Focus sau Dolce cu Phoenix via USB -RS232

[mario08]

@coco am schimbat si frecventa , tot nu merge

@f11 uite raportul , nu poate sa deschida /dev/ttyUSB0 , adaptorul HL 340 functioneaza , am pus o imagine cu el prin nullmodem in kathi si a functionat , phoenixul cred ca merge este nou , led-urile sunt aprinse , cardul focus l-am verificat in receptorul focus unde a fost activat .


2011/12/17 11:01:13 0 s >> OSCam << cardserver started, version 1.20-uns table_by_EasyBuild_svn, build #6034 (sh4-linux)
2011/12/17 11:01:13 0 s version=1.20-unstable_by_EasyBuild_svn, build #60 34, system=sh4-linux-
2011/12/17 11:01:13 0 s client max. idle=120 sec, debug level=0
2011/12/17 11:01:13 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/12/17 11:01:13 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/17 11:01:13 0 s services reloaded: 0 services freed, 12 services loaded, rejected 0
2011/12/17 11:01:13 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2011/12/17 11:01:13 0 s signal handling initialized (type=sysv)
2011/12/17 11:01:13 0 s 1632 service-id's loaded in 88ms
2011/12/17 11:01:13 0 s can't open file "/var/keys/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/17 11:01:13 0 s 3 provid's loaded
2011/12/17 11:01:13 0 s 5 lengths for caid guessing loaded
2011/12/17 11:01:13 0 s Starting listener 0
2011/12/17 11:01:13 0 s newcamd: disabled
2011/12/17 11:01:13 0 s Starting listener 0
2011/12/17 11:01:13 0 s cccam: Bind request failed, waiting another 119 s econds
2011/12/17 11:01:14 0 s cccam: Bind request failed, waiting another 118 s econds
2011/12/17 11:01:15 0 s cccam: Bind request failed, waiting another 117 s econds
2011/12/17 11:01:16 0 s cccam: Bind request failed, waiting another 116 seconds
..................................................................................................
2011/12/17 11:03:10 0 s cccam: Bind request failed, waiting another 2 seconds
2011/12/17 11:03:11 0 s cccam: Bind request failed, waiting another 1 seconds
2011/12/17 11:03:12 0 s cccam: Bind request failed, giving up
2011/12/17 11:03:12 0 s Starting listener 0
2011/12/17 11:03:12 0 s pandora: disabled
2011/12/17 11:03:12 0 s http thread started
2011/12/17 11:03:12 0 s reader check thread started
2011/12/17 11:03:12 0 s check thread started
2011/12/17 11:03:12 0 s creating thread for device /dev/ttyUSB0
2011/12/17 11:03:12 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/12/17 11:03:12 0 s waiting for local card init
2011/12/17 11:03:12 530DA0 h HTTP Server couldn't bind on port 84 (errno=98 Address already in use). Not starting HTTP!
2011/12/17 11:03:12 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:03:12 52F640 r Cannot open device: /dev/ttyUSB0
2011/12/17 11:04:12 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:04:12 52F640 r Cannot open device: /dev/ttyUSB0
2011/12/17 11:05:12 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:05:12 52F640 r Cannot open device: /dev/ttyUSB0
2011/12/17 11:06:12 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:06:12 52F640 r Cannot open device: /dev/ttyUSB0
2011/12/17 11:07:12 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:07:12 52F640 r Cannot open device: /dev/ttyUSB0
2011/12/17 11:08:13 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:08:13 52F640 r Cannot open device: /dev/ttyUSB0
2011/12/17 11:09:13 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:09:13 52F640 r Cannot open device: /dev/ttyUSB0
2011/12/17 11:10:13 52F640 r ERROR opening device /dev/ttyUSB0
2011/12/17 11:10:13 52F640 r Cannot open device: /dev/ttyUSB0

De ce nu poate sa deschida USB-ul ? Acum ceilalti readeri sunt disabled , dar cand sunt activi de ce nu merge sharingul in prezenta reader-ului Focus ?

[zildan]

Pentru ca e o optiune care tine oscamul pe loc pana initializezi cardul.
Dezactivezi optiunea si nu mai ai aceasta problema.

[mario08]

@Zildan , am priceput ....inseamna ca problema este din Phoenix , pe care oscam nu-l deschide, pt. ca nu-l vede in /dev/ttyUSB0 din cauza adaptorului care s-ar putea sa fie incompatibil . Am conectat adaptorul la PC cu O.S. Windows7 si-mi aloca portul COM3 ....sper Kathi sa nu aiba vreo problema in acest sens.
Nu stiu ce sa fac as cumpara alt card-reader ....CHIAR NU A INSTALAT NIMENI PHOENIX by Geluvis in Kathi ?

Mai are cineva v'o parere ?

[stargate]

Eu am incercat pe un router topex sa pun un card Focus intr-un phoenix by gelvis cu adaptor serial-usb si in oscam nu deschide din card dar din newcs merge corect ... personal am ajuns la concluzia dupa muuuulte nopti pierdute ca in combinatia de mai sus oscam nu deschide din focus si ca totul este de la oscam care nu stie sa lucreze corect in combinatia oscam + adaptor usb-serial + phoenix by gelvis + focus .

[mario08]

Deci solutia ar fi sa instalez Newcs si sa ma leg in Oscam ...din panel la Newcs Config mi-au aparut doua fisiere 12001.list si newcs.xml cum le editez pt. kathi si cum pun readerul in oscam ? Adica unde gasesc un exemplu ?

Alta alternativa ar fi sa cumpar un card-reader . Care este cel mai bun ? multivalent...