errno=16 mi-a dat si mie acum ceva timp si am constatat ca inaintea oricarui emulator pornea dccamd si cardul nu putea fi citit cu nimic. Daca e pornit dccamd, intra in /usr/bin/ si redenumeste-l, eventual pune-i un 0 in fata numelui. Vezi ca mai e si in /etc/inint.d/ si acolo trebuie redenumit.
Sper sa te ajute asta.

[ombre]

Mersi, pana la urma am rezolvat schimband imaginea in openpli si am pus doar oscamul pe ea....
Maine am sa ma ocup de celalalt reciver cu Gemini 4.70 daca reusesc sa-l configurez la imaginea daca nu atunci zboara impreuna cu cccamul care lucreaza in paralel cu oscamul de pe ea.
Trebuie sa mai scot liniile de cccam si sa le bag in oscam....

sper sa-mi mearga...

[ombre]

Buna ziua,

Incerc sa conectez Oscamul cu un Amiko prin linie newcamd, pt focus imi merge dar pt gigi nu....
Focusul il am local pe serverul ce-l acceseaza, dar nici nu incearca sa acceseze al doilea reader.

oscam.conf

[newcamd]
port = 34000@0B02:000000,15000@1802:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

oscam.server

[reader]
label = linie_externa
protocol = cccam
device = xxxxxxx.tv,12000
user = utilizator
password = parola
inactivitytimeout = 30
group = 2
services = extern
cccversion = 2.0.11
ccckeepalive = 1
cccreshare = 3

oscam.user

[account]
user = usr_focus2
pwd = pass_focus2
uniq = 1
group = 1,2
cccmaxhops = 1
penalty = 0

Focus:

N: 192.168.1.69 34000 usr_focus2 pass_focus2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

GIGI:

N: 192.168.1.69 15000 usr_focus2 pass_focus2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Am incercat pe rand liniile, cel de focus merge dar gigi nu.

[phys]

In log ce iti scrie cand accesezi un program gigi?

[zildan]

@ ombre

Daca inteleg bine vrei sa tragi cu un Amiko (ALI) dintr-un server oscam prin linii N.

Primul sfat ar fi sa pui line C in ALI.

[ombre]

ok, am sa incerc sa-i pun o linie C.

Pt teste am utilizat cele doua dreamuri.

In server am:

oscam.conf

[cccam]
port = 12000
reshare = 1
version = 2.0.11
ccckeepalive = 1

oscam.user

[account]
user = usr_focus
pwd = pass_focus
group = 1,2
cccreshare = 1
cccmaxhops = 5
penalty = 0
ccckeepalive = 1

iar in dreamboxul client am:

oscam.server

[reader]
label = MyDream
protocol = cccam
device = 192.168.1.65,12000
user = usr_focus
password = pass_focus
inactivitytimeout = 30
group = 1,2
cccversion = 2.0.11
ccckeepalive = 1
cccreshare = 1

oscam.user

[account]
user = userdvbapi
description = Dvbapi
au = 1
group = 1,2

oscam.conf

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = userdvbapi
pmt_mode = 1
request_mode = 1

Eroarea pe care o primesc pe dm client:

2015/03/16 20:09:57 10158F38 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1802 ECM_PID: 1036 PROVID: 000000
2015/03/16 20:09:57 10158F38 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1880 ECM_PID: 1037 PROVID: 000000
2015/03/16 20:09:57 10158F38 c (dvbapi) Demuxer 0 found 2 ECMpids and 2 STREAMpids in PMT
2015/03/16 20:09:57 10158F38 c (dvbapi) Demuxer 0 receiver wants to demux srvid 03EB on adapter 0000 camask 0001 index 0001 pmtpid 044F
2015/03/16 20:09:57 10158F38 c (dvbapi) Demuxer 0 new program number: 03EB (1802:03EB unknown) [pmt_list_management 3]
2015/03/16 20:09:57 10158F38 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/03/16 20:10:00 10158F38 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

in exemlul de mai jos protvul din pachetul gigi am vrut sa-l deschid dar nu reusesc....

Focusul local imi deschide! dar ce iau de la alti nu .....

[zildan]

Tot nu i fost clar cine e server si cine e client.

[ombre]

Vreau sa conectez Oscamul (Dreambox) cu un Amiko, mi-ai recomandat sa utilizez protocolul cccam.

Testele le fac cu ajutorul uni alt dreambox (am doua dm600).

Pe unul l-am configurat ca server cccam si are un card focus si cateva linii externe.
Pe celalalt dreambox il utilizez ca si client cccam.

Mie doar cardul focus(local) il pot accesa pe dm client, restul liniilor nu.

[danysev]

deci eu asa am inteles ai doua carduri. unul de digi si unul de focus.

faci inca un user pentru digi si legi prin newcamd sau ccam si fiecare user cu servid-le lor si la fiecare negi sa nu se incurce unu pe altu
exemplu :
[account]
user = user_focus1
pwd = pass
caid = 0B02
monlevel = 4
au = Focussat
allowedprotocols = newcamd
group = 1(la fel are si cardul focus)
services = focussat,!tvr_freesat
ident = 0B02:000000
cacheex = 1 -???

[account]
user = user_tvr
pwd = pass
caid = 0500
monlevel = 4
au = Tvr_HD&Freesat
allowedprotocols = newcamd
group = 2(la fel are si cardul tvr)
services = !focussat,tvr_freesat
ident = 0500:025900
cacheex = 1 - ???

---------- Post added at 01:03 ---------- Previous post was at 00:51 ----------

Da poate nu ai drept de reshare?!

Citeste mai atent Ghidul oscam de pe siteul dezvoltatorului.

[piccolo08]

@danysev
imi spui si mie la ce /cu ce te ajuta parametru asta "cacheex = 1" ?

[danysev]

daca ecm-u mai este in memoria serverului intai va lua din cache apoi va lua din card(depinde de timpul setat).asta se intampla cand 2 useri, compatibili cache-ex, sunt pe acelasi canal .ajuta la stabilitatea serverului si reduce nok

[piccolo08]

Nu vreau sa par "a toate stiutor" dar cred ca te-ai bagat in config precum magaru'n ceata.
Fa putin o vizita aici si informeaza-te corect. V-am to spus fratilor , CITITI si mai lasati etnobotanicele, ca nu ajuta la nimic.