problema start cam

[smurf]

pune una care iti mergea
a aparut si bootloader 84 ala pt clone cu sim 2.01 si teoretit trebuie sa mearga si ultima imagine dar nu stiu ca nu am clona

[raks67]

Am instalat nemesis 2.1 e2 , am pus fisierul extra.url in /etc deoarece in var nu este etc , din blue panel am ales useraddons dar da mesajul : incorect formated xml ; poate trebuia denumit fisierul extra.xml sau useraddon.xml . Am incercat sa instalez si manual camurile dar nu se regasesc dupa reboot in blue panel . Cei care lauda EDG Nemesis mai au o sansa sa ma convinga sa folosesc imaginea , multumesc .

[smurf]

Eu asa il am ....in /var/etc tot acolo unde e si CCcam.cfg
extra.url asa trebuie pus

poate la o imagine mai veche e altfel.
pune si tu bootloader84 ala ..pui enigma aia r93 si ai si update la enigma si iti merge si cu extra.url

[raks67]

bootloaderul 84 il am de cind a aparut in 28.10.2011 , extra.url l-am pus in /etc si l-am pus unde trebuie deoarece apare butonul in blue panel iar daca-l sterg nu mai e butonul user addons in blue panel , cu svn093 s-a oprit bootarea la instalare ( ssl84 instalat ) deci nu am cum sa fac update la 095

[smurf]

Eu am avut problema asta cu update cand am pus 2.1 si i-am facut update direct.
Au ei un bl84 pe site dar probabil e pt alea orig.
Incearca asa

sa pui bl84 prin web
reboot
urci r93 web
pui iar bl84 web
reboot

cica asa merge la clone.
la mine a mers doar web bl84 si peste r93 fara nici un reboot.
dupa reboot update online la 95

[raks67]

ok , am instalat nemesis svn093 mod by ramiMaher , am instalat extra.url si de acolo cccam emu oscam server , in blue panel am la softcam cccam iar la servers oscam ; cum fac sa setez sa porneasca oscam si dupa un timp cccam la reboot de exemplu ?

---------- Post added at 20:16 ---------- Previous post was at 19:29 ----------

#!/bin/sh
########################################
###### Powered by The Gemini Team ######
### http://www.i-have-a-dreambox.com ###
########################################
# camid #
# 0000 = Commom Interface #
# 0001->0099 = for User Experiment #
# 0177 = Rq-Echo-Client #
# 0178 = RqCS #
# 0179 = RqCamd #
# 0189 = OpenCam #
# 0199 = Dccamd #
# 0200->0299 = Fbiss #
# 0300->0399 = Camd3 #
# 0400->0499 = Camx #
# 0500->0599 = Camx-Radegast-CS #
# 0600->0699 = Evocamd -OLD #
# 0700->0799 = Evocamd_ronlad_cs -OLD #
# 0800->0899 = Mgcamd -OLD #
# 0900->0999 = Mgcamd_ronald_cs -OLD #
# 1000->1099 = Newcamd -OLD #
# 1100->1199 = Newcamd-ronald_CS -OLD #
# 1200->1299 = Newcamd-spider -OLD #
# 1300->1399 = Radegast #
# 1400->1499 = Ronald-CS #
# 1500->1599 = Scam #
# 1600->1699 = Scam-Ronald-CS #
# 1700->1799 = OSCam #
# 1800->1899 = NewCS #
# 2000->2099 = Camd3 #
# 2300->2399 = Camd3-NewCS #
# 2600->2699 = Camd3-MPCardserver #
# 3000->3099 = Evocamd #
# 3100->3199 = Evocamd-Ronald-CS #
# 3200->3299 = Evocamd-NewCS #
# 3300->3399 = Evocamd-MPCardserver #
# 4000->4099 = Mgcamd #
# 4100->4199 = Mgcamd-Ronald-CS #
# 4200->4299 = Mgcamd-NewCS #
# 4300->4399 = Mgcamd-OSCam #
# 5000->5099 = Newcamd-Betad #
# 5100->5199 = Newcamd-Cardserver #
# 5200->5299 = Newcamd-Spider #
# 5300->5399 = Newcamd-NewCS #
# 5400->5499 = Newcamd-OSCam #
# 6000->6099 = CCcam #
# 6100->6199 = CCcam-Capmtserver #
# 6200->6299 = CCcam-NewCS #
# 6300->6399 = CCcam-OSCam #
# 7000->7099 = Mbox #
# 7100->7199 = Mbox-NewCS #
# 9500->9599 = reserved #
# 9600->9699 = reserved #
# 9700->9799 = reserved #
# 9800->9899 = reserved #
# 9900->9999 = reserved #
########################################

CAMD_ID=6392
CAMD_NAME="CCcam 2.1.3/OSCam 1.00"
CAMD_BIN=CCcam_2.1.3
CAMD_CS_SRV_BIN=oscam_1.00

INFOFILE_A=ecm0.info
INFOFILE_B=ecm1.info
INFOFILE_C=ecm2.info
INFOFILE_D=ecm3.info
#Expert window
INFOFILE_LINES=1111111111000000
#Zapp after start
REZAPP=0

########################################

logger $0 $1
echo $0 $1

remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}

case "$1" in
start)
remove_tmp
/usr/bin/$CAMD_CS_SRV_BIN &
sleep 20
/usr/bin/$CAMD_BIN &
;;
stop)
killall -9 $CAMD_CS_SRV_BIN $CAMD_BIN 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac

exit 0


postez si scriptul cu probleme poate sesizeaza vreun expert problema

[raks67]

Acum ca am ajuns in faza asta nimeni nimic ? asa cu pornire manuala dupa restart mergea si pe gemini , cind cadea tensiunea de retea era problema - am ups dar mai sint si alte situatii ; cu cron setez probabil pornirea separata a camurilor dar in cazul unui restart programat tot cu cron cum se rezolva ? multumesc