Zvonuri N3

[costibarda]

Daca imi merge PrimaFila asta inseamna ca e spart NDS.. deschide cu 09cd!!!
... NO WAY...

Poate ceva CSP!!!

Vad ca si DigiPremium #merge# ... cu freeze!!

[dic_star79]

Dacă ai carduri bune deschide ce vrea muşchii noştri.

[MaximusFBI]

New!! Duo card

HOW TO UPGRADE DUO CARD

Update using a pendrive:

1) rename the DuoAPPv18.duo file to duoAPP.duo
2) copy the duoAPP.Duo file into a pendrive on root directory.
3) insert the pendrive in the receiver
4) on the receiver, select update DUO Card and wait

your card is already updated!
Update using a PC and a phoenix interface:

1- copy the DUOAPPv18 and the DuoAppLoader files in your PC.
2- Select the apropiate com port for you PHOENIX adapter.
3- Select the apropiate firmware
4- push "connect"
HOW TO UPGRADE FIRMWARE

To do the upgrade, turn off the STB and connect the STB to the PC using a null
modem cable (2-3 3-2 5-5), then start the program in the PC, select the new
firmware to load and start the upgrade procedure, then turn the STB on and the
upgrade process will begin. Follow the screen instructions.


EMU MODE


When Emumodule is active, you can access to special menus

- MENU - TOOLS - KEY EDITOR - to edit the keys that change periodically
- INFO - INFO (two times INFO key) - to display information about emulation


------------------------------------------------------------------------------
|********This information does not affect SRX series******** |
------------------------------------------------------------------------------

By default, the module is deactivated, to activate it do the following
process

1.- Go to main menu (press menu in RCU)
2.- Press 2 0 2 0 in the RCU
3.- A popup message will appear CAS SYSTEM ENABLED
4.- Emu module is now working

To disable the module repeat the above procedure, the popup will change
to 'CAS SYSTEM DISABLED'

AUTOUPDATE CONTROL
By default, autoupdate in D+ and TV Cabo is activated.
to deacativate it, go to Main Menu (press menu key in your RCU), and press
2121


duoappv18.zip


duoapploader.zip

---------- Post added at 18:03 ---------- Previous post was at 18:01 ----------

Bouquets of entry of the card broken system NAGRA3


Digital + Spain

And tv cabo

Then join the rest of the packages

GIGITV ROMANIAN

The Polish polsat

Update method

It seems that it would operate on many of the devices, but updated for ways PHOENIX programmed as follows:

1 - Copy the two files and DUOAPPv18 DuoAppLoader to your device

2 - Select your com port Palmbermjh PHOENIX

3 - Select the attached file to update the card

4 - Click on the connect would have been updated

As for Starsat devices that support is still ongoing and noted mean: Theta, Mu, Nu, Iota

Fathdat after the card is inserted in the device and raise the update by the UsB as follows:

1 - rename the file to DuoAPPv18.duo duoAPP.duo

2 - copy the file to the Usb duoAPP.Duo

3 - Install to the device, the Usb

4 - Select the device in this DUO Card is the property and has recently appeared in the devices listed

Then wait for the card is updated

Note:

After doing these steps on the device recognizes the Theta is to update the card, but required to be included

Apparently there is in store for the days of the team

[cipryDXfeed]

ceva poze cu cardu asta? sau sunt povesti.

[bonou2]

aici se gaseste tot ce se scrie despre duo card dar si o poza
http://www.sat-universe.com/showthread.php?t=224701

[MaximusFBI]

Latest News and file by official web (MoreSat) :

We only support the update of the DUO card, the DUO card is not moresat card in anyway.

The packages open in the DUO ard are Csat, some Orange and TNT.

It has been stated that the DUO card opens the Digital+ package but this is NOT so.

[zmeura]

Mda.Asteptam alt zvon ca asta s-a ... dezumflat.