E2 by the ripper

[le099]

Incet incet am ajuns sa o vedem si pe asta.

Elite/Premium

http://rapidshare.com/files/406526152/patch.rar.html

Preium Plus

http://rapidshare.com/files/406526152/patch.rar.html

Tzin sa va anuntz ca inca nu este oficiala, mai este cate ceva de munca. Nu vede tuner, wi-fi, tasta power telecomanda nu functioneaza si o multime de crash.

Here is make file for OE od DM 800 , 2 small diff files for sources which have to be changed ( for FB , and for priority of process for Kernel 2.6.22-19 ) and .config file for Kernel 2.6.22-19 .

Makefile-opendreambox-1.5 ( for whole image , crosscompiler, and all lib's etc. )

All files provided by the_ripper, thanks goes to him.

config.rar - 0.01MB
http://www.zshare.net/download/7823646916e73af0/
diff.rar - 0.00MB
http://www.zshare.net/download/7823647979c8117f/
Makefile-opendreambox-1.rar - 0.00MB
http://www.zshare.net/download/78236504f351da24/


Intoarcere dela E2 la AZ

copiare "update" in /tmp (settare a 755)
copiare "backup_kernel" in /MMP

in telnet (se non avete putty o simili ) :
start->esegui -> (scrivere: ) telnet IPDECODER
una volta loggati (root , azbox)
digitate : cd /tmp
in tmp, digitate: ./update /MMP/backup_kernel
e il decoder esegue il ripristino alla predisposizione a ricevere da usb il file patch.bin (con firmware az o sempre E2)





Notitzia este preluata de pe sif

[radu67]

Stie careva cum pot sa revin la versiunea anterioara?
Am instalat Enigma 2 iar revenirea nu a mai fost posibila si acum apare "Booting" si atat!

[karbit]

Recovery procedure
__________________
　
* For all people which have a problem with fleshing Enigma 2 in AzBox , where installation stop ~58% and now have a BOOTING message on display.
You will need :
- Application Acronis True Image
- E2Backup.tib
- External HDD case with IDE controller ( or if You are working on PC, Motherboard which have IDE controller ) .
Take the DOM from AzBox and connect it with IDE connector from Your external usb case for HDD .
Connect the red wire from power cable ( 4-pin Molex connector ) from case ( +5V ) ( picture: Molex and pwrcom ) with right oriented pin on connector which is on DOM - pictures DOM1 and DOM2
Connect USB cable from the HDD case with Your PC.
Now, startup Acronis True Image application, and choose Recovery from the menu on right side - picture 1
Choose Disk Recovery on the top of the window and load file E2Backup.tib and press next - picture 2
Choose Recover whole disk and partition and press next - picture 3
Check-all whole Disk, so it means two partitions : Ext3 and Linux Swap and press next - picture 4
Choose on which disk You will restore content, in our case DOM, and press next - picture 5
Commit with OK - picture 6
Choose Proceed - picture 7
Wait for few minutes that process complete - picture 8
When the restore of data and partitions finish, press Ok - picture 9
now You can exit from application, 'Safely' eject Your external USB HDD, in our case DOM.
Disconnect usb cable, and put back the DOM on AzBox, turn on AzBox and wait for 20 seconds that E2 boot.
Now you can take a look on enigma, and when You decide to go back on Official version of Firmware, that You can do with plugin from DDdamir.
Installation od DDamir plugin is described in another tutorial.

http://rapidshare.com/files/407099608/Recovery.rar.html

[radu67]

Nu a mers asa deocamdata! Cred ca va trebui sa-i rescriu flash-ul!
Astept orice ajutor si sugestii, sunt in Timisoara.

[zmeura]

Deci cu asta se ocupa creatorul mbox.Scuze de offtopic.

[le099]

Nu a mers asa deocamdata! Cred ca va trebui sa-i rescriu flash-ul!
Astept orice ajutor si sugestii, sunt in Timisoara.

http://www.azboxhd.org/ripristino-az...dware-e-yamon/

[karbit]

Nu a mers asa deocamdata! Cred ca va trebui sa-i rescriu flash-ul!
Astept orice ajutor si sugestii, sunt in Timisoara.

daca esti din timisoara gasesti sigur un sirb sa-ti traduca toata procedura de mai jos, care este o explicatie la ce am postat mai sus si care este o procedura care functioneaza sigur. un raspuns dat de telesat

Prijatelju , umesto da pravis scene , pokusaj jos jedanput da vratis backup koji sam postavio u prvom postu u ovoj temi.

Hajde da objasnim jos jedanput jer mislis da TI imas neku cudnu i situaciju.
Nema tu cuda , situacija je prilicno jednostavna :
Kad si ubacivao E2, uradio si sledece :
1.Krirao 2 particije na DOM-u
2.Ubacio novi kernel
3.Kopirao fajlove od E2 na DOM-u

Tebi je puklo na 58% u tacki 3.), sto podrazumeva da su prve dve prosle, a to znaci da je trenutno stanje u tvom azboxu :
1.Imas novi kernel
2.nemas sve fajlove od E2 u DOM i zato se nemoze podici box

Resenje koje sam ponudio je prilicno jednostavno , samo moras ga odraditi kako treba , a to je - postavljen je dump mog DOM-a na kom je instalirana enigma ali koja provereno radi, i ti treba da to vratis (kako je opisano) u tvoj DOM , nakon toga , ako to odradis kako treba , dobices E2.

Ako ti i dalje stoji BOOTING , to znaci da nisi vratio sadrzaj DOM-a i nista drugo.
Posto je i drugima prosla procedura vracanja Dump-a od DOM-a sa E2 , to samo ukazuje da je Dump ok, sto pa znaci da je problem , kako sam vec rekao , iskljucivo i jedino kod tebe ustvari u sam proces koji ocigledno ne radis kako treba.
I jos bih te zamolio da umestod a teras inat - da pokusas da ponovis proceduru a pre toga procitas pazljivo.
Ako i tada ne uspe , onda pokusaj da nadjes nekoga ko se bolje razueme u ovo i da ti pomogne da resis problem, jer veruj, nema misterije , stavr je prilicno jednostavna

[radu67]

Tocmai ca procedura de mai sus nu a mers, banuiesc ca-i bushit bootloaderul!