Argolis Triple-Reader si OSCam

[Znuff]

Doar un anunț general pentru cine e tentat să cumpere așa ceva: nu o faceți.

Am avut unul săptămana trecută, am incercat să pun un card 1880 și un 0B02.

1880 nu a vrut deloc, nici mort. 0B02 a mers aproximativ o oră.

Am incercat in mod mouse, smargo, smartreader. De vină ar fi "o problemă de timing" (conform celor de pe streamboard) ceea ce rezultă in a nu fi posibilă setarea frecvenței cardului - o problemă majoră a cardurilor 1880 fiind că nu merg inițializate in OSCam cu un reader Smargo decat la 6 /8 /10 MHz.

Stați departe de ele momentan :-)

[ovidiumarius]

Se vorbeste de multa vreme de asa ceva, eu il am de aproape un an si il tin in cutie.
Cel mai prost cititor construit vreodata asta pentru ca cei ce il fac (argolis) nu dezvolta nici un soft pentru el.
Cei de la streamboard incearca tot felul de patch-uri pentru el dar rezultatele nu prea sunt cele dorite.

http://www.streamboard.tv/wbb2/threa...tuser=0&page=1

Asta fiind raspunsul celor de la argolis :

Dear XXXX,
 

Together with the developers we are working on the triplereader in oscam - we have quite good results - now all 3 readers are recognized and we have init on them (ATR is read) - here you can read about our progress:
http://www.streamboard.tv/oscam/ticket/2470
Code for oscam "smartreader" mode is here:
http://www.streamboard.tv/oscam/browser/trunk/csctapi/ifd_smartreader.c

 
On cccam it works fine. For exact settings and details please visit http://openpli.org/forums/topic/23492-fyi-the-argolis-%C2%AE-triple-reader-config/page__hl__%2Btriple+%2Breader.
 

Kind regards

Argolis


Pascal

[zulea]

Ar fi cineva interesat de un smartcard reader cu 4 cititoare de carduri compatibil USB PCSC (CCID), cu posibilitati multiple de setari (ex. frecventa card, baudrate, ...), eventual chiar si cu un GPL (open source) pe firmware din microcontroller?
Ex: pot produce asa ceva cu un pret undeva pina in 15-20 EUR daca vor fi destui doritori (sa zicem peste 500).
Si nu glumesc pentru ca sunt dezvoltator si producator la urmatoarele produse (din domeniul GSM):
http://www.mx-key.com (aici au fost produse peste 100.000 bucati)
http://www.xtc.tw (aici au fost produse ~25.000 bucati)
... ar mai fi citeva ...

Pentru inceput sunt dispus sa "sponsorizez" inceputul (productie de sample hardware, dezvoltarea de firmware, ...)
Asta in cazul in care mai gasesc citiva oameni dispusi sa faca teste cu acest reader.

[zildan]

Cred ca asta trebuie sa treaca pe privat deja.

[lao]

La pretul acesta, daca merge bine trebuie sa existe amatori.
Desi nu-s multi cei ce au 4 carti, Dar e bun si pentru cei cu 2-3 carti.
Pe mine ma intereseaza, daca e, pot testa pe vreo 5 norme de codare.

[qwess]

Se mai aude ceva de acest 3reader cu un 1880?
Am testat astazi la cineva un triple cu 0B02 si 1880 pe o masina x86, pe smargo si mouse initializeaza decat focus in schimb pe smartreader
(TripleP1/TripleP2 Serial:xxxxxxx) le initializeaza pe ambele insa imediat dupa initializare da card ejected!!!

dmesg: pe smartreader lasa decat portul 3 in ttyUSB2, usb0 si usb1 deconecteaza si le trece pe libusb, dupa initializare carduri le reconecteaza in tty.
Nu am avut timp de teste pe alte revizii, daca reusesc ceva anunt.

[qwess]

Mai mult de atat nu vrea...
dupa initializare(peste 10 Mhz) in smartreader:ejected card,

2013/08/28 16:25:40 8577D48 r Found reader with serial 000006ff at 002:003
2013/08/28 16:25:40 8577D48 r Found smartreader device Serial:000006ff
2013/08/28 16:25:40 8577D48 r digi_1880 [smartreader] Reader initialized (device=TripleP1;Serial:000006ff, detect=cd, mhz=1200, cardmhz=369)
2013/08/28 16:25:40 8576198 r focussat [mouse] Reader initialized (device=/dev/Triple0001, detect=cd, mhz=480, cardmhz=357)
2013/08/28 16:25:41 8577D48 r digi_1880 [smartreader] card detected
2013/08/28 16:25:41 8576198 r focussat [mouse] card detected
2013/08/28 16:25:42 8576198 r focussat [mouse] ATR: 3B 24 00 30 42 30 30
2013/08/28 16:25:42 8576198 r focussat [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
2013/08/28 16:25:42 8576198 r focussat [mouse] Setting baudrate to 9600 bps
2013/08/28 16:25:42 8576198 r focussat [mouse] Calculated work ETU is 77.50 us
2013/08/28 16:25:42 8576198 r focussat [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 4.80 Mhz (specified in reader->mhz)
2013/08/28 16:25:43 8576198 r focussat [mouse] type: Conax, caid: 0B02, serial: ##########, hex serial: ########, card: v64
2013/08/28 16:25:43 8576198 r focussat [mouse] Providers: 1
2013/08/28 16:25:43 8576198 r focussat [mouse] Provider: 1 Provider-Id: 000000
2013/08/28 16:25:43 8576198 r focussat [mouse] Provider: 1 SharedAddress: 002B8CCD
2013/08/28 16:25:43 8576198 r focussat [mouse] found card system conax
2013/08/28 16:25:43 8576198 r focussat [conax] Package: 1, id: 1010, classes: 01000000, date: 2013/06/01 - 2013/06/30, name: FocusSat
2013/08/28 16:25:43 8576198 r focussat [conax] Package: 2, id: 1010, classes: 01E1DD7F, date: 2013/05/01 - 2013/05/31, name: FocusSat
2013/08/28 16:25:43 8576198 r focussat [conax] Package: 3, id: 2010, classes: 01000000, date: 2013/06/01 - 2013/06/30, name: ESS
2013/08/28 16:25:43 8576198 r focussat [conax] Package: 4, id: 2010, classes: 01001171, date: 2013/05/01 - 2013/05/31, name: ESS
2013/08/28 16:25:43 8576198 r focussat [conax] ready for requests
2013/08/28 16:25:44 8577D48 r digi_1880 [smartreader] Error activating card.
2013/08/28 16:25:52 0 --- Skipped 1 duplicated log lines ---
2013/08/28 16:25:52 8577D48 r digi_1880 [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/08/28 16:25:52 8577D48 r digi_1880 [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/08/28 16:25:52 8577D48 r digi_1880 [smartreader] Calculated work ETU is 2.67 us
2013/08/28 16:25:52 8577D48 r digi_1880 [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 12.00 Mhz (specified in reader->mhz)
2013/08/28 16:25:53 8577D48 r digi_1880 [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/08/28 16:25:54 8577D48 r digi_1880 [smartreader] detect native nagra card
2013/08/28 16:25:55 8577D48 r digi_1880 [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/08/28 16:25:56 8577D48 r digi_1880 [smartreader] T1 Resync command error, trying to reactivate!
2013/08/28 16:25:59 8577D48 r digi_1880 [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/08/28 16:25:59 8577D48 r digi_1880 [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/08/28 16:25:59 8577D48 r digi_1880 [smartreader] Calculated work ETU is 2.67 us
2013/08/28 16:25:59 8577D48 r digi_1880 [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 12.00 Mhz (specified in reader->mhz)
2013/08/28 16:25:59 8577D48 r digi_1880 [smartreader] Card responded ok for ifsd request of 28
2013/08/28 16:26:01 8577D48 r digi_1880 [smartreader] found card system nagra
2013/08/28 16:26:01 8577D48 r digi_1880 [nagra] ROM: D N A S P 1 8 0
2013/08/28 16:26:01 8577D48 r digi_1880 [nagra] REV: M e r 0 0 0
2013/08/28 16:26:01 8577D48 r digi_1880 [nagra] SER: ############
2013/08/28 16:26:01 8577D48 r digi_1880 [nagra] CAID: 1880
2013/08/28 16:26:01 8577D48 r digi_1880 [nagra] Prv.ID: 00 00 20 11 (sysid)
2013/08/28 16:26:01 8577D48 r digi_1880 [nagra] Prv.ID: 00 00 00 00
2013/08/28 16:26:02 8577D48 r digi_1880 [nagra] IRD ID: ############
2013/08/28 16:26:02 8577D48 r digi_1880 [nagra] active to: 2013/09/28 04:12
2013/08/28 16:26:02 8577D48 r digi_1880 [nagra] -----------------------------------------
2013/08/28 16:26:02 8577D48 r digi_1880 [nagra] |id |tier |valid from |valid to |
2013/08/28 16:26:02 8577D48 r digi_1880 [nagra] +----+--------+------------+------------+
2013/08/28 16:26:02 8577D48 r digi_1880 [nagra] |2111|0040 |2013/03/28 |2013/09/28 |
2013/08/28 16:26:02 8577D48 r digi_1880 [nagra] |2111|0065 |2013/05/16 |2013/09/28 |
2013/08/28 16:26:03 8577D48 r digi_1880 [nagra] |2111|0083 |2013/01/01 |2013/06/27 |
2013/08/28 16:26:03 8577D48 r digi_1880 [nagra] -----------------------------------------
2013/08/28 16:26:03 8577D48 r digi_1880 [nagra] ready for requests
2013/08/28 16:26:04 8577D48 r digi_1880 [nagra] card ejected

[ovidiumarius]

# File: /etc/udev/rules.d/45-smargo-reader.rules
############################## smargo tripple ###########################
SUBSYSTEMS=="usb", ATTRS{interface}=="Triple Reader+", ATTRS{../serial}=="12345678", ATTRS{bInterfaceNumber}=="01", SYMLINK+="sc/my-special-card", GOTO="smargo_tripple_end"
SUBSYSTEMS=="usb", ATTRS{interface}=="Triple Reader+", SYMLINK+="sc/triple-$attr{../serial}-$attr{bInterfaceNumber}"
LABEL="smargo_tripple_end"
############################## smargo stick ##############################
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader 1234567", SYMLINK+="sc/my-very-important-card"

Din cate se pare ar fi singura varianta functionala cat de cat.