Router TP-Link TL-WR1043ND cu Oscam

**badeaghio** · 21-11-12, 17:22

incearca si cu alt build, gasisem la un moment dat pe un site cateva zeci de pagini cu build-uri pentru modelul asta, daca dau de el il pun aici

**lao** · 23-11-12, 09:45

Am pus ddwrt, cu asta nu m-am inteles... nu ma lasa sa scriu, oscam tot la fel face... de abia am scapat de el ca nu ma lasa sa schimb firmu'.
De abia am pus unul original si apoi back to openwrt.
Daca mai ai oscamu' ala care ti-a pornit l-as vrea si eu ca nu-mi dau seama ce e de vina de nu porneste. Bin sau ceva lipsa in sistem...

**lao** · 27-11-12, 20:06

Am mai frecat DDWRT dar degeaba, e imposibil. Din interfata faci setari dar din consola... e jale.
Asa ca ma inteleg de minune cu openwrt.

Router ModelTP-LINK TL-WR1043ND
Firmware Version OpenWrt Backfire 10.03.1 / LuCI 0.10.0 Release (0.10.0)
Kernel Version2.6.32.27

Am gasit un oscam vechi
oscam_1.00-r5542-1_ar71xx
care merge, dar nu pot pune unul mai proaspat ca nu stiu ce toolchain trebuie.
Tot ce am compilat nu merge:
"OPENWRT_2.4" "OPENWRT_2.6" "TPLink_1043ND" "DDWRT_3.4.6" "DDWRT_4.1.0"
In oscamul asta scrie:

version 1.00-unstable_svn, build #5542 (mips-wrt54g-linux)

Stie cineva ce toolchain e asta (mips-wrt54g-linux)?

---------- Post added at 19:06 ---------- Previous post was at 17:32 ----------

Am incercat sa compilez cu "vechiul" easybuild, cu toolchain OpenWrt-SDK-ar71xx si e ok.
Dar am renuntat la easybuild tocmai ca nu reusesc sa-l setez total, imi compileaza, in cazul acesta, fara suport smargo.
Asa ca acum o sa incerc sa inlocuiesc toolchain din simplebuild cu cel din easybuild

**mirel** · 27-11-12, 21:35

eu am incercat o gramada de svn-uri cu simplebuild, chiar am schimbat si toolchainul, dar degeaba..se pare ca simplebuild are o problema cu compilatul tplinkului...
in schimb merge bine compilat cu EasyBuildScript .. te chinui un pic la configurat...dar merge..nu o sa ai probleme cu "Segmentation fault"

uite ai aici:

Code:

OSCam ver: 1.20-unstable_svn rev: 7942 target: mips-openwrt-linux-uclibc
| Tools:
|  CROSS    = mips-openwrt-linux-uclibc-
|  CC       = mips-openwrt-linux-uclibc-gcc
|  STRIP    = mips-openwrt-linux-uclibc-strip
| Settings:
|  CONF_DIR = /usr/local/etc
|  CC_OPTS  = -O2 -ggdb -ffunction-sections -fdata-sections
|  CC_WARN  = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
|  CFLAGS   = -I/home/nou/oscam-svn/external_LIBS/TPLINK/include
|  LDFLAGS  = -Wl,--gc-sections -L/home/nou/oscam-svn/external_LIBS/TPLINK/lib -I/home/nou/oscam-svn/external_LIBS/TPLINK/include
|  LIBS     = -lcrypto -lpthread -ldl
| Config:
|  Addons   : WEBIF TOUCH IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SERIAL CONSTCW PANDORA
|  Readers  : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT
|  CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI
|  Compiler : mips-openwrt-linux-uclibc-gcc (GCC) 4.3.3
|  Linker   : GNU ld (GNU Binutils) 2.19.1
|  Binary   : Distribution/oscam-1.20-unstable_svn7942-mips-openwrt-linux-uclibc
+-------------------------------------------------------------------------------

l-am pus aici

**lao** · 27-11-12, 21:57

Pe mine nu ma lasa sa salvez ce configurez, le ia pe urma default. Si folosesc oscam compilat numai cu ce trebuie, am eu pitici pe creier sa nu contina:

DRE TONGFANG BULCRYPT

si tot felu' de balarii...

Ii dau eu de cap pana la urma...

**mirel** · 28-11-12, 00:06

Code:

| Config:
|  Addons   : WEBIF WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX
|  Protocols: NEWCAMD CCCAM CCCSHARE
|  Readers  : NAGRA CONAX VIACCESS
|  CardRdrs : PHOENIX MP35 SMARGO
|  Compiler : mips-openwrt-linux-uclibc-gcc (GCC) 4.3.3
|  Linker   : GNU ld (GNU Binutils) 2.19.1
|  Binary   : Distribution/oscam-1.20-unstable_svn7942

aici

**lao** · 28-11-12, 00:47

Nici asta nu-mi vede smargourile, raman deocamdata cu build #5542 (mips-wrt54g-linux)
Oricum, vechitura asta merge neasteptat de bine.
Si mai sapam...

**fery21** · 28-11-12, 06:40

Poti compara cu fritzbox la oscam si la instalarea de pcsc.

**mirel** · 28-11-12, 21:47

...cu dedicatie!

Code:

+-------------------------------------------------------------------------------
| OSCam ver: 1.20-unstable_svn rev: 7942 target: mipsel-linux-uclibc-libusb
| Tools:
|  CROSS    = /opt/cross/mipsel/4.1.0-uclibc-0.9.28/bin/mipsel-linux-uclibc-
|  CC       = /opt/cross/mipsel/4.1.0-uclibc-0.9.28/bin/mipsel-linux-uclibc-gcc
|  STRIP    = /opt/cross/mipsel/4.1.0-uclibc-0.9.28/bin/mipsel-linux-uclibc-strip
| Settings:
|  CONF_DIR = /etc/oscam
|  CC_OPTS  = -O2 -ggdb -ffunction-sections -fdata-sections
|  CC_WARN  = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
|  CFLAGS   = -DWITH_LIBUSB
|  LDFLAGS  = -Wl,--gc-sections -DWITH_LIBUSB
|  LIBS     = -lusb-1.0 -lrt -lpthread -ldl
| Config:
|  Addons   : WEBIF WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX
|  Protocols: NEWCAMD CCCAM CCCSHARE
|  Readers  : NAGRA CONAX VIACCESS
|  CardRdrs : PHOENIX MP35 SMARGO
|  Compiler : mipsel-linux-uclibc-gcc (GCC) 4.1.0
|  Linker   : GNU ld version 2.16.1
|  Binary   : Distribution/oscam-1.20-unstable_svn7942-mipsel-linux-uclibc-libusb
+-------------------------------------------------------------------------------

download

**lao** · 29-11-12, 08:58

Rezolvat. Ca de obicei... o chichita!
Cu simplebuild.
La optiuni se pune USB=Yes dar trebuie si Static=Yes

Wiki sa traiasca!

Multumesc celor care au facut un efort sa ma ajute.

**potty** · 07-12-12, 17:18

Ma poate ajuta cineva cu un oscam cu pcsc reader pentru routerul asta?

Thx

**mirel** · 08-12-12, 19:57

salut

incearca-l pe asta:

Code:

+-------------------------------------------------------------------------------
| OSCam ver: 1.20-unstable_svn rev: 7951 target:
| Tools:
|  CROSS    = mips-linux-uclibc-
|  CC       = mips-linux-uclibc-gcc
|  STRIP    = mips-linux-uclibc-strip
| Settings:
|  CONF_DIR = /usr/local/etc
|  CC_OPTS  = -O2 -ggdb -ffunction-sections -fdata-sections
|  CC_WARN  = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
|  CFLAGS   = -static-libgcc
|  LDFLAGS  = -Wl,--gc-sections -static-libgcc
|  LIBS     = -lpthread -ldl
| Config:
|  Addons   : WEBIF TOUCH CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX
|  Protocols: CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX
|  Readers  : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD BULCRYPT
|  CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI
|  Compiler :
|  Linker   : /bin/sh: mips-linux-uclibc-gcc: not found
|  Binary   : Distribution/oscam-1.20-unstable_svn7951-
+-------------------------------------------------------------------------------

download

**lao** · 27-07-13, 13:37

A mai compilat cineva recent ?
Ca nu reusesc sa-l mai nimeresc...

**fery21** · 28-07-13, 01:34

Il gasesti compilat la fritzbox...

**lao** · 28-07-13, 01:51

Bineinteles ca am gasit unul care merge (8758), dar eu le compilez dupa nevoile mele.
Sunt impotriva binarelor luate de gata!

Thread: Router TP-Link TL-WR1043ND cu Oscam

Thread Tools

Display

oscam+pcsc

Posting Permissions