Card Focus-no or unknow card inserted

[dMd]

Exact asta ti-am recomandat aici . .. Sid Assign...

# Configure limited list of accepted sids for smartcard
# When omitted, all sids are allowed.
# Can work together with LOADBALANCE configuration (sids which are not allowed will be automatically left out of the loadbalance)
#
# SMARTCARD SID ASSIGN : <device> <maxnumberofsids> { <sid1>, <sid2>, ... <sidn> }
#
# <device> is the reader devicenode
# <maxnumberofsids> limits the total number of sids assigned to the card (0 = use length of sid list)
# { <sid1>..<sidn> } lists the sids that are assigned to the smartcard, when omitted, <maxnumberofsids> is used to auto assign sids
#
# when <maxnumberofsids> is larger than the length of the sidlist, the remainder of the sids are auto assigned, till the list reaches <maxnumberofsids>
# Check entitlement output for realtime assignment list
#
# WARNING: when SMARTCARD SID ASSIGN config changes, restart is required before settings take effect
#
#example1: smartcard in device /dev/ttyUSB0 only handles requests for sids df3, df4, df5
#
#SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0df3,0df4,0df5 }
#
#example2: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, auto assigned in the order of occurance. A request for a 6th sid will be denied.
#
#SMARTCARD SID ASSIGN : /dev/ttyUSB0 5
#
#example3: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, 3 of which are df3, df4, df5, remaining 2 are auto assigned
#
#SMARTCARD SID ASSIGN : /dev/ttyUSB0 5 { 0df3,0df4,0df5 }


# Configure list of sids which are not to be handled by smartcard
# When omitted, all sids are allowed (or SMARTCARD SID ASSIGN list is allowed, if available)
# Don't use together with (fixed) SMARTCARD SID ASSIGN list; use one or the other, depending on which gives the shortest list
# Can work together with dynamic SMARTCARD SID ASSIGN list.
# Can work together with LOADBALANCE configuration (sids which are rejected will be automatically left out of the loadbalance)
#
#SMARTCARD SID REJECT: <device> { <sid1>, <sid2>, ... <sidn> }
#
# <device> is the reader devicenode
# { <sid1>..<sidn> } lists the sids that are to be rejected on the smartcard
#
#
#example1: smartcard in device /dev/ttyUSB0 should not handle requests for sids df3, df4, df5
#
#SMARTCARD SID REJECT: /dev/ttyUSB0 { 0df3,0df4,0df5 }