Argolis Smargo Smartreader Triple Reader

[franta]

m-am interesat de un smargo si am dat peste acest reader care pare interesant , un card reader 3 in 1 , aveti mai multe informatii legate de acest produs, face ceia ce spune ?
Argolis Smargo Smartreader Triple Reader



din poza pare ca se conecteaza pe usb fara alta alimentare externa


toate cele bune

[fery21]

Sucesorul lui Smargo 3in1 aproape aceleasi calitati ale sucesorului inbunatatiria a venit din partea procesorului ARM care a eliminat unele probleme de deconectare...

[franta]

merge folosit impreuna cu vu+ duo, ma refer daca e compatibil ca drivere?
@fery21poti sa dai m,ai multe detalii despre cum se configureaza /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
mersi pt detalii

[fery21]

smartreader 001:002
smartreader 001:003
smartreader 001:004

[qwess]

nu stie smartreader, probabil pe viitor, insa merge in mouse /smargo protocol

ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver


T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0403 ProdID=6011 Rev= 5.00
S: Manufacturer=Argolis
S: Product=Triple Reader+
S: SerialNumber=00000007
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=150mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms



FTDI :: smargo/ mouse ???
/dev/ttyUSB0-1-2

CCcam.cfg:

SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+

[fery21]

Pai si cum spui ca nu suport smartreader ? ai testat tu pe ce ?