focus si tvr in oscam puse in vu+duo

**franta** · 25-02-11, 00:31

de ceva vreme vreau sa bag in vu un card de focus si unu de tvr dar nu reusesc ,
configurile pe care le-am combinat au iesit vraza,
poate sa ma ajute cineva cu niste configuri facute pt focuss si tvr in oscam .
mentionez ca nu vreau sa renunt la serveru meu de cccam
am incercat sa bag in oscam tvr- ul si sa pastrez in cccam focusu nu mia esit
deci daca aveti ceva sfaturi va rog sa ma ajutati

conf

[global]
usrfile = /var/log/oscamusr.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/oscam/cw
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 10
fallbacktimeout = 5
clientmaxidle = 150
cachedelay = 2500
bindwait = 150
netprio = 1
unlockparental = 0
nice = 1
serialreadertimeout = 1500
maxlogsize = 10
WaitForCards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 7
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 1000
lb_reopen_seconds = 200
resolvegethostbyname = 1

[newcamd]
port = xxxx@0500:025900
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[newcamd]
key = 1111111111111111111111111111
port = yyyy@0B02:000000

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = test, focus
pmt_mode = 0

[webif]
httpport = xxxx
httpuser = root
httppwd = vuplus
httprefresh = 10
httpallowed = 1.0.0.1-254.254.254.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

server

[reader]
label = slot1
enable = 1
protocol = internal
device = /dev/sci1
services = tvr
caid = 0500
boxid =
detect = cd
mhz = 418
cardmhz = 418
ident = 0500:025900
group = 1
emmcache = 1,3,2
lb_weight = 150

[reader]
label = focus
protocol = slot0
detect = CD
device = /dev/sci0
group = 2
emmcache = 1,3,2
blockemm-u = 1
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
services = Focussat
caid = 0B02
ident = 0B02:000000
provid = 000000

user

[account]
user = test
pwd = test
disabled = 0
group = 1
uniq = 0
sleep = 0
monlevel = 1
au = 1
services = tvr
caid = 0500
ident = 0500:025900
cccmaxhops = 3
keepalive = 1
numusers = 0
penalty = 0

[account]
user = focus
pwd = focus
group = 1
uniq = 2
au = focus
services = Focussat
caid = 0B02
ident = 0B02:000000
numusers = 1

este a doua oara gand incerc sa umblu cu oscamu , pt o perioada am incercat sai dau de cap de unu singur ,
daca puteti sa ma ajutati astept idei
multumesc

**zappa** · 25-02-11, 07:19

Incearca sa setezi frecventa cardului tvr la 357 Mhz si a celuilalt card la 600 Mhz.

**franta** · 25-02-11, 23:50

ok e complicat pt mine sa fac configuratia descrisa mai sus
am un dm 500s vreau sal folosesc ca reader , am pus oscam 4725, am loat setingsurile lui @parpaneata puse aici: http://sateliti.info/showthread.php?...l=1#post161174 si miam dat linie N care am puso in ccccam de pe vu dar nu deskide nimic.
iata ce am in oscamu de pe 500s

conf

[global]
usrfile = /var/log/oscamusr.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/oscam/cw
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 10
fallbacktimeout = 5
clientmaxidle = 150
cachedelay = 2500
bindwait = 150
netprio = 1
unlockparental = 0
nice = 1
serialreadertimeout = 1500
maxlogsize = 10
WaitForCards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 7
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 1000
lb_reopen_seconds = 200
resolvegethostbyname = 1

[newcamd]
port =2000@0500:025900
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = test
pmt_mode = 0

[webif]
httpport = xxxx
httpuser = wwww
httppwd = zzzzz
httprefresh = 10
httpallowed = 1.0.0.1-254.254.254.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

server

[reader]
label = TVRomania
enable = 1
protocol = internal
device = /dev/sci0
services = tvr
caid = 0500
boxid =
detect = cd
mhz = 418
cardmhz = 418
ident = 0500:025900
group = 1
emmcache = 1,3,2
lb_weight = 150

user

[account]
user = test
pwd = test
disabled = 0
group = 1
uniq = 0
sleep = 0
monlevel = 1
au = 1
services = tvr
caid = 0500
ident = 0500:025900
cccmaxhops = 11
keepalive = 1
numusers = 0
penalty = 0

dvbapi

[account]
user = test
pwd = test
disabled = 0
group = 1
uniq = 0
sleep = 0
monlevel = 1
au = 1
services = tvr
caid = 0500
ident = 0500:025900
cccmaxhops = 11
keepalive = 1
numusers = 0
penalty = 0

services

[tvr]
caid = 0500
provid = 025900,025910,FFF720
srvid = 000F,0001,0002

in cccam linia e activa , imi arata un card dar nu deskide nimic
ceva sfaturi?, cum spuneam nu ma pricep cu oscamu...

mai adaug ca eu nam cablu de la antena bagat in dm500s , conteaza ? in webinf im zice ca :

1970/01/01 1:37:26 31825B50 r tvromania card detected
1970/01/01 1:37:26 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
1970/01/01 1:37:27 31825B50 r ATR: 3F 77 18 00 00 C2 14 00 C1 68 90 00
1970/01/01 1:37:29 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.18 Mhz
1970/01/01 1:37:30 31825B50 r type: Viaccess (standard atr), caid: 0500, serial: xxxxxxxxxxxxx
1970/01/01 1:37:31 31825B50 r providers: 3 (FFF720,025900,025910)
1970/01/01 1:37:31 31825B50 r [viaccess-reader] ready for requests
1970/01/01 1:37:31 31825B50 r found cardsystem viaccess
1970/01/01 1:37:31 31825B50 r [viaccess-reader] card detected
1970/01/01 1:37:31 31825B50 r [viaccess-reader] serial: xxxxxxxxxxxxx
1970/01/01 1:37:31 31825B50 r provider: 1, id: FFF720, name: TVR, sa: BF645E2D, geo: empty
1970/01/01 1:37:31 31825B50 r provider: 2, id: 025900, name: TVR 1, sa: BF645E2D, geo: FF FF FF FF
1970/01/01 1:37:31 31825B50 r class: 0A, expiry date: 2011/02/24 - 2011/09/28
1970/01/01 1:37:31 31825B50 r class: 0A, expiry date: 2011/02/08 - 2011/09/28
1970/01/01 1:37:31 31825B50 r class: 0A, expiry date: 2010/12/23 - 2011/02/23
1970/01/01 1:37:31 31825B50 r class: FF, expiry date: 2010/08/30 - 2010/09/28
1970/01/01 1:37:31 31825B50 r class: 0A, expiry date: 2010/08/27 - 2011/02/23
1970/01/01 1:37:31 31825B50 r class: 0A, expiry date: 2010/08/18 - 2011/02/23
1970/01/01 1:37:31 31825B50 r provider: 3, id: 025910, name: TVR 2, sa: BF645E2D, geo: FF FF FF FF
1970/01/01 1:37:31 300162B0 s init for all local cards done
1970/01/01 1:37:31 300162B0 s anti cascading disabled
1970/01/01 1:37:31 32025B50 c plain dvbapi-client granted (test, au=auto (1 reader))
1970/01/01 1:37:31 32025B50 c dvbapi: 3 entries read from oscam.dvbapi
1970/01/01 1:37:31 32825B50 c client connected to 20000 port
1970/01/01 1:37:31 32825B50 c encrypted newcamd: 2000-client 192.168.178.24 granted (test, au=auto (1 reader))
1970/01/01 1:37:31 32825B50 c user test authenticated successfully (CCcam)
1970/01/01 1:37:31 32825B50 c AU enabled for user test on reader tvromania

---------- Post added at 21:50 ---------- Previous post was at 21:25 ----------

am bagat cablu de antena si min deskide cu oscam tvr 2 si tvr1 tvr hd se aude doar sunetu ,
deci merge doaar ca numi merge linia n

**cristilamb** · 26-02-11, 00:58

Pai, parca cccam nu deschide din cardul tvr, daca dai din dm500 linie catre vu, da cumva sa deschizi tot cu oscam.Pe dm iti deschide tvr1 si 2 pt ca ai dvbapi pe on.
Nu stiu prea bine, zic si eu...

**fery21** · 26-02-11, 03:14

deocamdata dvbapi nu lucreaza pe proxi din pacate

**bumbu** · 26-02-11, 21:34

Doar ca info, vezi ca nu mai este necesar sa scrii card mhz si mhz. Asi ia oscamul automatic ce are nevoie, mai ales in receivere Sci0 sau Sci1.
Numai bine

**franta** · 06-03-11, 22:27

Originally Posted by cristilamb

Pai, parca cccam nu deschide din cardul tvr, daca dai din dm500 linie catre vu, da cumva sa deschizi tot cu oscam.Pe dm iti deschide tvr1 si 2 pt ca ai dvbapi pe on.
Nu stiu prea bine, zic si eu...

salut poti sa ma ajuti sami spui cum fac o linie n sa fie din primu recever care are dvbapi activ sa fie reader in cel deal 2 lea reciver,
se paote aasa ceva sau nam inteles eu bine

**qwess** · 06-03-11, 22:51

in server(primul receiver):
oscam.conf:

Code:

[newcamd]
port                          = 34000@0500:025900,FFF720,025910;34001@0B02:000000
key                           = 0102030405060708091011121314
allowed                       = 
keepalive                     = 1
mgclient                      = 0

oscam.user:

Code:

[account]
user                          = receiver2
pwd                           = receiver2
disabled                      = 0
group                         = 1,2,3... se alege readerul la care are acces
hostname                      = 
monlevel                      = 4
au                            = 1
services                      = 
caid                          = 
cccmaxhops                    = 3
cccreshare                    = 2
cccignorereshare              = 0
keepalive                     = 1

in cel de-al 2 lea receiver:
oscam.server

Code:

[reader]
label                         = receiver1
enable                        = 1
protocol                      = newcamd
device                        = ip receiver 1,34000 sau 34001 depinde ce card vrei sa iei din primul
key                           = 0102030405060708091011121314
user                          = receiver2
password                      = receiver2
services                      = 
inactivitytimeout             = 2
reconnecttimeout              = 2
fallback                      = 1
caid                          = 0B02 sau 0500
ident                         = 0B02:000000 sau 0500:025900,025910,FFF720
group                         = 2 se alege grupul!
emmcache                      = 1,3,2
lb_weight                     = 100

**franta** · 08-03-11, 20:43

am incercat dar nu am reusit sal fac sa mearga.
poate fac eu ceva gresit, in fine o sal bag in cam viaaces si gata.

Thread: focus si tvr in oscam puse in vu+duo

Thread Tools

Display

focus si tvr in oscam puse in vu+duo

Posting Permissions