N Line in spark

[lme]

I have an N line for spark. Loaded it in oscam server & cccam.conf bur no go.
Is any specific version of oscam that works on spark ?

[horatyu]

read tutorials spark here http://sateliti.info/showthread.php?22725-Oscam-pe-Spark-...exemplu&p=164202&viewfull=1#post164202


in oscam.server put new reader :

 
 [reader]
label = tvr
enable = 1
protocol = internal
device = /dev/sci0
caid = 0500
ident = 0500:fff720,025900,025910
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,2,4
lb_weight = 100

[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100               


[reader]
label = linie_C
enable = 1
protocol = cccam
device = host.dyndns.com,12000
user = user
password = parola
inactivitytimeout = 1
reconnecttimeout = 30
group = 1
lb_weight = 100
cccversion = 2.1.1
cccmaxhops = 3
ccckeepalive = 1

in oscam.user put new [account] for each client is different account

[account]
user = alien
pwd = amiko
group = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1722
chid = 0604:000014,000069,0000F4,0000F5,0000FA
cccmaxhops = 2
keepalive = 1

# This is the clients ( users ) list
[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1

[lme]

tHANK YOU.
will do 2nd part tonight.

[lme]

Doesn't work.
any other suggestions ?

[horatyu]

please say what does not?
line local N ===> not open the image you tv channels?
or
N line as a customer in sharing TV channels do not open image

so...I think you do not do something right

Each space must be respected, every comma

[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100




here " host.dyndnds.com " is Your line N

34000 is a port that you have to open it in router ( you open port in your router? )

check you can do here ( take a test if your port here )http://www.whatsmyip.org/port-scanner/
do you check (scanner)if your oscam is on

user and password need to set in oscam.user in new account


[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1

[lme]

The same N-line settings work on e2 but on spark.

[lme]

please say what does not?
line local N ===> not open the image you tv channels?
or
N line as a customer in sharing TV channels do not open image

so...I think you do not do something right

Each space must be respected, every comma

[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100




here " host.dyndnds.com " is Your line N

34000 is a port that you have to open it in router ( you open port in your router? )

check you can do here ( take a test if your port here )http://www.whatsmyip.org/port-scanner/
do you check (scanner)if your oscam is on

user and password need to set in oscam.user in new account


[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1

I do have all these settings in o.server & o.user
What needs to be activated from plugin menu ?
I had tried all combinations and got the same: "scrambled or not running"
Aru you guys running spark 1.2.50 or earlier versions ?

[horatyu]

somewhere in the receiver menu ====> activated "oscam" or another system for share

(to many receivers) usually the blue button is for this help

I not have this receiver

[lme]

now you are talking. You do not have this stb but you are giving advice !!!!
There is no blue button for spark sys.

[horatyu]

on remote control is blue button



advice applies to any configuration "oscam" on any satellite receiver with Linux

[Tody]

IME!
To activate plugin in spark, do this:
MENU-Plug in--- and here you will see the installed plugins list. You use N line, so you must start mgcamd.sh4.

If you don`t see the plugins there, it`s mean you must to install it first (with a memory stick).
If you need help, please write me.