Modem 3g ZTE 637 pe openWRT??

[malefycu]

Ma chinui de o saptamana sa instalez acest modem pe un asus wl500 delux cu openWRT,nu pot trece de faza cu zeroCD,am instalat si usb-modeswitch si tot degeaba,nu imi apare configul in etc/usb-modeswitch.cfg
A incercat cineva asa ceva,sau un link cu un howto.
Am inteles ca digimobil foloseste un ZTE636,cel pe care il am eu este de la cosmote prepay banuiesc ca ar fi aceleasi setari.

[sergiu]

incearca si cum zice mai jos;ai si un link
#

Solutie care merge pt ZTE MF626 testat pe un wl500gp v1.

http://forums.whirlpool.net.au/forum...m/1205127.html

Problema este ca MF 626 apare ca CD ROM si apoi este detectat ca modem.

Deci pt a functiona pe router trebuie dezactivat Zero CD feature.Start/Control Panel/ Phone&Modem Options/Modems/ZTE proprietary modem/Properties/Advanced. Place in Extra initialisation string AT+ZCDRUN=8.Then connect using Connection Manager. Remove the MF626 Delete the string in control panel. You can reverse this process by repeating the procedure using AT+ZCDRUN=9.

In the the Asus web interface select USB Connection / Connection Mode and choose GPRS/EDGE/UMTS then Finish. Then select USB Connection /GPRS/EDGE/UMTS Config and choose the following: Username: blank Password: blank APN: zapp Dial Number: *99# USB device serial speed: 921600 USB device location ID: 1.3 USB device vendor ID: 0x19d2 USB device product ID: 0×0031 USB device packet size: 4096 Modem type: ZTE 622 then Finish.

[malefycu]

Am incercat saptamana trecuta si degeaba la 637 nu este acelasi lucru,nu se poate dezactiva zerocd din hyperterminal.