Smart TV

[tutri]

Eu zic ca va functiona, dar cu micile mari bube prezentate mai sus.

[zildan]

CAM-ul Diablo il am la Bucuresti si televizorul din seria LM620S la CRAIOVA.
O sa iau camu cu mine cand stau cateva zile la Craiova.
Cu Matrix AIR merge doar pe HD-uri si usor instabil.
O sa incerc sa il fac doar emu din key si pe asta, acum e cu oscam pe linii.

[qwess]

F8000(F.1113) + samyGOoscam r9502 libusb + smartreader

1970/01/01 02:00:25 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9502 (arm-v7a8v3r1-linux-gnueabi-libusb-static-test)
1970/01/01 02:00:25 0 s creating pidfile /dtv/oscam.pid with pid 1184
1970/01/01 02:00:25 0 s The current system time is smaller than the build date (Feb 6 2014). Waiting up to 60 seconds for time to correct
1970/01/01 02:01:26 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
1970/01/01 02:01:26 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
1970/01/01 02:01:26 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
1970/01/01 02:01:26 0 s signal handling initialized
1970/01/01 02:01:26 0 s 14 service-id's loaded in 1ms
1970/01/01 02:01:26 0 s 385 provid's loaded
1970/01/01 02:01:26 0 s 1 entries read from oscam.whitelist
1970/01/01 02:01:26 0 s monitor: initialized
1970/01/01 02:01:26 0 s cccam: initialized
1970/01/01 02:01:26 0 s Binary without Irdeto module - no EMM processing for Irdeto possible!
1970/01/01 02:01:26 0 s Binary without Conax module - no EMM processing for Conax possible!
1970/01/01 02:01:26 0 s Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
1970/01/01 02:01:26 0 s Binary without Seca module - no EMM processing for Seca possible!
1970/01/01 02:01:26 0 s Binary without Viaccess module - no EMM processing for Viaccess possible!
1970/01/01 02:01:26 0 s Binary without NDS Videoguard module - no EMM processing for NDS Videoguard possible!
1970/01/01 02:01:26 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
1970/01/01 02:01:26 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
1970/01/01 02:01:26 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
1970/01/01 02:01:26 0 s Binary without Griffin module - no EMM processing for Griffin possible!
1970/01/01 02:01:26 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
1970/01/01 02:01:26 A60B10 r Found smartreader device Serial:Reader 221
1970/01/01 02:01:26 A60B10 r digi_smargo [smartreader] Creating smartreader thread.
1970/01/01 02:01:26 A60B10 r digi_smargo [smartreader] clocking for smartreader with smartreader protocol
1970/01/01 02:01:26 A60B10 r digi_smargo [smartreader] Reader initialized (device=Serial:Reader 221, detect=cd, mhz= AUTO, cardmhz=343)
1970/01/01 02:01:38 A60B10 r digi_smargo [smartreader] card detected
1970/01/01 02:01:38 A60B10 r digi_smargo [smartreader] init card at 369 mhz
1970/01/01 02:01:43 A60B10 r digi_smargo [smartreader] ATR:
1970/01/01 02:01:43 A60B10 r digi_smargo [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
1970/01/01 02:01:43 A60B10 r digi_smargo [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
1970/01/01 02:01:43 A60B10 r digi_smargo [smartreader] autospeed = 1
1970/01/01 02:01:43 A60B10 r digi_smargo [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
1970/01/01 02:01:43 A60B10 r digi_smargo [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
1970/01/01 02:01:43 A60B10 r digi_smargo [smartreader] Card responded ok for ifsd request of 251
1970/01/01 02:01:44 A60B10 r digi_smargo [smartreader] detect native nagra card
1970/01/01 02:01:45 A60B10 r digi_smargo [smartreader] found card system nagra
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] ROM: D N A S P 1 4 2
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] REV: R e v G 0 6
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] SER: ############
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] CAID: 1802
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] Prv.ID: 00 00 20 11 (sysid)
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] Prv.ID: 00 00 00 00
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] IRD ID: ############
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] active to: 2014/03/01 11:59
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] -----------------------------------------
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |id |tier |valid from |valid to |
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] +----+--------+------------+------------+
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |2111|121A |2013/07/01 |2014/03/01 |
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |2111|0083 |2013/07/01 |2014/03/01 |
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |2111|2449 |2013/07/01 |2014/03/01 |
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |2111|244A |2013/07/01 |2014/03/01 |
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |2111|F639 |2013/07/01 |2014/03/01 |
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |2111|0067 |2013/07/01 |2014/03/01 |
1970/01/01 02:01:45 A60B10 r digi_smargo [nagra] |2111|244B |2013/07/01 |2014/03/01 |
1970/01/01 02:01:46 A60B10 r digi_smargo [nagra] |2111|2448 |2013/07/01 |2014/03/01 |
1970/01/01 02:01:46 A60B10 r digi_smargo [nagra] |2111|0040 |2013/07/01 |2014/03/01 |
1970/01/01 02:01:46 A60B10 r digi_smargo [nagra] |2111|0065 |2013/07/01 |2014/03/01 |
1970/01/01 02:01:46 A60B10 r digi_smargo [nagra] -----------------------------------------
1970/01/01 02:01:46 A60B10 r digi_smargo [nagra] ready for requests
1970/01/01 02:01:48 A68378 c dvbapi (1802&000000/0000/0550/92:B6054947280C59B73C79699DD0795C69): found (319 ms) by digi_smargo (P/3/3/3)

[tutri]

WOW!
Sper sa apara si pentru LG, ceva.

[qwess]

tvr merge si el

>> OSCam <<  cardserver started at Fri Feb  7 16:39:02 2014
-------------------------------------------------------------------------------
2014/02/07  16:39:02        0 s >> OSCam <<  cardserver started,  version 1.20-unstable_svn, build r9509  (arm-v7a8v3r1-linux-gnueabi-libusb-static-test01)
2014/02/07 16:39:02        0 s creating pidfile /dtv/oscam.pid with pid 2526
2014/02/07 16:39:02        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/02/07 16:39:02        0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/02/07 16:39:03        0 s signal handling initialized
2014/02/07 16:39:03        0 s 14 service-id's loaded in 0ms
2014/02/07 16:39:03        0 s 385 provid's loaded
2014/02/07 16:39:03        0 s 1 entries read from oscam.whitelist
2014/02/07 16:39:03        0 s monitor: initialized (fd=4, )
2014/02/07 16:39:03        0 s cccam: initialized (fd=5, )
2014/02/07 16:39:03        0 s local [smartreader] creating thread for device Serial:Reader 221
2014/02/07 16:39:03   A6ACE0 r local [smartreader] De SR_init
2014/02/07 16:39:03   A6ACE0 r local [smartreader] initing smargo type SR
2014/02/07 16:39:03   A6ACE0 r local [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/02/07 16:39:03        0 s anti cascading disabled
2014/02/07 16:39:03   A6F9E0 c plain dvbapi-client granted (dvbapi, au=auto (5 reader))
2014/02/07 16:39:03   A6F9E0 c Using SamyGO dvbapi v0.1 (c) bugficks 2013
2014/02/07 16:39:03   A4D3B0 h webif: decompressed 71555 bytes back into 197848 bytes
2014/02/07 16:39:03   A6F9E0 c [DVBAPI] PMT6: Trying connect to enigma CA PMT listen socket...
2014/02/07 16:39:03   A4D3B0 h HTTP Server running.
2014/02/07 16:39:03   A6F9E0 c [DVBAPI] PMT6 CA PMT Server connected on fd 13!
2014/02/07 16:39:03   A6ACE0 r Found reader with serial Reader 221 at 001:005
2014/02/07 16:39:03   A6ACE0 r Found smartreader device Serial:Reader 221
2014/02/07 16:39:03   A6ACE0 r local [smartreader] Creating smartreader thread.
2014/02/07 16:39:03   A6ACE0 r local [smartreader] clocking for smartreader with smartreader protocol
2014/02/07  16:39:03   A6ACE0 r local [smartreader] Reader initialized  (device=Serial:Reader 221, detect=cd, mhz= AUTO, cardmhz=343)
2014/02/07 16:39:04   A6ACE0 r local [smartreader] card detected
2014/02/07 16:39:04   A6ACE0 r local [smartreader]  init card at 369 mhz
2014/02/07 16:39:07   A6ACE0 r local [smartreader] ATR: 3F 77 18 00 00 C2 14 00 C1 68 90 00 
2014/02/07 16:39:08   A6ACE0 r local [smartreader] Init card protocol T0, FI=1, F=372, D=12, N=0
2014/02/07 16:39:08   A6ACE0 r local [smartreader] Calculated work ETU is 5.81 us reader mhz = 534
2014/02/07 16:39:08   A6ACE0 r local [smartreader] autospeed = 1
2014/02/07 16:39:08   A6ACE0 r local [smartreader] Effective reader settings mhz =534 F= 372 D= 12 N=0 T=0 inv=1 parity=ODD
2014/02/07  16:39:08   A6ACE0 r local [smartreader] ATR Fsmax is 5 MHz, clocking  card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in  reader->mhz)
2014/02/07 16:39:09   A6ACE0 r local [smartreader] type: Viaccess (standard atr), caid: 0500, serial: ##########
2014/02/07 16:39:10   A6ACE0 r local [smartreader] providers: 3 (FFF720,025900,025910)
2014/02/07 16:39:10   A6ACE0 r local [smartreader] ready for requests
2014/02/07 16:39:10   A6ACE0 r local [smartreader] found card system viaccess
2014/02/07 16:39:10   A6ACE0 r local [viaccess] THIS WAS A SUCCESFULL START ATTEMPT No  1 out of max alloted of 1
2014/02/07 16:39:10   A6ACE0 r local [viaccess] card detected
2014/02/07 16:39:10   A6ACE0 r local [viaccess] serial: ##########
2014/02/07 16:39:10   A6ACE0 r local [viaccess] provider: 1, id: #################, sa: ########, geo: empty
2014/02/07 16:39:10   A6ACE0 r local [viaccess] provider: 2, id: ###################, sa: ########, geo: FF FF FF FF 
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2013/10/24 - 2014/10/22
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2013/02/26 - 2013/10/23
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2012/09/27 - 2013/03/27
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2012/03/23 - 2012/09/26
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2011/09/28 - 2012/03/28
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2011/09/19 - 2012/03/28
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2011/02/08 - 2011/09/28
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2010/08/18 - 2011/02/23
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: 0A, expiry date: 2010/03/27 - 2010/08/26
2014/02/07 16:39:10   A6ACE0 r local [viaccess] class: FF, expiry date: 2010/02/18 - 2010/03/19
2014/02/07 16:39:11   A6ACE0 r local [viaccess] provider: 3, id: ###################, sa: ########, geo: FF FF FF FF

[qwess]

Samsung SmartView

Watch TV on Windows 7/8 devices
keyvisual.png

Samsung SmartView App is a companion app for Samsung Smart TV. You can watch TV content on your mobile devices and you can also control TV and TV connected devices(STB, BDP, HTS).
TV connected devices are needed to be registered on TV to control the devices.
Enjoy TV content on your mobile devices with Samsung SmartView App!

※ To use this application, TV and mobile device should be connected within the same network(AP).


[Key Features]
- Remote Control
. Control TV and connected devices that are registered on TV(STB, BDP, HTS).
. Qwerty Keyboard is supported when you need to type on TV.

- TV View
. You can watch the same content with TV or different content from other input source on your mobile devices.
※ Watching different content from other source is not supported for LED F7000/PDP F8000 below models.
※ View feature is not supported for HDMI source content and some broadcasting content due to Content Protection Rule.


[Supported Devices]
- TV
1. Remote Control
. 2012, 2013 Samsung Smart TV models

2. TV View
. 2012 Samsung TV LED ES7500 and above, PDP E8000 and above
. 2013 Samsung TV LED F4500 and above Smart TV (except F9000 and above), PDP F5500 and above Smart TV

[How to use]
1. Connect TV to the network within your house. (menu - network setting)
2. Connect Mobile device to the same network with TV.
3. Start Samsung Smart View App.
4. If more than one devices are connected on the same network, choose the TV that you want to connect.
(if there is only one TV is connected on the network, App will automatically connect the TV)

http://www.samsung.com/global/smartview/english/

[EsTeTicu]

Am si eu pe un LG 42LA6608 un diablo cam wifi 2.6, cu underworld 2.28, legat de un oscam 1.20 r9540 cu card local 1880 digi pus pe un rooter linksys E3200.

Combinatia merge relativ ok, timp mediu 430ms, nu intrerupe niciodata.

Problema e aparent la diablo, e foarte instabil cu wireless-ul, uneori pierde reteaua, aparent nu trimite EMM deloc (nici pe cccam nici pe newcamd) si se incalzeste destul de tare.




As vrea sa incerc Matrix Cam Air, poate combinatia oscam dvbapi e mai fericita si poate face si AU. Cum se comporta pe aceste LG-uri si pe wireless?