Merlin 3 OE 2.0

**gabrield** · 03-07-12, 17:33

Corect graiesti.
Dar am bagat si cu dreamup si cu htmp 2-3 imagini de aici si nu vrea sa b ooteze.

O sa bag una mai veche, pacat ca nu a vrut cu open pli.

**zappa** · 03-07-12, 18:02

Incearca Italysat. E bazata tot pe openpli.

**gabrield** · 03-07-12, 23:09

Ok, o iau imediat.

dar am mai sapat un pic, ai avut dreptate, pe simul meu scrie 2.01, am facut si poze.

Numai ca scrie asa la pagina de update firmware :

DM800 second stage loader #84 (2011-09-02)

Trebuie sa bag in seama mesajul asta sau incar firmware in josul paginii ?

**zappa** · 03-07-12, 23:21

Imagine ptr dm800 cu sim 2.01 si bootloader 84b (care e ultimul).

**gabrield** · 04-07-12, 01:27

Am pus urmatoarele imagini :

allianceHD-4.6-dm800-Sim2.84.b.riyad66.nfi
openaaf-1.0-dm800.sr3-2012-06-20-sim2-SSL-84b.by aguda.nfi
italysat svn44dm800sim2robi62.nfi
ItalySat3.0-dm800.sr3-SVN_047-2012-06-28-sim2-SSL-84b.by aguda.nfi

La toate se opreste in timp ce scrie pe display booting... si ledul flashuieste

**zappa** · 04-07-12, 07:35

Exista o procedura sa te conectezi la dream prin hyperterminal cu cablu null modem. Asta ca sa vezi logul in timp ce booteaza si sa iti dai seama unde e buba.

**gabrield** · 04-07-12, 10:48

Care e procedura, mai exact ?

**zappa** · 04-07-12, 10:58

Nu stiu ptr ca nu am avut nevoie sa dezvolt subiectul. Dar sigur se poate. Mai sapa si tu. De unde esti?

**gabrield** · 04-07-12, 13:47

Interesant este ca desi a ramas blocat cursorul in timpul bootarii, pot sa ma conectez cu telnet la el.

**zappa** · 04-07-12, 13:51

Da un dmesg si posteaza logul, ca poate intelegem ceva. Nu ai salvat niciun settings de pe el....vreun backup? Eventual pune un skin care stii ca merge pe acea imagine.

Uite si procedura, dar daca reusesti sa te conectezi la el prin terminat nu cred ca ai nevoie. Probabil enigma2 nu mai porneste. Vezi ce procese ruleaza - ps.

http://linuxsat-support.com/enigma2-...l-program.html

**gabrield** · 04-07-12, 19:22

Bad block table found at page 1ffe0, version 0x01
Bad block table found at page 1ffc0, version 0x01
brcmnandCET: Status -> Deferred
numchips=1, size=4000000
Creating 4 MTD partitions on "bcm7xxx-nand.0":
0x0000000000000000-0x0000000004000000 : "complete"
0x0000000000000000-0x0000000000040000 : "loader"
0x0000000000040000-0x0000000000400000 : "boot partition"
0x0000000000400000-0x0000000004000000 : "root partition"
ehci_hcd_brcm_init: Initializing 1 EHCI controller(s)
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
- USB h/w setup mode <B>
- USB power enable set for active LOW mode
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480508
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using brcm-ehci and address 2
Initializing USB Mass Storage driver...
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50
2006 UTC).
ALSA device list:
No soundcards found.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Empty flash at 0x02f1d4a4 ends at 0x02f1d600
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 128k freed
Warning: unable to open an initial console.
isa bounce pool size: 16 pages
Vendor: JetFlash Model: TS2GJFV30 Rev: 8.07
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 4005886 512-byte hdwr sectors (2051 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 4005886 512-byte hdwr sectors (2051 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: Attached scsi removable disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
CPU 0 Unable to handle kernel paging request at virtual address c02cd5fc, epc ==
80000eec, ra == 80000dd4
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008400 00000004 ef623a7f
$ 4 : c02cd5fc 8305648c 00000000 00000008
$ 8 : c00a0d1c 80135e28 45621505 ff6987c5
$12 : ff096a05 2e6b65e8 3b5e3563 8bd0d226
$16 : 89239d00 8034d600 891e83f4 00000001
$20 : 00000001 00000002 88eda200 88ee3400
$24 : 9c1da71a 3d8325ce
$28 : 88efe000 88effc28 88eda200 80000dd4
Hi : 00000001
Lo : 9999999c
epc : 80000eec 0x80000eec Not tainted
ra : 80000dd4 0x80000dd4
Status: 10008403 KERNEL EXL IE
Cause : 00800008
BadVA : c02cd5fc
PrId : 00020000
Modules linked in: ext2
Process mount (pid: 55, threadinfo=88efe000, task=88e2a8b8)
Stack : 8003e594 88effc2c 88effc2c 8034d600 891e83f4 80000dd4 89239d54 00000004
c00a0728 89239d00 89239d00 c00a0264 00000000 8007bf88 80378ca8 00000000
88effc84 00000000 00000000 800b4460 00000000 00000200 80378ba0 8034d600
80378bb8 00008000 00000000 88ee4000 00008000 004b0000 00496cc0 8007c588
80360000 80039564 00000001 8923be28 31626473 88effd00 00000001 800864c8
...
Call Trace:
[<8003e594>] wake_bit_function+0x0/0x5c
[<c00a0728>] ext2_fill_super+0xa7c/0xda4 [ext2]
[<c00a0264>] ext2_fill_super+0x5b8/0xda4 [ext2]
[<8007bf88>] sget+0x378/0x394
[<800b4460>] disk_name+0x70/0xf4
[<8007c588>] get_sb_bdev+0x158/0x1b0
[<80039564>] request_module+0xd8/0x174
[<800864c8>] link_path_walk+0xe0/0x1c4
[<c009eda4>] ext2_get_sb+0x2c/0x38 [ext2]
[<8008fed0>] d_lookup+0x34/0x8c
[<80134f74>] snprintf+0x1c/0x28
[<c009fcac>] ext2_fill_super+0x0/0xda4 [ext2]
[<8007b0fc>] vfs_kern_mount+0x50/0xec
[<80093b30>] get_fs_type+0xa4/0x190
[<8007b1e4>] do_kern_mount+0x3c/0x70
[<8000eaa4>] do_page_fault+0x94/0x3a0
[<80096890>] do_mount+0x2f4/0x67c
[<8008fed0>] d_lookup+0x34/0x8c
[<80134f74>] snprintf+0x1c/0x28
[<800aedb4>] proc_flush_task+0x5c/0x1c8
[<8000f6b0>] tlb_do_page_fault_0+0x100/0x108
[<80027a70>] release_task+0x288/0x3ac
[<80094b34>] copy_mount_options+0x54/0x150
[<8029c3a8>] __lock_text_end+0xf40/0x1ac8
[<80096c9c>] sys_mount+0x84/0xf8
[<8000d68c>] stack_done+0x20/0x3c

Code: 00882020 250805f4 8ca3fff4 <8c870000> 1467ffde 240651c8 0cc02bb5 afa8
0020 1000ffda
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new driver r871x_usb_drv
cdfs 2.6.18 loaded.
stb_core: module license 'Proprietary' taints kernel.
enter base init, xvd 20090807, vdc 20080313, rap 20090430, xpt 20080313
kernMemSize : 148 MB
19:942015000 SMCA: controller reset timed out
register adapter
register adapter
register adapter
register adapter
register adapter
input: dreambox front panel as /class/input/input0
HDMI: device attached
set sb to 3(2)
set fb to 2(-1)
set input to 0
set fb to 2(-1)
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
display 0 uses vbi path 1
display 1 uses vbi path 0
HDMI: hotplug handler!
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=24
HDMI detected
HDMI mode
use EDID to detect colorspace
using colorspace: 1
set fb to 2(0)
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
disable wss on display 0
disable wss on display 1
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
enable mad
VIDEO0: set fallback framerate to 60000
VIDEO0: set progressive override mode to 1
VIDEO0: set streamtype!
set MPEG2
sw rave disabled!
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0 got pts failed !!!! (ret 0)
set ac3 to downmix
set aac to downmix
VIDEO0: first pts 0x0
init ALSA!
DVB: registering new adapter (BCM7401)
enable tsm0
autodetecting NIMs...
ret: 2, feid: 06
Found: Slot A, ID: 06 (by CA)
Initializing adapter 0 (Alps BSBE2-DVB-S2)
special BSBE2 treatment:
DVB: registering adapter 0 frontend 0 (cx24116)...
registered vtuner vtuner0, minor 61
registered vtuner vtuner1, minor 60
VIDEO0: stop decode
no decoder left in sync handling so disable xpt_sync
input: dreambox remote control (native) as /class/input/input1
input: dreambox advanced remote control (native) as /class/input/input2
input: dreambox ir keyboard as /class/input/input3
input: dreambox ir mouse as /class/input/input4
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Seri
al Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NTFS driver 2.1.27 [Flags: R/O MODULE].
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
rtusb init rt2870 --->
usbcore: registered new driver rt2870
usbcore: registered new driver rt73
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'TKIP'

Linux kernel driver for RTL8187 based WLAN cards
Copyright (c) 2004-2005, Realtek
rtl8187: Initializing module
rtl8187: Wireless extensions version 20
rtl8187: Initializing proc filesystem
usbcore: registered new driver rtl8187

rtw driver version=v3.3.2_3192.20120103
usbcore: registered new driver rtl8192cu
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

_____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
ZD1211B - version 2.22.0.0-development
usbcore: registered new driver zd1211b
4028635 ms:
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=18
HDMI detected
HDMI mode
use EDID to detect colorspace
using colorspace: 1
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
650 ms: 20
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: set blank to 0
1717 ms: 30
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
2513 ms: 40
229 ms: 50
47 ms: 60
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0x0
VIDEO0: framerate changed 3
VIDEO0: resolution changed (1280 720)
VIDEO0: aspect changed 3
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync

**gabrield** · 04-07-12, 22:53

Multumesc zappa, cred ca am gasit buba.

Era un stick usb, cum l-am scos cum a bootat cum trebuie.

**zappa** · 05-07-12, 15:33

Pai ce avea stickul? Eu niciodata nu l-am scos desi am instalat zeci de imagini.

**gabrield** · 05-07-12, 16:30

Nu stiu ce avea, dar l-am scos si acum booteaza.

Eu il tineam pentru picons, dar nu l-am folosit niciodata cica ingreuneaza daca pui picon.

Thread: Merlin 3 OE 2.0

Thread Tools

Display

Posting Permissions