Results 1 to 15 of 154

Thread: Dezbatere Oscam

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Golden Member piccolo08's Avatar
    Join Date
    02 Sep 2010
    Location
    Earth
    Posts
    450
    Mentioned
    2 Post(s)
    Rep Power
    62

    Thumbs up

    INTERNAL REEADERSIf you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.
    The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.
    For models with PPC cpu use cardmhz = 3150, for models with MIPS cpu use cardmhz = 2700. Exception is the DM7058, you should use cardmhz = 8300.
    E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If
    you want to clock the card ok just use cardmhz = 2700 an mhz = 500.If you want to overclock it use cardmhz = 2700 and mhz = 900.
    Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!
    Keep in mind mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.
    Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!

    In rosu si mov pentru tine. Era scris in "uichi" nu ai descoperit nimic nou http://www.streamboard.tv/wiki/OSCam...server#cardmhz
    In albastru pentru cei ce au readere interne pe PC-uri!


    TEST
    PC: Fujitsu Siemens F400 Proc: 1GHz, RAM:512MB DDRII
    SO:debian 7.2.x
    Reader: Smargo Argolis v 1.3 setari default.
    Oscam version: r9478

    [oscam.server]
    Device: /dev/ttyUSBx
    Lasat default: Card Mhz: 369
    Pus manual MHZ:1000
    Smargopatch pe enable.
    Autospeed pe zero.
    Dupa reboot la PC isi aloca singur valorile de mai jos. isi reconsidera valoarea de "1000" si o rearanjeaja la o valoare mai mica cu toate ca autospeed e disable.


    Timpi obtinuti:
    debian(filtered): [LOG060]2014/02/01 20:11:46 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (130 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG087]2014/02/01 20:11:56 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (130 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG101]2014/02/01 20:12:06 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (137 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG120]2014/02/01 20:12:16 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (131 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG151]2014/02/01 20:12:26 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (134 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG170]2014/02/01 20:12:36 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (128 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG185]2014/02/01 20:12:46 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (131 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG213]2014/02/01 20:12:56 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (130 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG230]2014/02/01 20:13:06 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (133 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG241]2014/02/01 20:13:16 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (131 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG260]2014/02/01 20:13:26 9F78DB8 c au-focus (0B02&000000/76C6/4C): found (131 ms) by Focussat - Prima TV (cwc OK)

    flucctuatie de 9ms

    smargo patch si gpio ambele pe enable:

    debian(filtered): [LOG061]2014/02/01 20:31:36 B505C2D8 c au-focus (0B02&000000/76C6/4C): found (130 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG080]2014/02/01 20:31:46 B505C2D8 c au-focus (0B02&000000/76C6/4C): found (130 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG104]2014/02/01 20:31:56 B505C2D8 c au-focus (0B02&000000/76C6/4C): found (131 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG116]2014/02/01 20:32:06 B505C2D8 c au-focus (0B02&000000/76C6/4C): found (131 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG133]2014/02/01 20:32:16 B505C2D8 c au-focus (0B02&000000/76C6/4C): found (132 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG148]2014/02/01 20:32:26 B505C2D8 c au-focus (0B02&000000/76C6/4C): found (131 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG168]2014/02/01 20:32:36 B505C2D8 c au-focus (0B02&000000/76C6/4C): found (130 ms) by Focussat - Prima TV (cwc OK)

    fluctuatie de 2ms
    Last edited by piccolo08; 02-02-14 at 00:54.
    DM 800se sim 2.10 , Ibox-cloud, raspberry pi si alte rahaturi

  2. #2
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    8,978
    Mentioned
    115 Post(s)
    Rep Power
    100

    Default

    Ideea e sa ne ajutam reciproc.
    Puneti convietuirea inaintea ambitiilor personale.
    Sh40, AML, prime focus 1,5m si altele ...

  3. #3
    Golden Member piccolo08's Avatar
    Join Date
    02 Sep 2010
    Location
    Earth
    Posts
    450
    Mentioned
    2 Post(s)
    Rep Power
    62

    Thumbs up

    Evident ca trebuie sa convetuim.
    Eu am facut un test paralel pe un singur card si pe 10 ECM si am prezentat setarile mele.
    Setarea universala nu exista. Sunt multi factori in joc:


    • Hardware
    • software
    • cititor de card


    Posibil ca la un dm800 cu imagine gemini si altul cu imagine sifteam sa fie diferente mari.
    Numai TU ca user DECIZI ce e mai bun pentru tine.
    Poate smargo pe debian e mai bun decat pe ubuntu, sau invers.
    Poate versiunea 1.7 de soft e mai buna...sau 1.3

    Ajutorul nu inseamna doar COPY/PASTE ci si munca individuala.
    Am continuat sa testez pe acelasi sitem.
    Am bifat optiunea autospeed si dupa restart am obtinut acesti parametri.




    smargo patch gpio active ambele:

    debian(filtered): [LOG114]2014/02/01 22:59:56 B4E13770 c au-focus (0B02&000000/76C6/4C): found (166 ms) by Focussat - Prima TV (cwc LEARN)debian(filtered): [LOG138]2014/02/01 23:00:06 B4E13770 c au-focus (0B02&000000/76C6/4C): found (165 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG186]2014/02/01 23:00:16 B4E13770 c au-focus (0B02&000000/76C6/4C): found (179 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG240]2014/02/01 23:00:26 B4E13770 c au-focus (0B02&000000/76C6/4C): found (165 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG260]2014/02/01 23:00:36 B4E13770 c au-focus (0B02&000000/76C6/4C): found (165 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG294]2014/02/01 23:00:46 B4E13770 c au-focus (0B02&000000/76C6/4C): found (165 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG313]2014/02/01 23:00:56 B4E13770 c au-focus (0B02&000000/76C6/4C): found (166 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG335]2014/02/01 23:01:06 B4E13770 c au-focus (0B02&000000/76C6/4C): found (166 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG361]2014/02/01 23:01:16 B4E13770 c au-focus (0B02&000000/76C6/4C): found (166 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG383]2014/02/01 23:01:26 B4E13770 c au-focus (0B02&000000/76C6/4C): found (171 ms) by Focussat - Prima TV (cwc OK)

    Fara gpio si smargopatch:
    by Focussat - Prima TV (cwc LEARN)debian(filtered): [LOG102]2014/02/01 23:15:26 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (166 ms) by Focussat - Prima TV (cwc LEARN)
    debian(filtered): [LOG127]2014/02/01 23:15:36 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (173 ms) by Focussat - Prima TV (cwc LEARN)
    debian(filtered): [LOG153]2014/02/01 23:15:46 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (167 ms) by Focussat - Prima TV (cwc LEARN)
    debian(filtered): [LOG179]2014/02/01 23:15:56 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (165 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG227]2014/02/01 23:16:06 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (169 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG263]2014/02/01 23:16:16 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (166 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG282]2014/02/01 23:16:26 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (167 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG322]2014/02/01 23:16:36 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (174 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG339]2014/02/01 23:16:46 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (167 ms) by Focussat - Prima TV (cwc OK)
    debian(filtered): [LOG359]2014/02/01 23:16:56 98FB2B8 c au-focus (0B02&000000/76C6/4C): found (164 ms) by Focussat - Prima TV (cwc OK)
    Tinand cont de mai multi factori care pot interveni pot face un mic calcul:

    TravellTime+CardTime+DelayTime=900-930ms In cazul meu cardul local poate oferi un DCW "curat" intr-un timp de maxim de 930ms, luand in calcul o retea proasta ADSL cu un TT de 400ms
    Pentru un user normal este un timp excelent fara a "PRAJI" cardul pentru a obtine un timp cu pana la 60ms mai jos.
    Garantat ca va avea o vizionare absolut normala a canalului respectiv. Cine doreste poate testa pe propriul card si apoi sa decida pentru el in ce fel de configuratie va opta sa ramana.
    Last edited by piccolo08; 02-02-14 at 01:39.
    DM 800se sim 2.10 , Ibox-cloud, raspberry pi si alte rahaturi

  4. #4
    Standard RSP member
    Join Date
    27 May 2010
    Posts
    46
    Mentioned
    0 Post(s)
    Rep Power
    58

    Default

    fiecare face setari personale asai?

  5. #5
    Golden Member piccolo08's Avatar
    Join Date
    02 Sep 2010
    Location
    Earth
    Posts
    450
    Mentioned
    2 Post(s)
    Rep Power
    62

    Default

    Oscam scrie in automatic doar setarile de default care pe noi nu ne ajuta cu nimic.
    Oscam nu poate sa ghiceasca daca avem card sau nu. Nu poate ghici daca avem cardul in cititorul intern, extern sau pe seriala.
    Trebuie sa-i spunem noi ce avem, asta inseamna a seta singuri.
    Odata cu schimbarile intervenite in versiunile noi de oscam vechile configuratii copiate de la amici sau de pe forumuri nu prea mai sunt de actualitate.
    Postati aici configuratia facuta doar in caz ca aveti probleme cu recunoasterea cardului.
    DM 800se sim 2.10 , Ibox-cloud, raspberry pi si alte rahaturi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •