Cred ca digi este setat bine deoarece daca bag cablul direct in tv am imagine.
Pot sa spun sigur ca nici cand kathi este in stand-by nu am imagine pe tv.
O alta intrebare de ce in meniul E2 exista pozitia "VCR SCART" care cand este selectata da mesajul din primul post.
Atasez mai jos paragraful din manualul lui kathi deoarece nu sunt un vorbitor de engleza prea bun si as vrea sa vad daca am inteles bine eu:
Code:
AUX button:
If an external device is connected to the VCR Scart socket, the TV signal present at the VCR Scart socket can be looped
through to the TV Scart socket. Pressing the AUX button more than once toggles between the TV Scart mode and
the VCR Scart loop-through mode.
.........................
Connect the satellite receiver (VCR/AUX Scart socket) to the video recorder/DVR using a Scart cable. To play back a
DVD, i.e. output the signal from the DVR through the receiver on the TV set, the TV set must also be connected to the
receiver with a Scart cable. This is necessary as there is no upscaling of the video signal from the VCR Scart socket to the
HDMI output.
Oricum aici nu spune nimic de stand-by.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
