I installed many versions image for my clone 800hd,but have problem.
In tv out only logo for example " Gemini" and not booting,not see the menu and others.
Why is the problem..?
Info:
Dm 800hd
sim1.0
ssl69
china.
waiting your replies...
I installed many versions image for my clone 800hd,but have problem.
In tv out only logo for example " Gemini" and not booting,not see the menu and others.
Why is the problem..?
Info:
Dm 800hd
sim1.0
ssl69
china.
waiting your replies...
Hello,
You wrote a new image patched with sim1.0 and BL69?
Sim1.0 is Ferrari or not?
sim1.0 not is Ferrari.
have downloaded image for clone dm 800hd sim1
do not know what is patched image.
I tested many image,but no work,only logo...."logo of image" nothing more
.....
Last edited by delta2k2; 04-12-11 at 22:30. Reason: Rule 12
The problem is the sim card. Do not make good contact. Open receiver, remove sim card, clean and put back together again.
how to make remove sim card and clean...?
Last edited by delta2k2; 05-12-11 at 11:14. Reason: Rule 12
You hawe update you sim ?
copy-paste for all forum
Try put i't is image:http://rapidshare.com/files/28934694...stage_pack.rar
how to use enforcer
1) connect dead box to dreamup, press connect
2) press ok at ca error popup, any error just press ok
3) download enforcer
4) drag enfocer in front om dreamup, press enable in enforcer
5)press flash and chose flash file
6) flash probably hangs
7) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now
--------------------
Originally Posted By: marcin22
1) Connect broken dreambox DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open http://www.gsmsweden.com/forhike/sat...stage_pack.rar
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chose firmware.
7) The flash progress will probably hang, its OK.
8) Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication)
when it says file to big. the dreamup didnt detect dm800. This is happen beacuse dreamup is set by default to send old type image. Dm800 has .nfi which is diffrent and bigger. To fix the TOO BIG error, just load the SSL69.NFI boot only using the WEB IP address on Explorer or Firefox.
http://rapidshare.com/files/40983043...0-SSL70_TS.rar
- Gemini with Plugin addon Fixed
http://rapidshare.com/files/41687145...SSL70_TSv2.rar
Last edited by djeclipse; 05-12-11 at 11:58.