Config oscam reader bigi N3

**costel_mcb** · 13-05-11, 21:14

poate sa ma ajute cineva sa config un card bigi pe un router wl500gp v2, cititor smargo, instalat si testat cu cartela tvr hd, cu bigi nu reusesc

---------- Post added at 21:14 ---------- Previous post was at 21:09 ----------

011/05/13 11:12:10 C04 h restarting reader digi
2011/05/13 11:12:10 C04 h creating thread for device /dev/ttyUSB0
2011/05/13 11:12:10 2E007 r reader thread started (thread= 2E007, label=digi, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2011/05/13 11:12:10 2E007 r smargo init
2011/05/13 11:12:11 2E007 r digi card detected
2011/05/13 11:12:19 2E007 r Error activating card.
2011/05/13 11:12:27 2E007 r Error activating card.
2011/05/13 11:12:36 2E007 r Error activating card.

[reader]
label = digi
protocol = smargo
device = /dev/ttyUSB0
services = digi
fallback = 1
caid = 1802
rsakey = Dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx27
boxkey = ExxxxxxxxxxxxxxxxxD
detect = cd
mhz = 368
cardmhz = 368
group = 1,2,3,4
emmcache = 1,3,2

**fery21** · 13-05-11, 21:30

NU exista protocol smartgo
poti folosi mouse sau smartreader

**costel_mcb** · 13-05-11, 21:51

mai verifica odata, exista

**qwess** · 13-05-11, 22:47

trecel pe mouse in smargo merge cand vrea, cu toate ca scoate ecm mai mic:

[reader]
label = digi
#protocol = smargo
protocol = mouse
device = /dev/ttyUSB0
services = digi
#fallback = 1
fallback = 0
caid = 1802
rsakey = Dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx27
boxkey = ExxxxxxxxxxxxxxxxxD
detect = cd
mhz = 368
cardmhz = 368
#group = 1,2,3,4 # ID UNIC pe reader, MultiID pui pe USERS
group = 1
emmcache = 1,3,2

**costel_mcb** · 14-05-11, 10:58

da, am reusit dar am un ecm de 0.750- 1.100 , mi se pare prea mare, vreo rezolvare?

la smargo nu am facut nici un update, trebuia????

ce ecm ar trebui sa am???

**lao** · 14-05-11, 11:16

Un ecm bun pentru caid-ul tau e 0.300-0.350. E ceva in neregula acolo, poate la smargo, dar vezi ce-i faci sa nu ramai fara el!!
Pune si alta versiune de oscam.....

**qwess** · 14-05-11, 11:52

Originally Posted by costel_mcb

da, am reusit dar am un ecm de 0.750- 1.100 , mi se pare prea mare, vreo rezolvare?

la smargo nu am facut nici un update, trebuia????

ce ecm ar trebui sa am???

cauze multiple, smargo progr/fw, driverele ftdi, usb....
pentru smargo:
MODE=autoswich
FREQ=3.69
KERNEL=normal
T=1(nagra)
EGT=0
T=1

**conyc** · 28-09-11, 20:15

desi am oscam.services si oscam.srvid pentru un card gigi 1802 actualizate ,facute de mine exact pentru pachetele de programe pe care le am ,primesc in continuare cereri pentru alte programe si am o multime de NOK.astept sfaturi si pareri si va multumesc ca aveti rabdare cu un incepator.

**Znuff** · 29-09-11, 01:18

Ne arati si un config?

Partile relevante din oscam.services si oscam.srvid

**conyc** · 29-09-11, 09:18

[global]
usrfile = /opt/logo/oscamuser.log
logfile = stdout
cwlogdir = /opt/logo/oscamCW.log
failbantime = 1
failbancount = 1
cachedelay = 120
bindwait = 15
unlockparental = 1
nice = 0
suppresscmd08 = 1
maxlogsize = 50000
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_save = 200
lb_nbest_readers = 9
lb_nfb_readers = 2
lb_min_ecmcount = 20
lb_max_ecmcount = 800
lb_reopen_seconds = 200
lb_retrylimit = 200
lb_nbest_percaid = 093B:1,1880:1,09CD:1,0B02:1,183D:1,0500:1
lb_savepath = /opt/logo/load.log
lb_reopen_mode = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[newcamd]
port = 15000@1802:000000,002011
key = 0102030405060708091011121314
keepalive = 0
[webif]
httpport = 10001
httpuser = root
httppwd = dreambox
httpcss = /var/mystyle/proflinux_ddcstyle.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.199
httphideidleclients = 1
[anticasc]
enabled = 1
aclogfile = ./oscam_ac.log

[reader]
label = digitv
protocol = internal
device = /dev/sci0
caid = 1802
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
boxkey = xxxxxxxxxxxxxxxxx
detect = cd
mhz = 358
cardmhz = 368
ident = 1802:000000,002011
group = 1
emmcache = 1,3,2
blockemm-s = 1
blockemm-g = 1
auprovid = 002011

**Znuff** · 29-09-11, 16:42

Păi și oscam.srvid ?!

---------- Post added at 16:42 ---------- Previous post was at 14:50 ----------

Pardon, vroiam sa zic oscam.services

**conyc** · 29-09-11, 18:04

# oscam.services generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5535
# Read more: http://streamboard.gmc.to/svn/oscam/...m.services.txt
#
# definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...

[baza]
caid=1802
provid=000000,002111
srvid=0424, 0AE6, 03EB, 04A1, 055A, 049C, 0D7A, 0D70, 03F0, 0AB4, 0DAC, 0550, 0D34, 04A3, 03F5, 03F2, 040C, 03F6, 040A, 03F9, 03F4, 03FE, 055C, 03F8, 0B22, 0C80, 055F, 0D20, 0B86, 03FB, 0DB6, 03FA, 0D84, 1018, 03FC, 0407, 0DE8, 03F1, 0D5C, 03F3, 03EE, 0492, 041A, 0C44, 0D48, 03EF, 0408, 0497, 0B18, 0CDA, 1040, 03F7, 0B90, 0A5A, 0D8E, 03E9, 03ED, 0CC6, 0D3E, 0C9E, 0C58, 1022, 0E06, 04A2, 0DDE, 03FD, 054A,0D52,0E10
[extra1]
caid=1802
provid=000000,002111 .
srvid=0405,0406,0404,0409,1004,062C,054E

[maxpack]
caid=1802
provid=000000,002111
srvid=0400,0D98,03FF

[cinestar]
caid=1802
provid=000000,002111
srvid=0FD2,0FE6,0FDC,1770

[radio]
caid=1802
provid=000000,002111
srvid=0E7E,0FC8,09D3,0E56,0DF2,0DFC,09EC,09E2,09D8,09F6,0A00,0E38,0E39,0E42,0E43,000C,0E1B,0E24,0E25 ,0E2E,0R2F

Thread: Config oscam reader bigi N3

Thread Tools

Display

Hybrid View

Config oscam reader bigi N3

Posting Permissions