HD+ in oscam

[franta]

intrebare:
se poate pune cardu hd+ intr-un server de oscam facut pe dm500s?
am mutat fisierele din vu in dm 500 dar imi da eroare la reader,
daca se poate, trebuie facut ceva setari deosebite fata de de configu puspe vu

n-am reusit sa rezolv eroarea care , imi apare in vu

2011/05/15 13:48:12 2B8CF4B0 r ERROR in IO_Serial_Read errno=22
2011/05/15 13:48:12 2B8CF4B0 r ERROR, function call IO_Serial_Read (reader, timeout + IFD_TOWITOKO_TIMEOUT, size, buffer) returns error.
2011/05/15 13:48:12 2B8CF4B0 r ERROR, function call Phoenix_Receive (reader, data, size, reader->read_timeout) returns error.
2011/05/15 13:48:12 2B8CF4B0 r ERROR, function call Protocol_T0_Command returns error.
2011/05/15 13:48:12 2B8CF4B0 r [nagra-reader] CamStateRequest failed
2011/05/15 13:48:19 2BCCF4B0 c nmr(): len=2, errno=0
2011/05/15 13:48:19 2BCCF4B0 c received 5 bytes from client

si vreau sa mut cardu in dreambox 500

[qwess]

in principiu sunt aceleasi setari, difera doar cele de ip din oscam.conf.
verifica sa nu fie cumva cititorul ocupat cu alte teburi.
ce fel de eroare zici ca da in dm, inteleg ca eroarea postata vine din VU?

[franta]

asta eun log din dm500

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 01:01:18 1970
-------------------------------------------------------------------------------
1970/01/01 1:01:18 300162B0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4725 (powerpc-tuxbox-linux)
1970/01/01 1:01:18 300162B0 s version=1.00-unstable_svn, build #4725, system=powerpc-tuxbox-linux, nice=-1
1970/01/01 1:01:18 300162B0 s client max. idle=60 sec, debug level=0
1970/01/01 1:01:18 300162B0 s max. logsize=256 Kb
1970/01/01 1:01:18 300162B0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
1970/01/01 1:01:18 300162B0 s auth size=4976
1970/01/01 1:01:18 300162B0 s services reloaded: 0 services freed, 1 services loaded
1970/01/01 1:01:18 300162B0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
1970/01/01 1:01:18 300162B0 s signal handling initialized (type=sysv)
1970/01/01 1:01:18 300162B0 s 8 service-id's loaded
1970/01/01 1:01:18 300162B0 s 8 tier-id's loaded
1970/01/01 1:01:18 300162B0 s 1 provid's loaded
1970/01/01 1:01:18 300162B0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
1970/01/01 1:01:18 300162B0 s monitor: disabled
1970/01/01 1:01:18 300162B0 s camd33: disabled
1970/01/01 1:01:18 300162B0 s camd35: disabled
1970/01/01 1:01:18 300162B0 s cs378x: disabled
1970/01/01 1:01:18 300162B0 s newcamd: initialized (fd=7, port=20000, crypted)
1970/01/01 1:01:18 300162B0 s CAID: 1843
1970/01/01 1:01:18 300162B0 s provid #0: 003411
1970/01/01 1:01:18 300162B0 s cccam: disabled
1970/01/01 1:01:18 300162B0 s radegast: disabled
1970/01/01 1:01:18 300162B0 s http thread started
1970/01/01 1:01:18 300162B0 s creating thread for device /dev/sci0
1970/01/01 1:01:18 300162B0 s waiting for local card init
1970/01/01 1:01:18 31025B50 h HTTP Server listening on port 9999
1970/01/01 1:01:18 31825B50 r reader thread started (thread=31825B50, label=hdplus, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
1970/01/01 1:01:19 31825B50 r hdplus card detected
1970/01/01 1:01:19 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
1970/01/01 1:01:20 31825B50 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
1970/01/01 1:01:21 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
1970/01/01 1:01:23 31825B50 r detect native nagra card
1970/01/01 1:01:31 31825B50 r card system not supported
1970/01/01 1:01:31 31825B50 r Normal mode failed, reverting to Deprecated Mode
1970/01/01 1:01:31 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
1970/01/01 1:01:32 31825B50 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
1970/01/01 1:01:33 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
1970/01/01 1:01:35 31825B50 r detect native nagra card
1970/01/01 1:01:44 31825B50 r card system not supported
1970/01/01 1:01:44 31825B50 r card initializing error
1970/01/01 1:01:44 300162B0 s init for all local cards done
1970/01/01 1:01:44 300162B0 s anti cascading disabled
1970/01/01 1:01:44 32025B50 c client connected to 20000 port
1970/01/01 1:01:44 32025B50 c Connection closed to client
1970/01/01 1:01:44 32025B50 c thread 32025B50 ended!
1970/01/01 1:01:50 32025B50 c client connected to 20000 port
1970/01/01 1:01:50 32025B50 c encrypted newcamd:20000-client 192.168.178.24 granted (matei, au=on (1 reader))
1970/01/01 1:01:50 32025B50 c user matei authenticated successfully (CCcam)
1970/01/01 1:01:50 32025B50 c AU disabled for user ffff

1970/01/01 1:01:35 31825B50 r detect native nagra card
1970/01/01 1:01:44 31825B50 r card system not supported
1970/01/01 1:01:44 31825B50 r card initializing error
deci cred ca , cardu nu e recunscut de dm500, poate pt ca e un card HD

[fery21]

verifica rsakey&boxkey sa fie corecte

[Didi]

intrebare:
se poate pune cardu hd+ intr-un server de oscam facut pe dm500s?
am mutat fisierele din vu in dm 500 dar imi da eroare la reader,
daca se poate, trebuie facut ceva setari deosebite fata de de configu puspe vu

n-am reusit sa rezolv eroarea care , imi apare in vu



si vreau sa mut cardu in dreambox 500

Daca ai reusit, spume-mi te rog ce versiune de oscam ai pus, am cardul nou DH02 negru, merge pe VU insa pe 500s inca n-am reusit sa-i dau de cap....
Multumesc !

[RedPoint]

offtopic: de la care program/soft este acest screen?

[delta2k2]

Este web-interface de la oscam. Il accesezi din browser-ul de internet cu ip : port

In oscam.conf , ar trebui sa ai ceva de genul :

[webif]
httpport = 84
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254