Compilare oscam

[lao]

Versiune noua 0.6.8f, cea de mai sus este V 0.6.5b

v.0.6.1
- libusb-smartreader-support fixxed (many thx to thE_29)

v.0.6.1a
- pc build with libusb fixxed
- coolstream build fixxed

v.0.6.1b
- typo error-message pc-libusb fixxed

v.0.6.1c
- Makefile: "ds_opts=... -Winline -Wextra -Wall" deleted (not longer needed)
- setup correct default config-path on each platform (hopefully all correct)

v.0.6.1d
- fritzbox7390 build fixxed

v.0.6.1e
- sh4: liboscam_stapi.v0.08 added

v.0.6.2c
- libusb fixxed #2
- pcsc fixxed
- some typo's fixxed

v.0.6.2d
- svn checkout BACKUP REV 4800 added (option 1-get/update svn)

v.0.6.2e
- alternate dl-src for dreambox/ppc/ddwrt/nslu2 added

v.0.6.3
- oscam-svn online check optimized

v.0.6.3a
- oscam-svn online check optimized part2 (thx thE_29!)

v.0.6.3b
- oscam-svn online check optimized part3

v.0.6.3c
- coolstream/azbox/dockstar-pcsc typo fixxed
- oscam-svn-onlineupdate-check set back again to 'ping'

v.0.6.3d
- ddwrt-libpath default changed to '/opt/lib'
- oupdatecheck revert to wget

v.0.6.3e
- mainsetup: option 'do_onlinecheck added'
(turn on if you'll be sure oscam-svn is online and updateable!)

v.0.6.4
- onlinecheck small fix
- mainmenu: 7-7 "easy-specials/Get-oscamSVN-Backup" added

v.0.6.4a
- onlinecheck next fix
- (x)do_onlinecheck set to default: ON
- libusb fixxed again? please test

v.0.6.4b
- libusb next fix (please try!)

v.0.6.4c
- small typo fixxed

v.0.6.4d
- buildALL: PCSC build fixxed

v.0.6.4e
- oscam-http error fixxed
(will now auto get new by svn-up!)

v.0.6.4f
- redefined pcsc-warning fixxed

v.0.6.5
- easy-specials: 7-8 create MY_OSCAMS-megapack added
- some small code fixxes
- BUILD_OLD folder added
- some path/foldernames optimized

v.0.6.5a
- oupdate EasyBuild.conf Fritzbox fixxed
- some path/foldernames optimized

v.0.6.5b
- easy-script code optimized
(Folder *_OLD no longer needed, you can simply manual rm them without probs!)

v.0.6.5c
- make.sh line 25-37: there you can change default-oscam-config-paths for oscam.conf/user/server etc.
...
###########################################################
### setup here your default oscam-config paths.... ###
###########################################################
DEFAULTCONFIG="/var/keys"
DREAMBOXCONFIG="/var/keys"
AZBOXCONFIG="/var/keys"
COOLSTREAMCONFIG="/var/tuxbox/config"
DDWRTCONFIG="/usr/local/etc"
DOCKSTARCONFIG="/usr/local/etc"
FONERACONFIG="/usr/local/etc"
FRITZBOXCONFIG="/var/media/ftp/uStor01/addons/oscam"
NSLU2UNSLUNGCONFIG="/usr/local/etc"
PCCONFIG="/usr/local/etc"
PPC_DB2_DREAMCONFIG="/var/tuxbox/config"
SH4_DVBAPICONFIG="/var/keys"
SH4_STAPICONFIG="/data/keys"
###########################################################
###########################################################
...

v.0.6.5d
- 7-8 easy-specials: create megapack fixxed

v.0.6.5e
- code from v.0.6.5c (setup default conf-paths) MOVED NOW TO: ../oscam-svn/EasyBuildScript/EasyBuild.conf
(please change if needed paths than in EasyBuild.conf!)

v.0.6.5f
- onlineupdate small fix

v.0.6.5g
- onlineupdate small fix2

v.0.6.6
- onlineupdate small fix3
if you say "N" on question: "Activate DEFAULT EasyBuild.conf"... it's your own risk if not all working,
if "N" and build-error you must manual del EasyBuild.conf and restart make.sh again!

- pcsc updated to v1.7.0 (thx thE_29)
(pcsc-values can be changed to old in EasyBuild.conf:
###PCSC##########
PCSCVERSION=1.7.0
PCSCDLID=3527
CCIDVERSION=1.4.2
CCIDDLID=3518
###OLD_PCSC#######
#PCSCVERSION=1.6.4
#PCSCDLID=3337
#CCIDVERSION=1.4.0
#CCIDDLID=3333
################## )
(if "external_Libs"-folder already exists... please del them manually before you start make.sh for using new PCSC!)

- 7-8 create megapack optimized

- toolchaind dd-wrt renamed to DDWRT

- many code fixxes part1

v.0.6.6a
- many generall code fixxes part2

v.0.6.6b
- many generall code fixxes part3
- openssl revert to v.0.9.8 (most platformas actual using it!)
- all platforms now also have libcrypto.a AND libcrypto.so (thx thE_29)
(if libcrypto.so on your os allready exists: dont replace them with these *.so generated by easy-script!)
(for using old way only *.a (oscam-binary would be bigger): del *.so on "../external_libs/os/lib", an build again!)
(with *.so oscam-binary would be smaller! )
(if you have already build before.... please del "../external_libs/os" before start 1time v.0.6.6b!)

v.0.6.6c
- many generall code fixxes/optimized part4

v.0.6.6d
- (0)-OSCam-Setup-MainSetup: (x) with_libcrypto_so -libcrypto.so en/-disable-option added (default enabled)!
(x) = libcrypto.so.0.9.8 used instead of libcrypto.a (oscam binary smaller but needed libcrypto.so.0.9.8 on running platform!)
( ) = libcrypto.a used instead of libcrypto.so.0.9.8 (oscam binary bigge but NOT needed libcrypto.so.0.9.8 on running platform!)

v.0.6.7
- many generall code fixxes/optimized part5

v.0.6.7a
- many generall code fixxes/optimized part6
- ddwrt-pcsc build fixxed

v.0.6.7b
- many generall code fixxes/optimized part7
- ccid build fixxed

v.0.6.8
- TP-LINK MIPS-AR71xx platform added (thx thE_29)

v.0.6.8a
- secure check for EasyBuild.conf + .../external_LIBS is actual
- many generall code fixxes/optimized part8
- with_ssl build fixxed (now small binaries available too! (x) wit_libcrypto.so must be acvitve!)
- fritzbox 7390 outsourced to sep. folder (build(fritzbox7390, external_libs/7390) please test!

v.0.6.8b
- many generall code fixxes/optimized part8

v.0.6.8c
- many generall code fixxes/optimized part9
- ccid-ddwrt fixxed

v.0.6.8.d
- fritzbox 7390 build fixxed

v.0.6.8e
- libcrypto.off fixxed

v.0.6.8f
- ddwrt: libcrypto.off fixxed + libcrypto build fixxed



Download

[cancam]

Hi I am looking for exacetly this but the latest link does not work link for v0.6.8f Regards

[dMd]

v.0.6.9
- coolstream: dvbapi fixxed

v.0.6.9a
- coolstream: libnxp.so fixxed

v.0.6.9b
- ASUS-WL*** Platform added (only static, K24 ok, K26 untestet (K26 setable by Main-Setup)!!!)
- many generall code fixxes/optimized part11

v.0.6.9c
- buildall: fritzbox fixxed
- logfiles deactivated. All output now in terminal. On error see terminal-output

v.0.6.9d
- coolstream: fix libnxp.so sym doublecheck

v.0.7.0
- coolstream: pcsc fixxed (thx thE_29!)

v.0.7.0a
- fritzbox ALL update!
(gcc now 4.6 so old user must del their chain(s) in "../toolchains" and also easybuild.conf and start from beginning!)

v.0.7.0b
- small static-build fix

v.0.7.0c
- with_ssl build fix

v.0.7.0d
- many generall code fixxes/optimized part12

v.0.7.0e
- many generall code fixxes/optimized part13
- megapack: libssl added

v.0.7.0f
- webif OIA modfied (showing now under configuration -> files, Default are normal!)
- add file /oscam-svn/EasyBuildScript/EasyScript.patch (needed for patching webif-oia!)
  (you also can easily put your own diff's in too if you have one ;) )
- many generall code fixxes/optimized part14
- ddwrt default without libusb/pcsc: lrt + ldl added (please test if cccam login ok now!)
- oscam binary easier identifying by name: OSCAM 1.00-unstable_EasyBuild_svn build #

v.0.8.0
- pcsc updated to 1.7.2
- ccid updated to 1.4.3
- EasyScript.patch updated
- Show Memory in Webif now optional, for turn on set: 0-mainsetup -> (X) Show_MEM (default off)
(thx gorgone)

If not 1st time build:
Please del "../oscam-svn/external_LIBS" folder and also del "/oscam-svn/EasyBuildScript/EasyBuild.conf" !!!
than do svn-update by: 1-y-y

OTHERWAY IT WON'T WORK!!

v.0.8.0a
- EasyScript.patch fixxed
- Easyconf check updated

v.0.8.0b
- EasyScript.patch del (not longer needed!)

v.0.8.0c
- webif oscam-http.h: Headline Size corrected to 15px

v.0.8.0d
- globals.h:
  clientmaxidle-entry corrected (max 9999 default)
  clientimeout-entry corrected (max 99999 default)
  take care to set both to your preferred timeout in your config!
  (if nothing set 9999/99999 are default!!!!)
- oscam-http.c:
  webif-shutdown-restart corrected (set restarttime to 5 seconds for better refresh without 404)

v.0.8.0e
- many generall code fixxes/optimized part14
- get toolchains dreambox+nslu2unslung fixxed.
- add toolchain ppc-tuxbox-dbox2_old for: PPC Tuxbox Old (Dbox2, Dreambox 500/600)
  (first do: get toolchain 4-13 than build-single 2-14, 1st time chain will build-finished and that takes some time ca 20mins up to 1h))
  PLEASE TEST IF BINARY WORKING ON DBOX2!

v.0.8.0f
- showbuild_* off on fixxed

v.0.8.1
- clientmaxidle revert to 120 also clienttimeout reverted (fixed by Admin on svn, so patch no longer needed! many thx!!)
- dockstar: set build to static so on openwrt+debian working

v.0.8.1a
- webif: optional with Logo -> 0-mainsetup (x) With_WebLogo, default OFF (NO LOGO)
  (x) Webif must also active for use!
  if you want use different logo: edit make.sh line24 -> MYWEBIFLOGO="http://your/favorite/logo"

v.0.8.1b
- asuwsl: build libusb/pcsc check if always there fixxed

v.0.8.1c
- mainsetup 0 -> (x)With Loadbalancing  added, default ON!

v.0.8.1d
- dvbapi ON/OFF fixxed
- mainsetup 0 -> (x) AntiDisconnectClient->camd35 only add, default OFF!
(if activated and using camd35-proto clients stay connected, unitresting what clientmaxidle= say!)

v.0.8.1e
- 0-mainsetup: (x) LCD support added, default off

v.0.8.2
- dynamic threads oscam svn support added.
for use set make.sh row 26/27:
    #MYSVN="branches/dynamic-threads"
    MYSVN="trunk"
to
    MYSVN="branches/dynamic-threads"
    #MYSVN="trunk"
NO support, no questions will be answered if using these test-branch for build!
do not mixxing by svn up the normal trunk with dynamic!

v.0.8.2a
- check linux-packages: cvs added

v.0.8.2c
- sh4-stapi: libstapi v.0.8a added (>=#5773) (thx _network)

v.0.8.2d
- OIA build fixed

v.0.8.2e
- general code fixxed part 15

v.0.8.2f
- create megapack: tar.gz renamed

v.0.8.3
- create megapack: some small gz fix on fritzbox
- fix menuentry/code against ppc-dreambox
- ../EasyBuildScript/EasyBuild.info added (detailed overwiev of supportet receivers/routers etc...)
(hopefully ok, if not please give me a note on streamboard @
http://streamboard.gmc.to/wbb2/thread.php?goto=firstnew&threadid=28878
)

v.0.8.3a
- ppc_old dbox2/dream, ssl deactivated! won't work on these old lib*.0.9.7!

v.0.8.3b
- build all: dvbapi/stapi on/off first round fixxed

v.0.8.3c
- get nslu2unslung chain fixxed
- new repository(git) for ppc_old added (old cvs.tuxbox.org down!) [thx seife!)

v.0.8.3d
- oscam-svn-rev > 5620 showWebLogo fixxed

v.0.8.3e
- oscam dynamic build fix ppc-dream

v.0.8.3f
- oscam dynamic build fix ppc-dream update

v.0.8.3g
- oscam unstable: webif-version-info size fixxed

v.0.8.4
- oscam dynamic build fix i686 libusb (thx _network)

v.0.8.4a
- sh4 build fixxed

v.0.8.4b
oscam unstable: version update to 1.20

v.0.8.4c
- add stable 1.10rc build:
make.sh line23-29:
______________________________________________
### dynamic-threads SVN ###
#MYSVN="branches/dynamic-threads"
### unstable-trunk SVN ###
MYSVN="trunk"
### stable SVN ###
#MYSVN="tags/1.10"
#############################################
_______________________________________________
remove "#" for your preferred build BUT DONT MIX IT!
always use for each MYSVN an empty folder and place make.sh in than do 1-Y !!!

v.0.8.4d
- ALL: remove anti-disconnect from config (not longer working)

v.0.8.4e
o-update ALL: fix MYSVN= if not default!

v.0.8.4f
- ALL: build fixxed

v.0.8.4g
- ALL: build fixxed part2

v.0.8.5
- config: ipv6support (WebIf IPv6 support) added (experimental see timeline)

v.0.8.5a
- oscam-setup->mainsetup fixxed

v.0.8.5.b
- fritzbox70**/71**/72**: freetz-trunk-gcc updated from 0.9.29 to 0.9.31.1 so please del old "../oscam-svn/toolchains/freetz-trunk" also del "easybuild.conf" and "external_LIBS/Fritzbox" and rebuild!
or revert on make.sh to old:
# old number
#FRITZGCCNUMBER="0.9.29"
# new number
FRITZGCCNUMBER="0.9.31.1"

v.0.8.5c
- fritzbox build: little cosmetic

v.0.8.5d
- fritzbox7390: set back to correct gcc 0.9.29
# old number
#FRITZGCCNUMBER="0.9.29"
# new number
FRITZGCCNUMBER="0.9.31.1"
FRITZGCCNUMBER7390="0.9.29"

v.0.8.5e
- fritzbox7390: little cosmetic

v.0.8.6
- fritzbox build: seperated 7140/70 + 7240/70 + 7390
- new entry in 0-oscam-setup -> FritzboxSetup
  please activate there your preffered fritzbox, than 4-get_toolchains and build for them by 2-2.
  (note for 7240/70: take care you have also updated your Fritzbox-Firmware to actual ones(uclibc0.9.31.1)! if not oscam binary can give segfaults!)

v.0.8.6a
- pcsc updated to 1.7.4
- ccid updated to 1.4.4
(please del external_LIBS -folder and easybuild.conf than start make.sh again for using new pcsc/ccid)
easybuild.conf:
###PCSC##########
PCSCVERSION=1.7.4
PCSCDLID=3598
CCIDVERSION=1.4.4
CCIDDLID=3579

v.0.8.6b
- all boxes with internal-CR "SCSI_DEV" now generally activated!(dreambox, azbox, coolstream, ppc-dreambox, ppc-old-dreambox/dbox2)

v.0.8.6c
- DEV_SCI SPECIAL for sh4 boxes add (see main-setup!)
  (if need sh4-internal-CR support activate: ONLY sh4 entry, else NOT-SH4!)
  on build-all for ALL sh4 SCI is off so if needed use singelbuild-option ONLY!

v.0.8.6d
- DEV_SCI_SH4 fixxed

Orice versiune oscam-easy-build poate fi descarcata de  aici :
http://www.streamboard.tv/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2
(necesita logare)

[dMd]

v.0.8.6e
- WD(LX)TV LIVE Platform added, please test if binaries working on it!!!

v.0.8.7
- wdtv hopefully fixxed (switched toolchain to wdtvtools-svn!)
- some small code cleanup

v.0.8.7a
- coolstream int. Reader fixxed
- wdtv chain for test linked to dmm-mipsel-toolchain
  (for wdtv build you must 4->get-toolchains-dm-mipsel done!
  static-build-wdtv only possible WITHOUT libusb!)
  for wdtv please del:
  /oscam-svn/EasyBuildScript/EasyBuild.conf
  /oscam-svn/BUILD/WDTV
  /oscam-svn/external_LIBS/WDTV
- oscam.to svn-mirror added
  (will auto used if streamboard svn down!)

v.0.8.7b
- svn mirror fixxed

v.0.8.7c
- oscam rev# name fixed

v.0.8.7d
- buildall fixxed
- wdtv fixxed

oscam-easy-build.v0.8.7d.zip

[lao]

oscam-easy-build.v0.8.7 e

v.0.8.7e
- ubuntu 11.0 fix

Download