Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 4 1234 LastLast
Results 1 to 15 of 51

Thread: E2 by the ripper

  1. #1
    Banned
    Join Date
    06 Jun 2008
    Posts
    58
    Mentioned
    0 Post(s)
    Rep Power
    0

    Default E2 by the ripper

    Incet incet am ajuns sa o vedem si pe asta.

    Elite/Premium

    http://rapidshare.com/files/406526152/patch.rar.html

    Preium Plus

    http://rapidshare.com/files/406526152/patch.rar.html

    Tzin sa va anuntz ca inca nu este oficiala, mai este cate ceva de munca. Nu vede tuner, wi-fi, tasta power telecomanda nu functioneaza si o multime de crash.

    Here is make file for OE od DM 800 , 2 small diff files for sources which have to be changed ( for FB , and for priority of process for Kernel 2.6.22-19 ) and .config file for Kernel 2.6.22-19 .

    Makefile-opendreambox-1.5 ( for whole image , crosscompiler, and all lib's etc. )

    All files provided by the_ripper, thanks goes to him.


    config.rar - 0.01MB
    http://www.zshare.net/download/7823646916e73af0/
    diff.rar - 0.00MB
    http://www.zshare.net/download/7823647979c8117f/
    Makefile-opendreambox-1.rar - 0.00MB
    http://www.zshare.net/download/78236504f351da24/


    Intoarcere dela E2 la AZ

    copiare "update" in /tmp (settare a 755)
    copiare "backup_kernel" in /MMP

    in telnet (se non avete putty o simili ) :
    start->esegui -> (scrivere: ) telnet IPDECODER
    una volta loggati (root , azbox)
    digitate : cd /tmp
    in tmp, digitate: ./update /MMP/backup_kernel
    e il decoder esegue il ripristino alla predisposizione a ricevere da usb il file patch.bin (con firmware az o sempre E2)





    Notitzia este preluata de pe sif
    Last edited by le099; 13-07-10 at 11:10.

  2. #2
    Standard RSP member
    Join Date
    01 Jan 2008
    Posts
    98
    Mentioned
    0 Post(s)
    Rep Power
    60

    Default Revenire la versiunea nonE2

    Stie careva cum pot sa revin la versiunea anterioara?
    Am instalat Enigma 2 iar revenirea nu a mai fost posibila si acum apare "Booting" si atat!

  3. #3
    Standard RSP member
    Join Date
    11 Aug 2009
    Posts
    52
    Mentioned
    0 Post(s)
    Rep Power
    54

    Default Recovery Procedure

    Recovery procedure
    __________________
     
    * For all people which have a problem with fleshing Enigma 2 in AzBox , where installation stop ~58% and now have a BOOTING message on display.
    You will need :
    - Application Acronis True Image
    - E2Backup.tib
    - External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .
    Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .
    Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2
    Connect USB cable from the HDD case with Your PC.
    Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1
    Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2
    Choose Recover whole disk and partition and press next - picture 3
    Check-all whole Disk, so it means two partitions : Ext3 and Linux Swap and press next - picture 4
    Choose on which disk You will restore content, in our case DOM, and press next - picture 5
    Commit with OK - picture 6
    Choose Proceed - picture 7
    Wait for few minutes that process complete - picture 8
    When the restore of data and partitions finish, press Ok - picture 9
    now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.
    Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.
    Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.
    Installation od DDamir plugin is described in another tutorial.

    http://rapidshare.com/files/407099608/Recovery.rar.html

  4. #4
    Standard RSP member
    Join Date
    01 Jan 2008
    Posts
    98
    Mentioned
    0 Post(s)
    Rep Power
    60

    Default

    Nu a mers asa deocamdata! Cred ca va trebui sa-i rescriu flash-ul!
    Astept orice ajutor si sugestii, sunt in Timisoara.

  5. #5
    Membru de onoare
    Join Date
    08 Apr 2007
    Posts
    6,796
    Mentioned
    0 Post(s)
    Rep Power
    107

    Default

    Deci cu asta se ocupa creatorul mbox.Scuze de offtopic.
    :

  6. #6
    Banned
    Join Date
    06 Jun 2008
    Posts
    58
    Mentioned
    0 Post(s)
    Rep Power
    0

    Default

    Quote Originally Posted by radu67 View Post
    Nu a mers asa deocamdata! Cred ca va trebui sa-i rescriu flash-ul!
    Astept orice ajutor si sugestii, sunt in Timisoara.
    http://www.azboxhd.org/ripristino-az...dware-e-yamon/

  7. #7
    Standard RSP member
    Join Date
    11 Aug 2009
    Posts
    52
    Mentioned
    0 Post(s)
    Rep Power
    54

    Default

    Quote Originally Posted by radu67 View Post
    Nu a mers asa deocamdata! Cred ca va trebui sa-i rescriu flash-ul!
    Astept orice ajutor si sugestii, sunt in Timisoara.
    daca esti din timisoara gasesti sigur un sirb sa-ti traduca toata procedura de mai jos, care este o explicatie la ce am postat mai sus si care este o procedura care functioneaza sigur. un raspuns dat de telesat

    Prijatelju , umesto da pravis scene , pokusaj jos jedanput da vratis backup koji sam postavio u prvom postu u ovoj temi.

    Hajde da objasnim jos jedanput jer mislis da TI imas neku cudnu i situaciju.
    Nema tu cuda , situacija je prilicno jednostavna :
    Kad si ubacivao E2, uradio si sledece :
    1.Krirao 2 particije na DOM-u
    2.Ubacio novi kernel
    3.Kopirao fajlove od E2 na DOM-u

    Tebi je puklo na 58% u tacki 3.), sto podrazumeva da su prve dve prosle, a to znaci da je trenutno stanje u tvom azboxu :
    1.Imas novi kernel
    2.nemas sve fajlove od E2 u DOM i zato se nemoze podici box

    Resenje koje sam ponudio je prilicno jednostavno , samo moras ga odraditi kako treba , a to je - postavljen je dump mog DOM-a na kom je instalirana enigma ali koja provereno radi, i ti treba da to vratis (kako je opisano) u tvoj DOM , nakon toga , ako to odradis kako treba , dobices E2.

    Ako ti i dalje stoji BOOTING , to znaci da nisi vratio sadrzaj DOM-a i nista drugo.
    Posto je i drugima prosla procedura vracanja Dump-a od DOM-a sa E2 , to samo ukazuje da je Dump ok, sto pa znaci da je problem , kako sam vec rekao , iskljucivo i jedino kod tebe ustvari u sam proces koji ocigledno ne radis kako treba.
    I jos bih te zamolio da umestod a teras inat - da pokusas da ponovis proceduru a pre toga procitas pazljivo.
    Ako i tada ne uspe , onda pokusaj da nadjes nekoga ko se bolje razueme u ovo i da ti pomogne da resis problem, jer veruj, nema misterije , stavr je prilicno jednostavna

  8. #8
    Standard RSP member
    Join Date
    01 Jan 2008
    Posts
    98
    Mentioned
    0 Post(s)
    Rep Power
    60

    Default

    Tocmai ca procedura de mai sus nu a mers, banuiesc ca-i bushit bootloaderul!

  9. #9
    Standard RSP member
    Join Date
    11 Aug 2009
    Posts
    52
    Mentioned
    0 Post(s)
    Rep Power
    54

    Default

    cred ca e vorba despre o procedura prin serial, telesat spune:

    Potrebno je imati :
    TFTPD32
    backup_kernel
    putty
    Seriski Interface za povezivanje sa AZBoxom

    Potrebno je znati koja je IP adresa vaseg racunara, to mozete saznati ako udjete u command promt,
    znaci idete na Start pa u polje run upisete cmd i pritisnete enter, onda kucajte ipconfig i enter i dobicete info o IP adresi
    Predpostavimo da je IP adresa na vasem racunaru : 192.168.1.12 (potrebno u nastavku teksta)
    U tom slucaju biramo IP adresu za AZBox u rangu gde je IP od racunara , uzecemo recimo : 192.168.1.34

    1.Pokrenite TFTPD32
    2.Pokrenite Putty , prebacite na serial, upisite COM-port na kome je vezan vas seriski interfejs , pod Speed upisite 115200
    3.Povezite seriski interface sa AZBoxom i ukljucite AZBox
    4.Pratisnite CTRL+C da bi prekinuli bootiranje
    5.kucajte :

    setxenv y.ipaddr "192.168.1.34"
    setxenv y.gateway "192.168.1.1"
    setxenv y.subnetmask "255.255.255.0"
    net init
    load -b tftp://192.168.1.12/backup_kernel 0xb0100000
    pflash write -f 0x80000 0xb0100000 0x680000

    Sada cekate da prvo obrise deo FLASH-a , pa onda da upise novi sadrzaj.
    Ovo traje oko 5-6minuta , budite strpljivi da zavrsi i na kraju rebootajte vas AZBox.
    Ako je sve proslo kako treba, dobicete na TV-u standardni update koji vam je poznat,
    ubacite USB stick sa Oficijalnim FW-om i ubacitega kao i do sada.
    http://rapidshare.com/files/40839862...erial.rar.html

  10. #10
    Standard RSP member
    Join Date
    11 Aug 2009
    Posts
    52
    Mentioned
    0 Post(s)
    Rep Power
    54

  11. #11
    Standard RSP member
    Join Date
    01 Jan 2008
    Posts
    98
    Mentioned
    0 Post(s)
    Rep Power
    60

    Default

    Am sa-mi fac timp pentru pregatirea serialului si am sa aduc vesti dupa!

  12. #12
    Standard RSP member
    Join Date
    01 Jan 2008
    Posts
    98
    Mentioned
    0 Post(s)
    Rep Power
    60

    Default

    Quote Originally Posted by karbit View Post
    cred ca e vorba despre o procedura prin serial, telesat spune:

    Potrebno je imati :
    TFTPD32
    backup_kernel
    putty
    Seriski Interface za povezivanje sa AZBoxom

    Potrebno je znati koja je IP adresa vaseg racunara, to mozete saznati ako udjete u command promt,
    znaci idete na Start pa u polje run upisete cmd i pritisnete enter, onda kucajte ipconfig i enter i dobicete info o IP adresi
    Predpostavimo da je IP adresa na vasem racunaru : 192.168.1.12 (potrebno u nastavku teksta)
    U tom slucaju biramo IP adresu za AZBox u rangu gde je IP od racunara , uzecemo recimo : 192.168.1.34

    1.Pokrenite TFTPD32
    2.Pokrenite Putty , prebacite na serial, upisite COM-port na kome je vezan vas seriski interfejs , pod Speed upisite 115200
    3.Povezite seriski interface sa AZBoxom i ukljucite AZBox
    4.Pratisnite CTRL+C da bi prekinuli bootiranje
    5.kucajte :

    setxenv y.ipaddr "192.168.1.34"
    setxenv y.gateway "192.168.1.1"
    setxenv y.subnetmask "255.255.255.0"
    net init
    load -b tftp://192.168.1.12/backup_kernel 0xb0100000
    pflash write -f 0x80000 0xb0100000 0x680000

    Sada cekate da prvo obrise deo FLASH-a , pa onda da upise novi sadrzaj.
    Ovo traje oko 5-6minuta , budite strpljivi da zavrsi i na kraju rebootajte vas AZBox.
    Ako je sve proslo kako treba, dobicete na TV-u standardni update koji vam je poznat,
    ubacite USB stick sa Oficijalnim FW-om i ubacitega kao i do sada.
    http://rapidshare.com/files/40839862...erial.rar.html
    Procedura de mai sus a functionat perfect, am utilizat o interfata cu MAX323 pentru a conecta serialul calculatorului cu procesorul!
    Acu deschid o bere! si am sa fac un tutorial daca sunt mai multi cu receptoarele bushite de E2

  13. #13
    Golden Member istvan's Avatar
    Join Date
    14 Feb 2007
    Location
    Baia Mare
    Posts
    396
    Mentioned
    2 Post(s)
    Rep Power
    65

    Default E2_1.0.21_elite_premium

    E2_1.0.21_elite_premium

    http://www.megaupload.com/?d=W8PZZJ5A

    http://rapidshare.com/files/406526152/patch.rar.html

    //EDIT:
    1. Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick
    2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.
    3. Follow the procedure USB Update on the screen, (patch version: 1.0.21 E2 by TheRipper, press OK, wait to finish, reboot - don't remove stick !)
    4. Start AZUp , write IP adress of AZBox (see VFD), then click on Update button on AZUp, wait and follow message on AZUp and VFD, when all done - wait for reboot msg on VFD and then remove USB stick
    RSP-TEAM

  14. #14
    Standard RSP member
    Join Date
    27 Jul 2007
    Posts
    25
    Mentioned
    0 Post(s)
    Rep Power
    0

    Angry E2_1.0.21_elite_premium

    am incercat sa pun E2_1.0.21_elite_premium pe azbox premium si a murit nu mai faci nimic am respectat toti pasi de instalare
    acum apare pe display: geek :P si rescue mode? ce sa fac sa pun pe picoare azboxul?
    Last edited by romix; 21-09-10 at 13:45.

  15. #15
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60

    Default

    incearca asta:
    ok, i am trying to go back to azbox firmware , i put original patch.bin in usb fat32, reboot, i get rescue mode and ip,and it says everytime at 80% unsupported firmware version! in AZup
    damn, what should i do now?

    edit: DON'T USE KGD FIRMWARE TO RECOVER. USE ORIGINAL OPENSAT'S FIRMWARE FIRST.OTHERWISE IT WON'T WORK IN AZUP

    edit2: after reboot azbox and close and open again AZup i managed to flash azbox back to original
    by @hfmls
    incearca pe portul USB din spate, eventual un fw original OpenSAT(0.9.3877)

    p.s. dar ai lansat AZup pentru finalizare?

    ---------- Post added at 13:06 ---------- Previous post was at 12:50 ----------

    If You want to load this version of Enigma 2 for AzBox HD Elite / Premium please follow this procedure :


    1 . Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick


    2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.


    3. Follow the procedure USB Update on the screen, after process is finished, remove the USB stick from the AzBox HD Device, and let AzBox HD to Reboot


    4. After reboot is finished, You should be in Enigma 2 AzBox HD Running state


    5. If You tested enough Enigma 2 on AzBox HD Device and want to be back on AzBox Official Firmware, it is piece of cake


    6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official AzBox HD Firmware e.g 0.9.5020 ) .


    7. Turn Off AzBox HD Device, put USB Memory stick in Receiver, and Turn it on.


    8. On VFD You will see RESCUE MODE and IP Address will be listed.


    9. On Your PC run application called AzUP by our team member telesat, enter IP of Your AzBox HD Device and click on UPDATE


    10. Wait that Update is finished, and You will have again AzBox HD Official Firmware


    This is totally RISK FREE Installation and Recovery procedure for AzBox HD Elite / Premium Devices !!!
    Last edited by qwess; 21-09-10 at 14:02. Reason: completare




    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •