OSCAM pe router topex

[stargate]

sa nu deschizi acelasi port pentru doua aparate ... eu am intampinat probleme pe un router d-link care nu vroia sa deschida acelasi port pentru doua servere .

[sorin8m]

E ceva normal ca pe 2 ip-uri diferite din reteaua proprie sa nu poti deschide acelasi port. Pui 2 porturi diferite.

[battila]

Multumesc pentru ajutorul vostru.
In sfarsit am reusit sa rezolv

[sorin8m]

Ca sa nu deschid al theard o sa scriu aicea.
Pe router am openwrt kamikaze 8.09.2, kernel 2.4.
Ma chinui de ceva timp sa pun, smargo+ sau USB SmartMouse, si sa pot citi direct in router cardul. Problema e ca nu am rausit de aia si scriu aicea. Am pus oscam pe topex totul frumos. Ca sa mearga cititorul nu trebuie instalate drivere de de usb 2.0 si ohci (care tin tot de usb 2.0). Am facut totul frumos se conecteaza doar cu smargo in el fara card in smargi si imi da urmatorul log:
2009/12/29 15:28:23 400 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4733 (mips-wrt54g-linux)
2009/12/29 15:28:23 400 s version=1.00-unstable_svn, build #4733, system=mips-wrt54g-linux
2009/12/29 15:28:23 400 s client max. idle=120 sec, debug level=0
2009/12/29 15:28:23 400 s max. logsize=102400 Kb
2009/12/29 15:28:23 400 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=150 ms
2009/12/29 15:28:23 400 s auth size=4976
2009/12/29 15:28:23 400 s Cannot open file "/opt/var/etc/oscam.services" (errno=2)
2009/12/29 15:28:23 400 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2009/12/29 15:28:23 400 s signal handling initialized (type=sysv)
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.srvid" (err=2), no service-id's loaded
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.provid" (err=2), no provids's loaded
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2009/12/29 15:28:23 400 s monitor: initialized (fd=10, port=988)
2009/12/29 15:28:23 400 s camd33: disabled
2009/12/29 15:28:23 400 s camd35: disabled
2009/12/29 15:28:23 400 s cs378x: disabled
2009/12/29 15:28:23 400 s newcamd: initialized (fd=11, port=12000, crypted)
2009/12/29 15:28:23 400 s CAID: 0500
2009/12/29 15:28:23 400 s provid #0: 000000
2009/12/29 15:28:23 400 s provid #1: 000000
2009/12/29 15:28:23 400 s cccam: disabled
2009/12/29 15:28:23 400 s radegast: disabled
2009/12/29 15:28:23 400 s http disabled
2009/12/29 15:28:23 400 s creating thread for device /dev/usb/tts/0
2009/12/29 15:28:23 803 r reader thread started (thread= 803, label=mouse, device=/dev/usb/tts/0, detect=cd, mhz=357, cardmhz=357)
2009/12/29 15:28:23 400 s loadbalancer: can't read from file /tmp/.oscam/stat
2009/12/29 15:28:23 400 s waiting for local card init
2009/12/29 15:28:25 400 s init for all local cards done
2009/12/29 15:28:25 400 s anti cascading disabled

totul pare frumos, bag cardul n smargo si cand surpriza imi apare urmatorul log:
2009/12/29 15:28:23 400 s version=1.00-unstable_svn, build #4733, system=mips-wrt54g-linux
2009/12/29 15:28:23 400 s client max. idle=120 sec, debug level=0
2009/12/29 15:28:23 400 s max. logsize=102400 Kb
2009/12/29 15:28:23 400 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=150 ms
2009/12/29 15:28:23 400 s auth size=4976
2009/12/29 15:28:23 400 s Cannot open file "/opt/var/etc/oscam.services" (errno=2)
2009/12/29 15:28:23 400 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2009/12/29 15:28:23 400 s signal handling initialized (type=sysv)
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.srvid" (err=2), no service-id's loaded
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.provid" (err=2), no provids's loaded
2009/12/29 15:28:23 400 s can't open file "/opt/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2009/12/29 15:28:23 400 s monitor: initialized (fd=10, port=988)
2009/12/29 15:28:23 400 s camd33: disabled
2009/12/29 15:28:23 400 s camd35: disabled
2009/12/29 15:28:23 400 s cs378x: disabled
2009/12/29 15:28:23 400 s newcamd: initialized (fd=11, port=12000, crypted)
2009/12/29 15:28:23 400 s CAID: 0500
2009/12/29 15:28:23 400 s provid #0: 000000
2009/12/29 15:28:23 400 s provid #1: 000000
2009/12/29 15:28:23 400 s cccam: disabled
2009/12/29 15:28:23 400 s radegast: disabled
2009/12/29 15:28:23 400 s http disabled
2009/12/29 15:28:23 400 s creating thread for device /dev/usb/tts/0
2009/12/29 15:28:23 400 s loadbalancer: can't read from file /tmp/.oscam/stat
2009/12/29 15:28:23 400 s waiting for local card init
2009/12/29 15:28:23 803 r reader thread started (thread= 803, label=mouse, device=/dev/usb/tts/0, detect=cd, mhz=357, cardmhz=357)
2009/12/29 15:28:25 803 r mouse card detected
2009/12/29 15:28:29 803 r ATR: 3F 77 18 00 00 C1 14 01 A2 68 90 00
2009/12/29 15:28:31 803 r Warning: D=0 is invalid, forcing D=1
2009/12/29 15:28:33 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2009/12/29 15:28:38 803 r card system not supported
2009/12/29 15:28:38 803 r Normal mode failed, reverting to Deprecated Mode
2009/12/29 15:28:42 803 r ATR: 3F 70 3F 77 18
2009/12/29 15:28:43 803 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2009/12/29 15:28:44 803 r card system not supported
2009/12/29 15:28:44 803 r card initializing error
2009/12/29 15:28:45 400 s init for all local cards done
2009/12/29 15:28:45 400 s anti cascading disabled

Daca cineva a rausit sau are idei si sugestii cu drag le ascult si le incerc.

[prodigy]

incearca sa citesti cardul si cu altceva, exemplu: newcs, sbox [...]

[battila]

Salutari,


O problema,
NU pot sa setez monitorul ca sa pot sa accesez si de pe alte calculatoare prin http.
Adica, la dyndns am bagat un no-ip.Dar nu pot sa accesez.Intrebarea mea este ca trebuie sa clarific ip rangul?sau sa sterg de la HTTP allowed toate si sa-l las gol acolo?

[fery21]

Desigur ca se poate fowar-dezi portul web de la oscam, si in config la linia

httpallowed = 127.0.0.1,0.0.0.0-0.0.0.0,dyndns.org

se adauba hostul servaru-lui sau ip fix dupa caz
Atenpie la webinfo user si passwd!!!

[battila]

Salut,

Nici asa nu functioneaza.Poate sa fie problema ca am no-ip si nu dyndns?

[fery21]

pune ip care il ai mometan activeaza web info

[battila]

Nici asa.Portul este deschis

[stargate]

ai noroc ca nu am drept de moderare aici ca sa vezi ce mmmmmm faceai

[resofty]

pai normal ca nu merge ca nu ai portul web forwardat spre exterior.
fai forward la fel ca si la portul cccam.

[battila]

Salut resofty,

Am forwardat si am si verificat.

[battila]

Buna,

Am deschis portul.Am introdus un no-ip la Http Dyndns.La http allowed am scris ip-ul meu extern.Dar tot nu merge.
Cineva stie vreo solutie?

[battila]

Salut,

Cineva stie ca cate linii poate sa suporta serverul OSCAM?